Where can you download Ford UCDS Software Freely?

Ford UCDS Software Free Download:

Ford UCDS V1.26.008(It is made in China,price is 58USD)



Ford UCDS Download only available on official website:

Ford UCDS is from original,price is about 110 EUR-270EUR)



Ford UCDS is Universal CAN Diagnostic System for ford vehicles. Ford UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual UCDS-programm. Ford ucdsys software version is V1.26.008, doesn’t need activate.



Ford UCDS Features:

– Diagnose the majority of car parts and components that are connected to a central electrical module (GEM, BCMii) through the data bus (CAN);

– Receive data embedded in the car components and modules, including their part number, version, calibration, serial number;

– Make the necessary changes to the central configuration of the car, and change the configuration of the modules and components if necessary;

– Update the calibration (firmware) of the modules and components of the vehicle, including the engine (the so-called chip tuning);

– Perform regular language adaptation of the audio modules manufactured by SONY (Russian language only);

– Upgrade (replacement) of the door modules software to activate the automatic folding door mirrors.

– Other…


Ford UCDS Functions:

1.Read the fault code

2.Clear trouble codes

3.Read the data stream

4.Data recording

5.Module reset

6.Module Installation

7.Re-program the ECU TCM BCM and so on

8.Clear the airbag (RCM) collision data

9.Read, backup, edit, and erase AsBuilt files

10.Read, backup, edit, and erase the underlying DirectConfig configuration file

11.Support ECU chip tuning, eg: Ford Focus 3 150HP -> 163HP, Ford Mondeo 2.0T 200HP -> 240HP, Focus 2012 Year 85HP -> 105HP, 150HP -> 163HP

12.Support VBF file directly to write

13.Support BIN file directly to write

14.Support online update vehicle entire module (Update Wizard)

15.Support Focus MK2, 2012 Focus MK3, Mondeo, S-Max and other models mileage programming


Ford UCDS Support Modules:

IPMA  Image Processing Module A

GWM  Gateway Module A

BCM   Body Control Module

ACM   Audio Control Module

PSCM  Power Steering Control Module

HCM   Headlamp Control Module

PAM   Parking Aid Module

RCM   Restraint Control Module

DCDC  DC to DC Converter Control Module

ABS   Antilock Braking systme

CCM  Cruise Control Module

OCS   Overdrive Cancel Switch

SPRM  Speech Recognition Module

ICM   Instrument Cluster Module

FDSM  Front Distance Sensing Module

SASM  Steering Angle Sensor Module

CPLRM  Change Port Lgiht Ring Module

FCDIM  Front Control/Display Interface Module

ACCM   Air Conditioning Control Module

APIM   Accessory Protocol Interface Module

PCM    Powertrain Control Module


Ford UCDS Support Ford Models:

Focus II 2004-2011

Focus III 2011

Kuga I

Kuga II


Mondeo 2015

Fiesta 2008

GALAXY/S-Max [CD340]-2006-2010

GALAXY/S-Max [CD340] -2010–>

Mondeo IV [CD345]-2007-2011

CMAX [C344]-2011–>

Focus III [C346]-2011–>

Focus III [C346] MCA 2015.25–>

Kuga II [C520]-2013–>

Fiesta [B299] 2008-2013

Fiesta [B299] 2013–>

BMAX [B232] 2013–>

Transit [V347] 2006-2013

Transit [V363] 2014–>

Transit Connect [V408] 2014–>

Transit Courier [B460] 2014

Transit Custome [V362] 2013–>

EcoSport [B515] 2013–>

Explorer [U502] 2010–>

Mondeo (Euro) [CD391] 2015–>


And for Newest Ford UCDS,it can support Mazda:

Mazda 2

Mazda 2 2015–>

Mazda 3

Mazda 3 2013–>

Mazda 5 2005–>

Mazda 5 2010–>

Mazda 6 2006–>

Mazda 6 2013–>

Mazda CX-3 2015–>

Mazda CX-5

Mazda CX-5 2016–>

Mazda CX-9

Mazda CX-9 2016



UCDS Ford VS. Ford VCM II:


1.UCDS support special functions like: VBF LOADER, UPDATE WIZARD, DIRECT CONFIG

2.UCDS support more vehicles than vcmii

3.UCDS support odometer correction, while VCMII can’t

4.UCDS support both online and offline programming, while VOBDII can only support online programming.

