The Cheapest way to programming Nissan Consult 3 Plus

MB SD Connect C4 plus should be the best DOIP diagnostic tool,the new SDconnect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip.

 

MB SD Connect C4 Plus Feather:

1.When it upgrades the firmware, you don’t need to install the batteries as the old SDC4, which is convenient and avoid the damage to the hardware.

2.The Wifi will be automatically connected after starting on SDC4 and it is very stable. You can use the WIFI to surf the net and diagnose Benz, so the testing job can be finished remotely.

3.New SDC4 is made of superb craftsmanship and good quality, waterproof, shockproof and tamper-proof.

4.Can directly run the original software.Can run DTS and Vediamo engineering software.

5.Can work with the 24V truck. Skip to the last paragraph for sdconnect c4 plus coverage.

 

New SD C4 Plus 1:1 copy wins vxdiag c6 in:

vxdiag c6 also can be used to diagnose Benz DOIP, its software and driver are modified, and it can’t run the original software.

While 2019 SD C4 1:1 copy is able to run the original software.

 

New SD C4 Plus 1:1 copy wins old SD C4 in:

New SD C4 1:1 copy firmware update doesn’t need to install the battery, while old SDC4 needs.

 

2019 SD C4 Plus 1:1 copy Xentry test DOIP: No Issues

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

 

SD C4 Plus 1:1 copy Mercedes Xentry Coverage:

Passenger car, Van, Truck, Unimogs, Busses, Super sports cars, Industrial major assemblies, Special procedures.

21

22

23

24

25

26

27

28

Software introduction about 2018.12 MB Star SD Connect C4 C5

Newest version 2019.07 MB Star SD Connect C4 C5 diagnostic software has been tested and verified no issue with SD Connect C4/SD C5 multiplexer.

 

Software languages: Chinese, English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish.

 

Software includes:

1.DAS 2019.07: the automatically Diagnosis Assistance System

2. Xentry 2019.07: New software released by Bennz Company after 04/2009 by diagnosis new cars.

3. WIS net 2019.07:Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

  1. EPC.net 2018.09:Electronic Parts Catalog
  2. ST Finder:Part Location Finder options: 2008 and 2016
  3. STARUTILITIES :the movement management system and self-test
  4. SD MEDIA 2014
  5. PL72: 2018 Mercedes software with PL70
  6. Engineer Software:DTS monaco V8.03 And Vediamo V5.01.00 Support Offline Programming
  7. HHT Software for old cars

 

Xentry software display:

Note:

The 12.2018 MB Star SD Connect C4 C5 software can support HHT-WIN.But this HHT can only support some old Mercedes cars (before 1996). If you need to support all the old Mercedes-Benz (before 1996) please use 2016.06 MB Star SD Connect C4 C5 with HHT diagnostic software, this version with HHT software can support all the old Mercedes-Benz diagnostics.

 

How to activate 2019.07V MB Star DAS & Xentry ?Please check the link.

MB SD Connect C4 computerlaptop issue (solved)

We have customer confuse about the MB Star C4 laptop issue. What laptop should i use and why Dell D630 laptop is most used? Can i use other laptops with SD Connect C4?

Solution from obd2tool
It depends on which format HDD you choose to buy
1.
If you buy Dell D630 internal hard drive/solid drive (we only have D630 format internal HDD currently), you should install internal HDD on Dell D630 laptop ONLY.

2.
If you buy external HDD, there is no laptop limitation. But make sure your laptop meets the requirement.
Star diagnostic External HDD/SSD laptop requirements:
CPU 2.0
RAM 2GB

better with COM port, if it does not have COM port, you can buy Z-TEK USB1.1 to RS232 Convert Connector (if use MB Star C3) to transfer.
If you use laptop lower CPU2.0 with external HDD, the HDD works but runs rather slow. BTW,external HDD does not support WiFi wireless connection.

Both our customer and engineer tested and verified Dell D630 laptop is the most safe option.

