Fgtech V54 FAQ For Installed Work and Use

Fgtech-V54-1

Customer have some question about our Fgtech V54 Galletto 4 Master (click here) before place an order and after-sales for Fgtech V54 functions, Fgtech software and Fgtech installations. Below Autonumen select and sort these question for customer reference.

About software:
Q: I have got my package, but the CD is broken, where and how can i get the software?
A: Sorry, you need to buy new FgTech ECU programmer.

Q: After I install the software, it ask me to update it, can I update it?
A: No, update the Auto ECU Programmer Galletto V54 software will damage the device.

Q: FGTech Galletto 4 can cancel EGR gestation via OBD?
A: Sorry, at present it still can not do this function, it just can read and write the Data of Engine ECU

Q: Can Fgtech V54 do this ecu Bosch EDC16 BMW(P3)?
A: Yes, it can do.

Q:Can your v54 master really can do boot mode tricore?
A:Yes,it can do,but depends on your ecu ,sir,we have tested on VW,it can do

About function:

Q: FGTech Galletto 4 can cancel EGR gestation via OBD?

A: Sorry, at present it still can not do this function, it just can read and write the Data of Engine ECU

Q: Can Fgtech V54 do this ecu Bosch EDC16 BMW(P3)?
A: Yes, it can do.

Q:Can your v54 master really can do boot mode tricore?
A:Yes,it can do,but depends on your ecu ,sir,we have tested on VW,it can do

Q: Hello I wanted to know if it can work with the truck to 24v or needs transformer
A: Sorry, Galletto V54 cannot support 24V truck model.

Q: Hello new V54 FGtech Galletto 4 support NEW JTAG Renesas?
A: It can support new chip JTAG, but can not support all of these ecu chips. Please kindly note.

Q: Hello, does FG-tech V54 can support Peugeot 308Turbo?

A: Whether it work on your car, that’s mainly depends on the ecu model, please check fgtech v54 ecu passing list here:

Q: Does FGTech Galletto Support Siemens Sid 208 OBD or Tricore?

A: FGTech Galletto supports Tricore function.

Q:Can FGTech Galletto work in Continental SID 208?
A: Sorry, it cannot.

Q: Can fgtech v54 supports checksum function?
A: Yes, fgtech v54 can checksum automatically after it read out the data.

Q: Will fgtech galletto 4 V54 master work on 2007 Dodge Caravan J1850 protocol?
A: Yes, you can try it.

Q: Fg tech v54 can read and write the edc17c9 Opel fiat?
A: Sorry, it cannot.

Q: For MED 17,which one is better, KESS V2 or this one?
A: KESS V2 is better.

Q: Install well,test well,just wonder why it cannot do 2013 or 2014 years car
A: This version just can do 2013 around, cannot do very new car

Kess V2 5.017 All Versions Review Works very wel

So far, i have all versions of Kess v2 firmware 5.017, incl three types of GREEN pcb version and one RED pcb version.

See what i have now…

Kess 5.017 with green pcb

27-1

The first i have (online version master clone)


The second



The third one



The PCBs are kind of different, saying they’re from various Chinese factory.

Also, the methods of token reset are not the same. With the third one, I can rest tokens myself with a button inside for that.

Besides, there is no much difference. I have tested many times. I’m using Windows XP.

Already done 30+ cars using this tools. Works very well.

Did a edc16 + c35 according to the line made without question.

Works, edc17c54 vw crafter record of the hole.

Read and write Ford focus 1.8 and Mazda 6 2.0, all ok.

In summary,

Order came quickly from Obd2tool.com. All kess v2 master clone works. connected to the car, read data very fast. Works fine. I’m satisfied.

EDIT:

Today, i received the latest KESS V2 v5.017 online version EU solution. Fast delivery. With a red board.

Look here:




Have read & written a 2007 BMW 323i 2500 24v N52B25, ECU: siemens msv80. good






















All versions i have work good. Items at obd2tool.com with relief.

Add thanks if i help you.

What ktag V2.11 FW V6.070 can do more

KTAG v2.11 FW:6.070 is available in Obd2tool.com, engineer verified its working perfect like original one.

17-1

17-2
What Car ECU Programmer Ktag V2.11 FW:6.070 can do more?

1.Add a renew button which help users away from the worries of hardware be locked using 30 times, you only need press the button to renew by yourself.

2.Works on new BMW F series!

17-3 17-4

3.KTAG V7.020 works on more ECU types I.E Bosch EDC 16/ EDC17/ MED17,  DCM 3.7, Denso ECU type, etc.

17-5 17-6 17-7 17-8 17-9 17-10 17-11 17-12 17-13 17-14

KTAG FW 7.020 V2.23 WIN XP installation + token reset Q&A

Here you will know how to install ktag v2.23 software for KTAG Firmware 7.020 on Windows XP and KTAG token reset Q&A.

You have two choices to get KTAG FW 7.020:

KTAG V2.23 FW 7.020 Masterwith token renew button

22-1

KTAG FW 7.020ksuite V2.23 with token renew button

22-2

Any difference? Same function?

Yes, these two kinds of KTAG FW 7.020 has SAME function and SAME unlimited tokens.

The ONLY Difference is the appearance.

KTAG FW 7.020 PCB

22-3 22-4
KTAG Token Reset Tips with Token Renew Button

KTAG with token renew button. When tokens are used up, just connect it with computer and the red indicator flash, then you press the Token Reset button, wait until the indicator flash off, unplug the USB cable.

Connect KTAG with computer again, now you get 30 tokens.

How to install KTAG FW 7.020 Ksuite V2.23 on WIN XP step by step?
Before install, please disconnect the internet connection.

