Quickly 4C 4D 46 48 clone machine first user’s Feedback

With the release of Quickly 4C 4D 46 48 clone machine, locksmith has one more choice on 4C 4D 46 48 clone machine, besides ND900, CN900, CBAY for 4D 46 48, clone king and TM100+ TM100 4D and ID46 adapter. FYI, it’s a factory in China with Chinese version only for a long time, now English version. (Not a clone of cn900 Tjecu)

Since Quickly 4C 4D 46 48 clone machine sale at half the price than CN900, several customers ordered.

Here is the first customer who is a senior locksmith from Colombo, and repeated customer at UOBD2.net. He order one Quickly 4C 4D 46 48 clone machine at 8th June, 2015, and he give us feedback

8th June, 2015 update:

Ordered this device today, will review and post feedback

http://www.uobd2.net/wholesale/quickly-auto-key-programmer.html

18th June, 2015 Update

I received my Quickly car key reader today. It’s a big case for everything including batteries and charger, warranty card, instruction for use, tips, supported chip list.

I confirm Quickly car key reader can read Toyota SK H and H key.

Quickly car key reader is battery powered and cheaper anything else to buy over the CN900, apart from this, all functions are same as cn900 and I feel that it is of better built quality.

I can confirm Quickly car key reader need 46 decoder, fit also to the new 46 cloner

http://www.obd2tool.com/goods-5039-Quickly+4C4D4648+Code+Reader+Chip+Transponder+Auto+Key+Programmer.html

quickly-auto-key-programmer-for-toyota-h-key-06

This locksmith brother haven’t test the unit with cn1,2,3, but he says he is sure cn1 and 2 will be stable, going to test cn3, and test more, then post update.

ELM327 OBD code reader vs. ELM327 Vgate scan

Bluetooth/WIFI ELM327 OBD2 scanner and Vgate ELM327 scan tool, which one is better to choose for DIYers? Check comparison below:

Similarities:

1) Both designed with standard 16-pin diagnostic connectors.

2) Both ELM 327 and Vgate scanner share the same hardware version V1.5 and software version V21.

3) Both perform similar functions:

Engine RPM
Load
Coolant Temperature
Fuel Status
Vehicle speed
Intake Manifold pressure (MAF/MAP)
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltage /short term fuel trim
Fuel Pressure

Differences:

Bluetooth/WIFI ELM327 code reader, any good?
Bluetooth ELM327 OBD2 code reader for Android
EML327 scanner bluetooth
ELM327 WIFI Interface
ELM327 scanner wifi

ELM327 code scanner support protocols:

All OBDII protocols
ISO 9141
ISO 11898(aka. CAN)
ISO 14230(aka. KWP2000)
ISO 15765(aka. CAN)