Our Dell D630 configuration:
Brand: Dell
Type: Laptop/Notebook
Screen Size: 14.0
Memory (RAM): 2000 Processor Type: Intel Core 2 Duo
Primary Drive: DVD+/-RW Processor Speed: 1.80 GHz
Processor Configuration: Dual Core
Memory: 4GB

mb-star-compact-3-with-dell-d630-1 mb-star-compact-3-with-dell-d630-2 mb-star-compact-3-with-dell-d630-3

SD Connect C4 “Internal Error CSD DLL not found”

Can somebody help me? I bought the Mercedes-Benz SD Connect C4 diagnostic system. Then the first cat (real car) I hooked up to this is what came up.
internal-error-csd-dll-not-found

Solution shared by customer:

I fixed it.
Updated firmware in MB SD C4 interface and new key.

DAS Developer mode add Cruice control to Vito viano W639

For adding cruise control on vito viano w639
It is not my discovery, i find that on internet.

Add cruisecontrol / limiter to your Vito/Viano W639 it’s configuration.
This should work for all W639 till AJ08

In DAS Developer mode tested version 10-2008)

Used with MB SD C4 multiplexer

In engine control unit:
Entwicklungen (Development data) ->F3
Password : flexecu ->F3
Steuergerate – Anpassungen (Control unit adaption) ->F3
Steuergerate-Anpassungen (Variantencoderierung) ->F3
VCD_Transporter->F3
a Pop-up tells you : “Mindest eine Codiereinstellung ist ungultig” confirm -> OK

Here you will find the option settings
write down the line that is blue.
For example : NSG or NAG_Klima_Wasserstandschalter

Now we search for the string that contains the same options + Tempomat and Begrenzer
So that will look like : NSG or NAG_Tempomat_v-Begrenzer_Klima_Wasserstandschalter
Once you find it , click it and confirm with ->F3
“Soll die Codierung in Steuergerat ubertragen werden ?”->F3
JA or YES->F2 to proceed

Now we log out the engine ecu and go to the :
Instrument Cluster ( Kombi instrument) (Magnetti Marelli)

Steuergerate-Anpassungen (Variantencoderierung) ->F3
Variantencoderierung Algemeine Daten->F3
Scroll down untill you see “Limiter” set to Ja or Yes ->F3
F2 -> F1 -> F1
Ansteuerungen -> Gesamstliste aller Ansteuerungen ->
Scroll down untill you see the line : Steuergeraet Resetten (PowerON-Modus) (FN_Reset_SG_Power_ON)
Press F3 and confirm again with F3
Now you will see the “Kombiinstrument” reboots

Cruise control coding is added succesfully to your W639 now

12.2018 Xentry install Laptop and SDconnect C4 NOT connected (Solved)

Problem:

Have all install Xentry 12.2018 and no Errors, all activated but the laptop and the head SD Connect C4 is not connected

Software:

I have on my HDD installed on Windows xp with Xentry 07.2015
But i change the HDD whit SSD and install Xentry 12.2018

Firmware:

OS: 2.3.20130523
CSD: 2.11.20150601

Solution 1:

Check LAN property Ipv4 the correct address:
IP:                 172.29.127.100
Subnet Musk:  255.255.255.0
DNS server preferred:  8.8.8.8
then go in C/Program(86)/Mercedes Benz/Xentry/Bin/ZBus.ini and change “java\bin\javaw.exe” to “java\bin\javax.exe” (without quotation marks)

Solution 2:

The problem can be solved by installing sp1, try to upgrade to windows 7 sp1 ultimate..
As it installs the latest Microsoft visuals and so on…

Solution 3:

install fresh copy of win 7 and new Xentry

SDconnect C4 and Xentry installation help:

Use the link and you’ll have no problem of Xentry installation issues

SDconnect-C4-NOT-connected-1 SDconnect-C4-NOT-connected-2 SDconnect-C4-NOT-connected-3 SDconnect-C4-NOT-connected-4 SDconnect-C4-NOT-connected-5

Top Alternatives to Mercedes Star Diagnostic Scanner C3 & C4 Tool

mb-star-c4-1

In our opinion, there are better alternatives for those who like to do their own troubleshooting. Whether you are a repair shop a Mercedes-Benz owner consider these scanners as well.  Note that we do not endorse any of the following OBD II / CAN scanner brands. Links to obd2tool.com listing are provided if you need to check current prices.