Unzip KTAG Ksuite 2.23 software then run Ksuite 2.23 setup.exe.

You will see a “License Agreement”.

Choose “I accept” and click “Next”, click “install”.

22-5

22-6
During Ksuite 2.23 installing process, you will see “Microsoft Visual C++ 2005” agreement.

Click “Yes” to accept all items and go on.
22-7
After that, you can see ECU Programming Tool KTAG Ksuite 2.23 software information:

Improved checksum error for family 532 (FIAT MARELLI MM8GMK SPC564A80 CAN)

Added new file type for family 535 (MAZDA DIESEL DENSO RENESAS SH725X MY2015 CAN)

Added new file type for family 537 (FENDT/ JCB/ VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN)

22-8
Click “Next” then “Finish”. (Remember to check the box “Install USB drivers”)

22-9

Next you are going to install KTAG Ksuite 2.23 USB Driver.

Select language “U.S English”, click “OK” to install.

Click “Next” until you can click “Finish”.

Ksuite 2.23 USB Driver installation OK.
22-10

22-11

Now you successfully install Ksuite V2.23 software at obd2tool.com!

Click the K-suite 2.23 shortcut on desktop start to use KTAG Firmware 7.020!

22-12

22-13

Ktag K-TAG FW V6.070 Tips for ECU Tuning Beginners

Here are Frequently Asked Questions about  ECU Programming Tool V2.13 FW V6.070 KTAG Master Version posted by users in the forum. Hope these can help you solve problems.

Frequently Asked Questions when choosing K-tag

Q1: Dose K-tag work with truck?

A1: Yes, it does. Uobdii offers KESS V2 truck Version (SE87-CK)

Q2: What difference between KTAG V7.020 and Kess V2 Online Version?

A2: I don’t see the point of the question, maybe you can post a more pertinent question. KESS is for OBD and tricore, K-tag is for BDM it’s as simple as that, you will need both.

Q3: Hi guys, I’m just looking to buy another interface and was wondering if the Galleto is any good compared to the Alientech interface? I already have KESS.

A3: My feeling is that K-tag has the best support and manuals and a large list of supported cars. Furthermore, I’m fully advising you to get a Alientech K-tag as you already have KESS V2, just for easiness of using same software.

Q4: I was investigating and I understood that KESS is only for OBD2 connections and unable to work over the main board directly in the flash memory.

A4: K-tag is a complement of KESS v2. If KESS v2 can’t read, K-tag do!

Frequently Asked Questions when using K-tag

Q1: Can somebody tell me why K-tag doesn’t work when I match the computer to the net?

A1: Hi! This is a simple question. Do not connect your computer to internet when you use this device. Notice that do not update the device and close anti-virus software when you use the software, or it may out of work at obd2tool.com.

Q2: What can I do when K-tag tokens used up, should I pay for it?

A2: This device when you used up tokens, you can use the manual provided to add new tokens to it for free, so it is called V2.13 KTAG version with unlimited tokens.

Q3: I have a problem with my K-tag. When i tried to write a file K-tag shows me this: aggiornamento obbligatorio entro le prossime 7 programmazioni. collegare lo strumento a internet ed eseguire l aggiornamento allena possible. Ktag warning that never connect to internet for updates. I don’t want to lock. What can i do?

A3: Hi, to solve the problem you need to reset the software and try it again.

Q4: Someone have read and write a ECU (EDC17 CP42) with K-tag, does it better to do with K-Tag?

A4: V2.13 K-tag support BDM function well.

Q5: I had a problem with my ECU, the car won’t start, then a friend of mine flashed my ECU with an original file Fiat Punto 1.3 Mjet (1064P348) and the car started but the fan was always working. I try to find another original file and I found it and I flash it with MPPS, and the car won’t start. And now I can’t access ECU, maybe it’s locked. Please help me, thanks a lot.

A5: Hi, if you want to read and write ECU, you can try the V2.13 FW V6.070 KTAG Master Version, and if you want to modify ignition maps, you need to use them with ECM TITANIUM V1.61.

Q6: Although Alientech have listed the protocol in their 2.13 update (BOSCH EDC17 C79 IROM TC1797 TPROT JEEP), but I can’t get it to read with K-tag.

A6: Check the cable if you are switching switch correctly.

Q7: How to connect K-tag to the computer, do you have any manual or diagram?

A7: Yes, the pictures shown below.

14-1

14-2

Ktag v7.020 read 2013 Opel Insignia EDC17C59

This is how to use KTM100 KTAG version ecu programming tool to read EDC17C59 ECU from 2013 Opel Insignia, including EDC17C59 and ktag ksuite cable connection/pinouts.

Here you go.
Ktag fw 7.020 clone is working with EDC17C59 ECU
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-1.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-2.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-3.jpg

Select the model
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-5.jpg

Ktag v7.020 master clone warnings, notice, recommendation, instructions
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-7.jpg

EDC17C59 connection instructions
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-8.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-9.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-10.jpg

Direct connection
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-13.jpg

EDC17C59 and cable pinouts
Pin 5, 46 — red— +12v
Pin 2 — black — ground
Pin 66 — white — CAN-H
Pin 65 — green — CAN-L
Wire soldered to the two pins —- gray with alligator clip — BOOT
Soldered wired — blue with alligator clip — CAF1
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-14.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-15.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-16.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-17.jpg

Select the plug-in you need
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-18.jpg

Ktag firmware 7.020 is reading EDC17C5919
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-20.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-21.jpg

car diagnostic scanner EDC17C59 ECU reading successfully
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-23.jpg

Save data
Done!