5.UCDS support the reconfiguration of the car, the engine firmware stock firmware, chip tuning, vcmii can’t.

6.VCMII support key programming, while UCDS can’t



UCDS 1.26.008 has the same data as the ids v102.

How To Factory Reset Your VCM II when Inoperable

Here is an easy way— factory reset, for you to fix your Ford VCM II when it becomes inoperable. For example, VCM II will not boot-up properly, Ford VCM II LED’s not functioning properly, etc.
1. Shut down the IDS application if it is running.
2. Disconnect the VCM II DLC cable from the vehicle.
3. Disconnect the VCM II USB cable from the VCM II and PC.
4. Remove the rubber boot on the VCM II that is opposite the DLC connector to expose the Recovery Mode Switch.


5. Start the IDS application.
6. Press and hold the plastic tab. Do not release the tab until Step 9.
7. Connect the VCM II to the PC using the USB cable.
8. Wait for the VCM II’s Power LED to remain on and for the unit to beep.
9. Release the plastic tab – the VCM II will be in Recovery Mode.
10. The IDS pop-up window below will appear notifying the user that a new version of VCM II software is available. Select the Tick button to update the FORD VCM software.
11. Follow the IDS on-screen instructions to complete the software installation.


Hope it help you guy out.

Why do you need have VCM II firmware recovery?

Why do you need have VCM II firmware recovery?

You Chinese clone that after flashing says beep every second …
or firmware in the clone for IDS84 program , and you want the software to IDS86 …
or you have violated the data on the memory card or memory card is broken …


Is it safe to do Ford VCM II recovery?

Not really. ALL can be done AT YOUR SOLE RISK . You’d better SAVE YOUR OLD MEMORY CARD .

How to do VCM II recovery?

Install a clean copy of the operating system, this system must not be connected VCM2
2. Install the drivers for all devices and update system
3. Download files from the links below
4. Disable updates Disable Firewall, Disable Web
5. Set the date on your computer September 1, 2013, and disable time synchronization via the Internet.
6. Set IDSv86 on your system.
7. reboot
8. kill the following processes if they are running:
9. This item is optional.
unzip the boot.zip and put it in the folder “C: \ Program Files \ ford motor company \ IDS \ system”
that is, the full name of the folder should be “C: \ Program Files \ ford motor company \ IDS \ system \ boot”10. Apply the patch from attachments. Up to this point NOT connect device VCM2. 2nd item when using the patch (for VCM 2).
11. Reboot
12. WARNING! your device VCM2 must not connected wires.
13. Remove the side cover from VCM2 with the side where drawn Wifi, install the card 4 or 8GB depending on what was installed in your device. Commonly usedclass 4 cards
14. Press the plastic button (to the quiet click) but not much, because the Chinese are very fond of buttons to break.
15. connect the +12 v supply through connector. (Continue to hold the button)
16. Wait a few seconds, the red light, but you must continue to hold the button. When a beep sounds immediately release the button.17. Wait about two minutes (visually nothing will happen), connect the USB cord from VCM2 to computer.
18. Start Bosh VCI MANAGER. Once connected, you will see your VCM2 in recovery mode.
19. click on “Restore” button and go to drink coffee, it takes about 40 minutes.
20. after flashing VCM2 automatically reboot. (If, after repeated firmware situation BEEP 1 second, you can try to do firmware lower software version number,

eg 84 or 85)
21. Wait 2 minutes.
22. unplug all cables from VCM2
23. Restart the computer, wait for the full load and run the IDS86 (VCM2 not connected). on offer data entry, enter the dealer Ford / Mercury / Lincoln,

dealer code UR097, country Russia
24. Wait until the start IDS86 and connect the device.
25. system will install the drivers and communication protocols VCM2

Everything should work!

p.s. If you broke the paragraph 14 of the button to close the tweezers solder contacts or temporarily remote button on the wires.

