How to Use Ford VCM II VCM 2 IDS For Ford V101.03 Mazda V94

OEM FORD VCM II is one of best recommended diagnostic scan tool that works with the Ford IDS diagnostics application running on a PC to diagnose Ford, Mazda —so on vehicles.Ford VCM II VCM 2 IDS For Ford V101.03 Mazda V94 also has WIFI version available,see here : Ford VCM II With WIFI .And now both version in BUYOBDII.com at a great price. And following is a step by steps guide on how to use Ford VCM II VCM 2 IDS Diagnostic Tool For Ford Mazda,hope it will be useful.

2017 Ford VCM II Preview

7-1
Notice Tip Customers Need to know before installation VCM 2 For Ford & Mazda

1.Disconnect the internet and close your anti-virus software。

2.TWO Software(For Fd/For Md) must be installed on different PC with WINDOWS XP DSP 3 or Win7 32bit system.

3.Assure th working voltage is 14V

Ford VCM 2 For Ford IDS V101.03 User Manual

1. Turn the computer time to January 1, 2016.
2. Open IDS-91.01-FULL,start to install V91 first,choose the language you want.Accept all,and press next.Install and save it in C disk,don’t change the save route. And the software need about 4GB space to install.Usually it will take 30mins-1hour to Update database.

3 Open the Ford IDS logo in your desk now,put information(ignore),then it ask for your computer time is not right.(if you have change to 2016.1.1,then ignore it here)Then it tell you only have 3 days,need activated it.(Ignore it now,press next)

4.Open the CD disk folde, Install V101.01_FULL, then install V101.02, and then install V101.03, then running IDS_V101.03, you can also got 3 days trial.
4. Activated the license,copy your key from DFstd-key.Then ready to install the Deep Freeze,this software will come out automatic.

7-2

5. When 3 days trial used, Adjust the computer time to the date of installation(1/1 2016) will get another 3 days.

OEM Ford VCM II For Mazda V94 User Manual

VCM2 chip board is for IDS software V101, if you want to work with for mazda v94, need downgrade the firmware first.And following is a step by steps downgrade guide

1.After opening the software,insert the device’s USB interface.
2.After waitting for the program to connect to the VCM2 device,the eject is shown in figure,select X.

7-3

3.In the second pop-up dialog box,select the hook number.

7-4

4.Disconnect all the connecting device, unplug the black glue sleeve from the USB port,and then select the hook number.

7-5

5.To find the small buttons next to the SD card slot,press the button,and then insert the USB, waitting for the device buzzer sound,release the press button,select hook number.

7-6

6.Pop up as shown in the dialog box,waitting for the progress bar read finished

7-7

7.As shown in figure,select the hook number,the device has been successful brush machine to V94

7-8

How to activate Ford VCM2 IDS Special Function

Ford VCM2 IDS Special Function

With Ford VCM 2 clone with IDS, how to enable or activate Special Function in the menu Module Programming/Programmable Parameters/Car Configuration Parameter(s)? Here is the how-to guide from a CT member. It’s a customer experience; try at your own risk.

Ok just had a play and i managed to get to enter the code (here: 60274)

I found where IDS stores these codes:
C:\Program Files\Ford Motor Company\IDS\Runtime\Registry.xml
Under <key name=”UPDATEFUNCTIONS”>
Going to try them out.
Enter the code
00008 – IDENT_APPLY_PATCHES_VIA_FLOPPY
00009 – IDENT_UPDATE_PTU_FROM_FLOPPY
32287 – IDENT_LAUNCH_APP_MCP_REST
60503 – IDENT_LAUNCH_REGRESSION_RECORDER
27001 – IDENT_LAUNCH_FT_EOL_CP_MZ_01
32247 – IDENT_LAUNCH_SERVICE_ROUT
24040 – IDENT_ENABLE_VALIDATION_MODE
24041 – IDENT_DISABLE_VALIDATION_MODE
23761 – IDENT_LAUNCH_APP_FT_DATA_REC
81105 – IDENT_LAUNCH_APP_TSBSSMLIST
53061 – IDENT_IGNORE_MCP_INHALE
26503 – IDENT_LAUNCH_APP_VVAG
81104 – IDENT_LAUNCH_APP_FTW_SHIP_MODE_01
29124 – IDENT_TOGGLE_FORD_EXTRANET_INTRANET_URLS
60274 – IDENT_LAUNCH_CCC_ENGINEERING_APP
32227 – IDENT_LAUNCH_PROPSHAFT_BAL_APP
48712 – IDENT_LAUNCH_GENERIC_RCM_CONFIG_APP
28487 – IDENT_LAUNCH_FT_ICCMSP_MZ_01_APP
28097 – IDENT_TOGGLE_BATTERY_MONITORING
70263 – IDENT_LAUNCH_GENERIC_DIAG
71863 – IDENT_MCP1
63296 – IDENT_LAUNCH_FTW_RKE_MODE_01_APP
08080 – IDENT_LAUNCH_DETAILED_NETWORK_DIAG
32267 – IDENT_LAUNCH_APP_ENG_SUPPORT_TOOL

2-1 2-2
Enter the code 60274
It changes the ccc option in module programming to a different list with more options and also appeared to give me icons to read and write dumps,
But I ran out of time to play more and see what options did, I did try to disable my seat belt off warning buzzer but it failed to work, Other peoples input would be nice once you test it…
See my photos, get the first page up as shown then click update/ special functions on your right hand side
As for getting nothing to appear in special function through VCM2 IDS, i had two option in there, read config file and modify, Also for me the tool box module programming, 3rd option down had changed to allow what i would normally alter within ccc as well as a as built option which i do not normally see on this year of car, It had speed items for one listed, were as this is found on later fords than mine in the pcm on first page.

2-4
2-5