Compatible vehicles:
Benz 2001/02/03 W203 C200K (ISO)
BMW X5 2002 (ISO) Chevrolet Aveo (ISO)
Citroen C3 2004 (ISO)  Daihatsu YRV 2005 (ISO)
Daihatsu YRV Turbo 2006 (ISO)
Fiat Tipo 2002 (ISO)
Ford New Focus 2006(CAN)
Honda Accord 2006 JDM (ISO)
Honda Accord Euro R 2004 JDM (ISO)
Honda City GD8 (ISO)
Honda Civic ES 1.6A (ISO)
Honda Integra Type R DC5 JDM (ISO)
Honda Jazz 1.4M (ISO)
Hyundai Accent 2004 (ISO)
Hyundai Getz 1.3A 2004 (ISO)
Hyundai Getz 1.6M 2004 (ISO)
Hyundai Matrix 2004 (ISO)
Hyundai Santa Fe 2.4A (ISO)
Hyundai Sonata GLS (ISO)
Hyundai Sonata 2005 (ISO)
Hyundai Tuscani FX (ISO)
Kia Carens 2005 (ISO)
Kia Magentis 2005 (ISO)
Kia Rio LS (ISO)
Kia Sorento SUV 2005 (ISO)
Lexus es300 Mazda 2 (CAN)
Mazda 5 (CAN)
Mazda 6 (CAN)
Mazda Premacy 2001 (ISO)
Mazda RX8 (CAN)
Mitsubishi Colt 2003 (ISO)
Mitsubishi Colt Plus 2005 (ISO)
Mitsubishi Eclipse(GST—–Turbo Car can be tested for the year 1995-2000; RS/GS—-1994-1996 GS all can do; Turbo Car for the year 1996-2000,only have speed and TPS, can clear the DTCS)
Mitsubishi Lancer Evolution IX 2006 (ISO)
Mitsubishi Pajero 3.5 V6 2006 (ISO)
Nissan Sunny B14 (ISO)
Nissan Sunny VIP FB15 (ISO)
Nissan X-Trail 2.0L 2004 (ISO)
Nissan X-Trail 2.5L 2004 (ISO)
Peugeot 206 2001 –Only can show RPM
Peugeot 206 (ISO)
Peugeot 307 (ISO)
Peugeot 407 (ISO)
Renault Megane II 2005 (ISO)
Renault Kangoo 2006 (ISO)
Subaru Impreza 1.6TS 2002 (ISO)
Subaru Impreza WRX 2005 (ISO)
Toyota Camry 2.0A 2004 (ISO)
Toyota Camry 2.4A 2005 (ISO)
Toyota Corolla Altis 1.6A 2005 (ISO)
Toyota Corolla GLXi G8 1999 (ISO)
Toyota Corolla G9 2002 (ISO)
Toyota Vios 2004 (ISO)

Vgate ELM327 scanner, any good?

1) Vgate scan has less vehicle limitation, but ELM327 Bluetooth/WIFI works limited car models.
2) Vgate supports some EOBD car makes, while ELM327 mainly deal with OBDII vehicles.
3) Vgate multiscan performs faster and more reliable

Bluetooth Vgate scan for Andriod/PC
Vgate Scanner bluetooth
WIFI Vgate scan OBD multi-scan for iOS system
ELM327 Vgate WIFI
Vgate Multi-scan

Support OBDII/EOBD2 protocols:
ISO 15765-4 (CAN-B 125Kbps, started since 2003 in USA)
ISO 15765-4 (CAN-C 500Kbs, 11bit ID, 29bit ID, started since 2003 in USA)
ISO 14230-4 (KWP2000)
ISO 9141-2 (5 baud init. 10.4 kbaud, replaced by 14230-4 gradually, stopped in USA in 2008)
SAE J1850 VPW (10.4 kbaud, replaced by 14230-4 gradually, stopped in USA in 2008)
SAE J1850 PWM (41.6 kbaud, replaced by 14230-4 gradually, stopped in USA in 2008)
SAE J1939 the Data link connector standard