If this does not help, follow instructions at the end of all the action as follows:
26. Reboot
27. Press the reset button, plug in the +12v to VCM 2, wait for beep, release the reset button
28. Start IDS86 and wait until the boot
29. Connect VCM2 USB cable to the computer program IDSv86 should offer to update the firmware of the device.
30. Update the device.
31. after flashing VCM2 automatically reboot. (If, after repeated firmware situation BEEP 1 second, you can try to do firmware lower software version number,

eg 84 or 85)
32. Wait 2 minutes.
33. unplug all cables from Professional Diagnostic Tool VCM2
Now exactly Everything should work!

How to install Ford IDS V108 software

Latest Ford IDS V108.01 Full Software for Ford VCM 2 support online programming released on Jan. 2018.

Software Version: 108.01. No need activation.


Operating system: Windows XP/Windows 7 32/64 bit



Tested with ford vcm clone and VXDIAG VCX NANO Ford: Never failed!!

Online programming: Supported! but you should have an account yourself.

Ford IDS v108.01 function: Confirmed!

1.Able to download the very latest calibration files/software from Ford server if the network connection available at the time of connecting to vehicles

2.Read and decode fault codes

3.Delete fault codes

4.Display System current parameters in digital form

5.Combined displaying of data

6.Logs Keeping: write and keep of digital parameters in memory

7.Special functions: changing of permissible seeting of blocks, programming etc.


Q: Whether it can work with Ford VCM 1 Clone?

A: Yes, it can work with Ford VCM 1 clone

Q: Is this vmware or native

A: This is native, install on new and clean windows xp/7

How to install Ford IDS V108 step by step?


1. Please backup the important files on the desktop and disk C because the next operation will cover the content in the disk C.

2.Disable both local area and wireless network connection

3. If your computer hard drive only has one partition, please prepare a 16 GB U flash drive, if has 2 partitions, please unzip the software of CD into another partition except disk C

Step 1: Recover System
Open Software D (Disk D)

Create new folder Ford 108

Copy all zip file on Ford 108-2 software CD to Ford 108 folder
Eject Ford 108-2 DVD-ROM to DVD/CD-RW Drive

Copy all contents to Ford 108 folder again
Extract ford108.part01 zip files to Ford 108 folder

Then delete all other zip files, ford108.part01-ford108.part33
(only 3 files left)
Open Ghost 8.0

Recover system, choose destination D:/Ford 108/ford108.GHD
Restart computer and recover system


Step 2: Install Ford IDS 108 Setup


Run Ford Module Programming Limit as Administrator
Ford Extension Success, press OK
Module programming has been extended to 2018/05.26


Click on Start menu->All Program->Bosch->VCM Manager (Ford-VCM-II)
If system prompt PC software initialization error, press OK to ignore
Open Disk C/Progam Files/Ford Motor Company->IDS->Runtime->install3rdparty->
ETAS, Run setup as Administrator


Install Bosch VCI software Ford VCM II


click Next
Select Remove Bosch VIC software from your computer, click Next

Press Remove
Click Finish
Again run setup as Administrator
click Next


Ready to install the program
Click Finish

Install setup completed.