If you are looking to purchase a Star Diagnostic System with Xentry for Mercedes-Benz there are a few things you need to consider.

Learning Curve: In order to use the diagnostic scanner properly you need to learn how to use the Xentry software. While reading, clearing fault codes is not very difficult anything besides that requires that you have proper training. Yes, you can find a few guides online on how to perform certain programming using Xentry but if you don’t perform the programming accurately you may end up causing more problem than you solve.

Consider Genuine Scanner: The only problem is that they are quite expensive and require a yearly license. If you are considering to buy a clone of the scanner made in China keep the following concerns in mind.

SCN Online Coding: Unless you buy the scanner from the official Mercedes-Benz source, you will not be able to perform SCN coding of control units. That’s because Mercedes Star Diagnostic scanner will try to connect to Mercedes-Benz database for verification of SCN code in order to program certain control units. That is not possible unless you have purchased a valid license. With that said there may be some basic coding and programming of control units that can be done but this programing can also be performed with other advanced scanners.

Mercedes Star Diagnostic Problems with Software (Xentry) VM Ware Installation: All the setups that you see for sale that state that they use VMware environments are not legitimate hardware and software. Besides the fact that these scanners are not legal copies, they are also prone to crashing and run much slower than direct Windows installations. Yes, you are required to have a Windows XP with a serial port for the MB Star Diag C3 scanner. Many VMWare Mercedes Star Setups experience problems some of which you can see posted on this site: MB SD C4 C3 problems and solutions.

License: In order to get the full features offered by Mercedes Star diagnostic scanner you need to sigh up for a yearly subscription and pay a license fee. This is not financially feasible if you only work on one or two Mercedes-Benz models. If you end up buying a cloned version of the scanner the Xentry software key will expire in a few years and you will not be able to use your scanner at all.

How to pick out a decent SD Connect C5 for Mitsubishi Fuso

Appear right here: How to pick out a decent SD Connect C5 for Mitsubishi Fuso diagnostics

sd-connect-c5-1

FYI, each MB Star SD Connect C5 application share the same main interface when you login.

But the car coverage is different for use. For standard MB SD connect C5, you might have luck with Mercedes and Sensible only!

sd-connect-c5

MB SD Connect C4 requires to update VCI

We have a customer whose MB SD Connect C4 diagnostic system runs great but suddenly require an VCI upgrade.

He rename the VCI update file, but still failed to run Star diagnostic self test (Error screenshot attached)

12-1 12-2 12-3

Solution:

Re-install mb sd c4 battery, update MB SD C4 firmware to V2.3.2.

Some users feedback that SDConnect from OBD2TOOL with serial number 101044 will take firmware update risk. If you use our DAS software without internet connection, it will work.

SDconnect C4 DTS-monaco user manual

MB SD Connect C4 DTS-monaco user manual:

1.What is DTS-monaco?
2.Which MB sw version comes with DTS-monaco?
3.Why do you need DTS-monaco?
4.What’s the difference between DTS-monaco and Vediamo?
5.Where to get DTS-monaco confirmed to work?
6.Where to download DTS Monaco for free?
7.How to install DTS Monaco on Windows 7?
8.Any good success with DTS Monaco?
9.How do people think of DTS Monaco?

1.What is DTS-monaco?

DTS Monaco enables the comprehensive testing of diagnostic communication, diagnostic data and diagnostic sequences in the areas of engineering, testing and preparation of manufacturing tests. It can be adapted flexibly both for a whole range of different test tasks and for different user groups.

2.Which MB sw version comes with DTS-monaco?