PC windows (supports RS232/USB/bluetooth):
Auto Enginuity ScanTool 6.02 for PC in English/German/Hungarian/Spanish
Dashcommand by Palm Performance, Win 95/98/ME/2000/XP/Vista/7, support touch pad.
Digimoto 5.01.22
Easy OBDII 3.0.0
EVOSCAN for Mitsubishi 1994~2009, Mitsubishi EVOX 2008~2010, Subaru SSMII 1997~2007
FiatECUScan for Alfa/Fiat/Lancia, Win XP/Vista/7
GM mode 22 scan tool by Terry
moDiag Professional in English/German/Hungarian/Romanian, Win 2000/XP/Vista/7
MultiECUScan
OBD 2007 PID reader for PC and pocket PC by GLM Software
OBD Logger Windows & Unix by Jonathan Senkerik
OBDScan for GM Ford Chrysler Mazda. Win 2000/XP/Vista/7
OBD-II ScanMaster 3.52 in English/German/Russian by Wladimir Gurskij
OBD-II ScanMaster Pro
OBD2 Scantool by Ivan Andrewjeski
OBDII for ELM322 by David Huffman
OBDWiz
PCMSCAN for Windows 95/98/ME/NT/2K/XP/Vista/Win7
ProScan for Win 98/98SE/ME/2000/XP/Vista, NT4.0 SP6A.
pyOBD by Donour Sizemore for MacOSX and Linux
RDDTC Simple Trouble Code Reader by Pete Calinski
Real Scan by Brent Harris, Simple Read & Reset software for older PC.
ScanTest by Ivan Ganev aka a-ser for Pocket PC
ScanMaster-ELM 2.1, Win 98/ME/2000/XP/7, USB/Bluetooth/WLAN, OPEL 1996~2004, Alfa Romeo 1998~2001, Fiat Bravo 1998~2002
ScanXL ELM (1996~2008 Ford, Lincolin, Mercury)
ScanXL PRO, Win 95/98/ME/NT/2K/XP/Vista/7
TouchScan for Win2000SP4, XP SP2, Vista 32/64, 7 32/64, serial/USB/Bluetooth/WiFi/touch screen, EOBD/JOBD, ?90?PID, Nissan
Vauxcheck by Gendan, Vauxhall/Opel 1997~2008 petrol/diesel (2004~2008 CAN bus), Renault Vivaro/Movano, Vectra C diesel 2002~2003
VitalScan 1.3 for Win, Win Mobile, Palm, Win smartphone
WGIobdII
WOBD by WDT
Palm/Pocket PC (Supports RS232/USB/Bluetooth):
AutoEnginuity for Win PPC 2002/2003 v4.2, mobile 2003SE/2005 v4.4
AutoEnginuity for Palm 3.5+
EVOScanPPC for Mitsubishi 1994~2009 /Subaru,Win CE 4.2/5.0/6.0, Pocket PC 2002/2003, Win Mobile 5/6/7
OBD Gauge for PalmOS & Pocket PC by Dana Peters
ScanMaster-PPC for Pocket PC, Win Mobile
Nokia Symbian : (supports bluetooth)
AutoMobile (Blackberry, LG, Nokia, Motorola, Samsung, Sony Ericsson)
OBDScope (free trial and paid EUR9.95)
Nokia N800 & N810 internet tablet (supports bluetooth)
Carman
Android: (supports bluetooth)
alOBD scanner
DashCommand 2.9.1 by Palmer Performance
Torque by Ian Hawkins, Android 1.5/1.6/2.0/2.1

http://www.obd2tool.com/category-43-b0-ELM+Family+Tools.html

Newest firmware V1.59 Op-com USB interface released

Op-com USB interface new firmware 1.59 (V5) for Opel and Vauxhall diagnosis new adds features:

1) It connects to the car during 2013-2014.
2) Fixed bug
3) It works much better, faster without jamming or logout.

Op com diagnostic software: 08/2010 (2010V)
Firmware: opcom V1.59
Opcom 1.59 firmware PCB with PIC18F458

NOTE:
Any DIY firmware update is invalid on our OP-COM cables. You need to purchase new Opcom 1.59 interface (Item No: SP205 only).
But the Op-com 2010V software can be downloaded free here:
2010V op com software supports English only. If you need German version, then choose opcom 2009V.

Operating system: Win XP only

Software video installation guide:
How to install op-com 2010V Hardware V1.59 CAN OBD2 for Opel

Customer feedback/review:
1) Opcom V1.60 is known to be buggy for Vectra-C so better to use v1.59 anyway
2) Op-com V1.59, Vectra C tested and its working like a charm
3) opcom v5 (1.59) hardware is the best cable. China clone V5 the one with real PIC18F458 works with 08/2010 china.
4) 150-200 Euros for an EU clone which is a disgrace (they neither made the original software, nor hardware, nor license hack, they just pick up the profit by selling for ridiculous amount somebody else’s work). I would rather to spend 20 bucks worth v5 from China. It works.