Step 3: Make Connection
Click Start menu->VCI Manger (Ford-VCM-II)


Connect VCMII with computer follow the diagram below


Open Computer->Manager->Device Manger->Network adapters->ETAS VCI USB RNDIS Device
to check connection is built


Open Network and Sharing center->Change adapter settings
Make sure you have disable both local area and wireless network connection


Step 4: Run software

Open Ford IDS v108 software on desktop


Network test, gathering vehicle data


check language options, programming modules and options



How to Use Ford VCM II VCM 2 IDS For Ford V101.03 Mazda V94

OEM FORD VCM II is one of best recommended diagnostic scan tool that works with the Ford IDS diagnostics application running on a PC to diagnose Ford, Mazda —so on vehicles.Ford VCM II VCM 2 IDS For Ford V101.03 Mazda V94 also has WIFI version available,see here : Ford VCM II With WIFI .And now both version in BUYOBDII.com at a great price. And following is a step by steps guide on how to use Ford VCM II VCM 2 IDS Diagnostic Tool For Ford Mazda,hope it will be useful.

2017 Ford VCM II Preview

Notice Tip Customers Need to know before installation VCM 2 For Ford & Mazda

1.Disconnect the internet and close your anti-virus software。

2.TWO Software(For Fd/For Md) must be installed on different PC with WINDOWS XP DSP 3 or Win7 32bit system.

3.Assure th working voltage is 14V

Ford VCM 2 For Ford IDS V101.03 User Manual

1. Turn the computer time to January 1, 2016.
2. Open IDS-91.01-FULL,start to install V91 first,choose the language you want.Accept all,and press next.Install and save it in C disk,don’t change the save route. And the software need about 4GB space to install.Usually it will take 30mins-1hour to Update database.

3 Open the Ford IDS logo in your desk now,put information(ignore),then it ask for your computer time is not right.(if you have change to 2016.1.1,then ignore it here)Then it tell you only have 3 days,need activated it.(Ignore it now,press next)

4.Open the CD disk folde, Install V101.01_FULL, then install V101.02, and then install V101.03, then running IDS_V101.03, you can also got 3 days trial.
4. Activated the license,copy your key from DFstd-key.Then ready to install the Deep Freeze,this software will come out automatic.


5. When 3 days trial used, Adjust the computer time to the date of installation(1/1 2016) will get another 3 days.

OEM Ford VCM II For Mazda V94 User Manual

VCM2 chip board is for IDS software V101, if you want to work with for mazda v94, need downgrade the firmware first.And following is a step by steps downgrade guide

1.After opening the software,insert the device’s USB interface.
2.After waitting for the program to connect to the VCM2 device,the eject is shown in figure,select X.


3.In the second pop-up dialog box,select the hook number.


4.Disconnect all the connecting device, unplug the black glue sleeve from the USB port,and then select the hook number.


5.To find the small buttons next to the SD card slot,press the button,and then insert the USB, waitting for the device buzzer sound,release the press button,select hook number.


6.Pop up as shown in the dialog box,waitting for the progress bar read finished


7.As shown in figure,select the hook number,the device has been successful brush machine to V94


How to activate Ford VCM2 IDS Special Function

Ford VCM2 IDS Special Function

With Ford VCM 2 clone with IDS, how to enable or activate Special Function in the menu Module Programming/Programmable Parameters/Car Configuration Parameter(s)? Here is the how-to guide from a CT member. It’s a customer experience; try at your own risk.

Ok just had a play and i managed to get to enter the code (here: 60274)

I found where IDS stores these codes:
C:\Program Files\Ford Motor Company\IDS\Runtime\Registry.xml
Under <key name=”UPDATEFUNCTIONS”>
Going to try them out.
Enter the code
71863 – IDENT_MCP1

2-1 2-2
Enter the code 60274
It changes the ccc option in module programming to a different list with more options and also appeared to give me icons to read and write dumps,
But I ran out of time to play more and see what options did, I did try to disable my seat belt off warning buzzer but it failed to work, Other peoples input would be nice once you test it…
See my photos, get the first page up as shown then click update/ special functions on your right hand side
As for getting nothing to appear in special function through VCM2 IDS, i had two option in there, read config file and modify, Also for me the tool box module programming, 3rd option down had changed to allow what i would normally alter within ccc as well as a as built option which i do not normally see on this year of car, It had speed items for one listed, were as this is found on later fords than mine in the pcm on first page.