12-2017, 03-2018, 05-2018 (newest)

7-1

3.Why do you need DTS-monaco?

1)Areas of Application
* Development of diagnostic and control functions for ECUs
* Function test and validation
* Integration and system test
* Preparation of test sequences for Manufacturing and Service
* Analysis of returns and Quality Assurance

2)Flexibly Adaptable to the Relevant Task

DTS Monaco is part of the Diagnostic Tool MB Star C4 Set product family and is based on the DTS Base System. Monaco stands for Modular Analyzer for Vehicle Communication. A clearly laid out start page enables simple and fast access to the functions required most frequently. The actual workspace is divided into two: one area with a fixed layout and one with layouts that you can toggle between. A status display below shows communication server messages. The various functions are realized using special, configurable interface elements. These “HMI Controls” can be arranged freely in the layouts in configuration mode and comprehensively configured.

3)Early Detection of Problems and Errors

In execution mode, a configured workspace can be “started”. In doing so individual functions can be started automatically and communication can be established in advance if so required. Self-generated test sequences enable both simple and very complex function tests. This makes it possible to detect, and remedy, communication problems and function errors at an early stage. Communication data and test results can be documented in entirety in the process.

4)Fast Results

For typical use scenarios predefined templates including an universal database for the OBD self-diagnosis as well as various protocol templates (WWH-OBD, J1939-73 among others) are supplied. In Demonstration mode, all functions can be tested, even without an interface and a license, using a detailed example including simulation. Furthermore, the tool has a completely integrated OTX runtime for running complex test sequences in accordance with ISO 13209. An authoring tool for creating such OTX sequences can be started directly from SD Connect C4 DTS Monaco.

4.What’s the difference between DTS-monaco and Vediamo?

7-2

DTS-monaco vs. Vediamo

7-3

DTS-monaco wins, definitely!

5.Where to download Star Diagnostic DTS Monaco for free?

https://mega.nz/#!p9ZDGKwS!VTn9fB80Z9-YKpV8aj9PkRXR3KinAT6RFiW13GGdOHI It’s free but with unknown security.

6.Where to get DTS-monaco confirmed to work?

7-4
7-5
7-6

Here you go.

http://www.obd2tool.com/category-163-b0-MB+Star+Diagnostic+Tools.html

7.How to install DTS Monaco on Windows 7?

When installing DTS Monaco to communicates and works with SD connect c4 all user installed SDconnect Toolkit version 2.1.3. And no one tried to force the work SDconnect Toolkit version 2.1.4.2, which is installed together with the installation of Setup_Addon_DAG. And I did it.

Checked only on the system without DAS/Xentry.

DTS Monaco 8.03.12.

Windows 7 x64.

Follow the next steps:

1)  Install Monaco
2)  Install Setup_Addon_DAG
3)  Go to С:\ProgramData\I+ME ACTIA\Toolkit\
4)  Open and edit toolkit.ini

Code:

ShowInTray=2
NetworkIcon=2
DeviceIcon=1
ConnectionState=1

1)  Save file and reboot Windows
2)  Connect SDconnect MUX via cable
3)  Start System Configurator
4)  Go to Licenses and you will see your MUX as DCDIPartW with your serial number. After editing in Interfaces type of MUX will change to MVCI_IME_ACTIA_GmbH_SDconnect
5)  Go toInterfaces

Code:5

eCOM_SMR
Interface name – > SDconnect_SMR
Bus system interface – > D-PDU API
D-PDU API version – > I+ME ACTIA GmbHXS_D_PDU_API_FOR_DTS_8_03_12
Module type – > MVCI_IME_ACTIA_GmbH_SDconnect
Cable – > CABLE_OBDII_SDCONNECT
Physical links: CAN1, CAN4, CAN8

1)  Click Save and close System Configurator
2)  Now you can connectto the car or single ECU

8.Any good success with DTS Monaco?

DTS Monaco works good – Mercedes W205 coding
Mercedes-benz W205 coding with DTS Monaco