PS:
Opcom Vehicle model reference:
Agila-A (2003-2007), Agila-B (2007 – or later)
Ampera (2011 – or later)
Antara (2007- and newer)
Astra-F (1992-2002), Astra-G (1998 -2009), Astra-H (2004-2009), Astra-J (2010 – and later)
Calibra (1990-1997)
Cambo (2001-2003)
Captiva (2009 – or later), Captiva MAXX (2009 – and later)
C-Combo (2001-2009)
Corsa-B (1994-2003), Corsa-C (2001-2009), Corsa-D (2009 – or later)
Insignia (2008 – or later)
Frontera (1996-1999), Frontera -B (1999-2004)
GT (2007 – or later)
Meriva (2002-2010), Meriva-B (2010 – or later)
Mokka (2012 – or later)
Monterey (1997-1999)
Movano (1999-2009)
Omega -A (1990-1993), Omega-B (1994-2003)
Signum (2003-200 Sintra (1997-1999) Speedster / VX220 (2001-2009) Tigra (1995-2000), Tigra-B (2005-2009) A-Vectra (1992-1995), Vectra-B (1996-2002), Vectra-C / Signum (2002-2009) Vivaro (2001-2009) Zafira (1999-2005), Zafira-B (2006-2010), Zafira Tourer C (2011 – or later) SAAB 9-3, SAAB 9-5

This is the opel old vehicle models list, the new models are added in this opel diagnostic tool.

How to Update ICOM( ICOM A1/ICOM A2) to firmware to V1.38

Hi dear friend, how’s your weekend ? Today we’d like to share with you

How to Update ICOM A1 /ICOM A2 to firmware to V1.38

The new veresion icom need use the new Firmware to do .

BMW Perfect version ICOM/ICOM A2/ICOM A1 software has upgrade to V2015.07, (v2015.8 working on WIN7 also available now) the new version ICOM ISTA-D ISTA-P has to work with super version BWM ICOM A2+B+C wifiwith firmware 1.38.01. Follow the instruction below to update Super ICOM A2 firmware to V1.38.01.

BMW ICOM A2 With WIFI diagnostic system shares the same firmware update instructions, the only difference is the login IP.
Ordinary ICOM A2 login IP: http://169.254.92.38:60080/

Super ICOM Software Version: V2015.7
ISTA-D: 3.49.30
ISTA-P: 3.55.4.000
VIN: 2015.05

ICOM Hardware/Firmware Requirement:

Super version BWM ICOM A2 with firmware 1.38.01 1.24.00

icom-update-1

 

How to Update ICOM A2/ICOM A1 Firmware to V1.38.01?

Update video checking : https://www.youtube.com/watch?v=yg1BhA_J9Qk

Please connect Super version BMW ICOM A2 with computer using Network cable and feed super ICOM A2 using 12V power adapter or connect ICOM A2 with BMW vehicle.

1) Unzip ICOM A1/ICOM A2 V1.38 firmware update tool on the desktop
2) Open the unzipped folder and read the instruction on Notepad first
3) Open IE Internet Explorer, Browse to http://169.254.33.45:60080/, login with user name/password: root/NZY1150263

icom-update-2

4) Click on “Update Firmware“, you will able to see the ICOM firmware information

5) Select “ICOM-BootImage-01-24-00.bin” file, set the image type to “SYSTEM”, click “Send the file”

icom-update-3

6) When the system pops up “Write the image file to the flash?”, click Yes, then the ICOM red indicator will flash

icom-update-4

7) Then the system will display “The SYSTEM IMAGE update was successfully”, click “update firmware“,

8) Select “ICOM-ApplicationImage-03-38-01.bin” file, set the Image type to “APPLICATION“, click on “Send the file

icom-update-5

 

9) When the system pops up “Write the image file to the flash?”, click Yes, then the ICOM red indicator will flash again

10) When finishing updating, click “reboot

icom-update-6

Please Kindly notice when you do update :

1. Setting up your computer to obtain an IP address automatically

2. Firstly choose the smaller file “ICOM-BootImage-01-13-00.bin” , then set image type to SYSTEM;

3. Secondly choose the bigger file “ICOM-ApplicationImage-01-18-00.bin”, then set image type to APPLICATION.

That’s all for the update steps, have you got it ?

