What the difference is among lexia 3 full chip, Diagbox and Peugeot Planet PP2000, which would be a good idea for a total newbie in car diagnostics software that lexia 3 full chip cable required.
Both Diagbox and PP2000 are used to connect to the car’s ECU and carry out diagnostics and manage settings. Which is a better software, however?
lexia 3 full chip: Citroen
Planet: Peugeot
Diagbox: Citroen & Peugeot
lexia 3 full chip3 – hardware
lexia 3 full chip – Software for Citroen
Planet – Software for Peugeot
Diagbox – Front end which contains variations of both of the above
Diagbox is the only one which is still updated.
The hardware is currently on Revision C.
Diagbox: newer, PP2000: quicker
PP2000 and Diagbox are roughly the same thing , Diagbox being the newer software ,
PP2000 is a quicker software but will become obsolete over the next few years as Peugeot will stop using it this year ,
no point in getting PP2000 then having to change to Diagbox
Peugeot Planet: easier and faster
I have planet and also being a newbie installed planet then diagbox they both worked fine though diagbox was a lot slower (you have to start diagbox then choose planet off the option list) so basically if its just for use on your own car then using planet on its own is easier and faster though if your going to attempt using the interface on other vehicles may as well install diagbox with planet and lexia 3 full chip
lexia 3 full chip + PP200 = Diagbox
lexia 3 full chip is for citreon
planet pp2000 is for peugeot
put both programmes into one software = diagbox
if your going to buy it you might asswell get diagbox which most new interfaces come with anyway.
Both lexia 3 full chip & PP2000 available within Diagbox
They are the same…. the discs supplied usually contain PP2000 and Diagbox on one disc (PP2000 is also available within the Diagbox installation), and lexia 3 full chip for Citroens on the other. lexia 3 full chip is also available within Diagbox.
So if you find an interface with rev C, the software discs will contain everything you need and more.
PP2000 on 32-bit, Diagbox on 64-bit
Planet will only run on 32-bit. Diagbox will run on 64-bit, but when you try to call Planet through Diagbox it will crash because it must have 32-bit.
What I do is install VMWare Player (free). Using that, create a virtual machine XP SP3 32-bit (you will need the disk and key). Then install Planet into that. Works well. Sounds very techy, but it is surprisingly easy, because VMWare is so well documented. When installing Planet, do not plug the lexia 3 full chip interface in to the PC until prompted.
Planet & Diagbox are software lexia 3 full chip cable required
The lexia 3 full chip is the cable required to use the software. Only the cable.
To use the cable you will need software as well, Peugeot Planet and Diagbox are the 2 pieces of software to choose from.
Diagbox is much newer software that supports even the latest cars. However I prefer the interface of Peugeot Planet, much easier not to get lost in there.
Generally when you buy a Mileage Correction lexia 3 full chip software will be included on a disk. As to whether it is genuine or not, you should check with the seller before purchase.