Warmly welcome to www.obd2tool.com

What does NitroOBD2 Diesel Chip Tuning Box do?

Nitro OBD2 Diesel Chip Tuning Box Plug and Drive NitroOBD2 Power Fuel Optimization Device can makes new map in the car’s computer ECU to increase the performance of your car,finds out the hidden power of your car,up to 35% more power and 25 % more torque.

14399797383 What does NitroOBD2 Diesel Chip Tuning Box do?

Plug and Drive NitroOBD2 Performance Chip Tuning Box for Diesel Cars works based OBD2 protocols as remaping the Car’s computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car, according to the drivers’ habits and always keeps remaping the ECU to increase the performance of engine.

 

What is NitroOBD2 Chip Tuning Box?

NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
When it plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU, NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
NitroOBD2 does not change any of the settings permanently. To turn back to the car’s original settings, just unplug NitroOBD2 from OBD2 connector.

What does NitroOBD2 do?

Nitro OBD2 Diesel Chip Tuning Box can according to your driving habits, makes new map in the car’s computer ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle’s power and torque increasing.

Disable Porsche 987 DRLs with PIWIS tester 2 scanner

This is a Porsche Boxier (987) Cayman came from Canada originally. So, it has daytime running lights/DRLs (meaning — they stay on all the time unless you turn the car off).
Porsche Piwis Tester II
Porsche Piwis Tester II

But the DRLs are in some other countries/regions. Then how to disable daytime running lights (DRLs).

They can be turned on and off by hooking it up by the Porsche dealer diagnostic system: Porsche PIWIS Tester II. You do not need to remove and check any fuses/connectors.

Connect Porsche tester 2 system with vehicle and run PIWIS software V12.400 (the current is the newest v15.600).
Porsche Piwis Tester II
Come to “Control unit selection” program. Select “Front” control unit. Press F12 to continue.
Porsche Piwis Tester II
Click “Coding/adaptations” function tab, select “Front: Daytime Running Lights coding”, press F12 to continue
Porsche Piwis Tester II

Select “The width light” option and press F12
Porsche Piwis Tester II
Select side lights flashes synchronously options
Porsche Piwis Tester II
You will view the DRL status. Change the value from ON to OFF to disable the daytime running light.
Porsche Piwis Tester II
The DRLs have been disabled.
Porsche Piwis Tester II
Go back to Porsche PIWIS tester II scanner main menu to get the fault code cleared and then exit the piwis software program. Disconnect the Porsche tester.

How to use and update AUTOBOSS V30 Elite Super Scanner

 

Original autoboss elite v30 super scanner is an extremely easy-to-use and powerful OBD-II tool for repairing business, technicians and DIYers. Here is the quick AUTOBOSS V30 automotive diagnostic scan tool operation guide for beginners including update instructions.

Top 7 advantages of Autoboss v30 scanner:

  1. No computer needed
  2. No software installation
  3. With built-in printer
  4. Cover more than 57 makers, 40,000 vehicle systems
  5. Update online
  6. Many special test functions
  7. Navigation bar easy operation

First of all, check the package:

Autoboss v30 elite comes with SD card, USB cables, battery cable, main cable, connecters, user manual, V30 scanner main unit, printing cable etc.

autoboss-elite-V30-package-1

Universal built-in self mini printer allows to print out the diagnostics results (fault code information, data stream etc)

autoboss-elite-V30-printer-2

Simplify press on the power-on button to start up the device and wait a few seconds to load the system

MAIN MENU

Come to the main menu, each function tab can be easily glanced through the navigation bar

autoboss-elite-v30-main-menu-3

VERSION

Click “Version” Tab, you are allow to view the Autoboss V30 Elite scanner software version, hardware version and device S/N.

autoboss-elite-v30-version-4

SETTINGS

Click “Settings” Tab, you are allowed to change language, self-check, set time etc

NOTE: V30 scanner language:  English (Default), Spanish, French, Italian, German, Russian. English is default language, If you need other language, please provide Serial Number to open it.

autoboss-elite-v30-setting-5

USER MANUAL

Click “User Manual” option, the scanner will explain how to access each function, including device warning, change layout, built-in printer setup etc

autoboss-elite-v30-7autoboss-elite-v30-6

DIAGNOSTIC

Click “Diagnostic” Tab, you are able to diagnose cars according to vehicle makers. AUTOBOSS E30 OBD2 scanner covers 57 makes, 40,000 vehicle systems. V30 is not just read& clear DTCs, it goes far beyond and accesses the complete vehicle, including: drive line, chassis, body, and the networking/communication modules.

Asia vehicle makes coverage:

autoboss-elite-v30-9autoboss-elite-v30-8

America car model coverage:

autoboss-elite-v30-10

European vehicle makes coverage:

autoboss-elite-v30-11

autoboss-elite-v30-12

China vehicle makes support:

autoboss-elite-v30-13

SPECIAL TEST

Select “Special Test” function. Autoboss Elite V30 is able to do special test for some models Renault, Kia, Hyundai, Toyota, Nissan, Volvo, Mercedes Benz and Fiat. You are able to replace component, reset adaptation data, reset air filter learned value after replacement, activate fuel pump etc for these vehicle models.

autoboss-elite-v30-14autoboss-elite-v30-15

 

autoboss-elite-v30-16

Here is also quick operation demo video for reference.

UPDATE

AUTOBOSS V30 supports one year free update, after that you need to pay 279USD/year.

How to update AutoBoss V30 Elite diagnostic super scanner?

You need to buy Autoboss V30/V30 Elite Security Card for one Year online update Global Version to renew the software.

  1. Log on Autoboss Official Website
  2. Download and install update client software
  3. Run client software
  4. Click “Renewal Setting” button
  5. Scathe panel to get security code
  6. Input product serial number, card number, security code
  7. Click “OK” button to finish
  8. Successfully complete, the expiration date will be automatically extended according to the subscription length on the card.

G Decoder Cloner Box Read/Copy Use for CN900/ND900

G Decoder Cloner Box Read/Copy Use for CN900/ND900

g-decoder-cloner-box-for-nd900-key-programmer-1 toyota-g-chips-cloner-box-use-for-cn900-1
This G decoder cloner box must works together with CN900/ND900 key programmer.

SK123-B work with CN900 together, SK121-B work with ND900 together.
This cloner box is used to copy Toyota G chips.

What should you pay attention to when you use this G cloner box?
1) G cloner box  has the unique serial number for 4G cloner box.
2) When you update CN900/ND900 key programmer, input this serial number. Then this G cloner box will be activated for usage, and it will be bonded with this CN900/ND900 key programmer. It means one G cloner box only can work together with one CN900/ND900 key programmer.
3) G cloner box can use CN5 4G chips, CN5 Toyota G chip can replace the CN2 chips                                                                                                                                                           g-decoder-box
Where you can download the software:
Please go to official website to download the latest software and install.

http://www.obd2tool.com/goods-4478-CN900+46+Cloner+Box.html

Volvo 88890300 Vocom Interface Multi-languages truck diagnostic tool

Volvo 88890300 Vocom Interface for Volvo/Renault/UD/Mack Truck Diagnose Multi-languages,With the newly release of Volvo 88890300 (VCADS) in obd2works,Volvo Truck technician will have one more option to select the diagnostic scanner.what’s the function of the

Volvo 88890300 Vocom Interface??

Volvo 88890300 Vocom Interface Functions:

Identify a product.

View information history.

Diagnose a selected product.

Test a selected product.

Program a selected product.

Calibrate a selected product.

some customer would ask us is it support french/espanol/portugues ? my answer is yes.pls see the support language of Volvo

88890300 Vocom Interface

88890300 Vocom Interface is already recognized by some Volvo technicians because it’s good quality, the function and the price fit the technician needs.

Volvo 88890300 Vocom Interface update and OS:

Vocom update and OS depends on its two separated software: PTT1.12/2.40 and PTT2.03/3.02

1. Software version: PTT1.12/2.40, software come with package for free, this software must installed on Windows XP system computer. Support Multi-languages.

2. Software version: PTT2.03/3.02. This is latest software version. This software need additional purchase, price is 230usd. Support install on windows 7 professional or ultratme, support multi-languages.

To buy Volvo 88890300 Vocom Interface pls visit our shop:www.obd2tool.com

How to update original Autel MaxiDiag Elite MD802 scanner

Here is a step-by-step update instruction of original Autel MaxiDiag Elite MD802 4 system/full system diagnostic scan tool.

Autel MaxiDiag Elite MD802 4 system
Autel MaxiDiag Elite MD802 full system

This function allows you to update the scan tool software through a computer.

How to register Autel Elite MD802 scanner?

User would update the scan tool ONLY after you had registered the tool on our website: www.maxidas.com. Then you could download software, update online, retrieve information and get warranty service.

NOTE: Prior to registration, please confirm your network is working properly.

1. Log in Autel official website www.maxidas.com.
2. Click on the Update tool bar at the top of the screen, and then select User Register. Or click on the 3. Updates column in the lower right corner of the screen, and select Register.
4. The Register Information interface appears. Please read through the instructions, and click on Agree to continue.
5. Enter the Product SN (Serial Number) and Register Password, and click on Next.
Autel MaxiDiag Elite MD802 scanner
6. Follow the windows prompts to finish the registration.

NOTE: You can click “About” to check MD802 scanner information.

How to update Autel MD802 Diagnostic scan tool?

Autel frequently releases software updates that you can download. The Update feature makes it very easy to determine and get exactly what you need.

1. Install Autel PC Suit through the included CD, or download the applications in our website:  www.auteltech.com

2. Make sure that your computer is connected to the Internet.

3. Load the SD card of the scan tool to your PC.

4. Run the Autel MaxiDiag update option in Check-Elite PC Suit software. Wait for the Log In window to pop up.
Autel MaxiDiag Elite MD802 scanner
5. Enter the user name and password and wait for the Update window to display.  If you forget your password unintentionally, you may always click the [Forget your password?] to link to our website and find your password back.

In the Autel Elite MD802 Update window, select the items you want to install. Usually, you should install all available updates.

Generally, there are two ways to update Autel MaxiDiag Elite MD802 programs:

Batch updating:
Select the programs that you would update by clicking on the check boxes next to those items.  Then click the Update Selected Items button on the right side of screen.

Or, click on the SELECT ALL checkbox on the right side of screen and all updatable items will be selected automatically.

Then click the Update Selected Items button on the right side of screen.

Check the updating process by observing the upper left progress bar [downloading] and upper right progress bar [installing]. You may also find progress information in the Status column of updated items.

Anytime you could click the Pause button on the right side of screen to suspend all progresses, and the state of those suspended items would change to STOPPED.

To resume updating process, you may need to select those 63 suspended items again, then click the Update Selected Items button. The progress will resume from the break point.

When the downloading is completed, the downloaded programs will be installed automatically. The new version of Autel MD802 will replace the old version.

Single updating

Find the desired updating item and click the INSTALL button in the same line. With updating in progress, the INSTALL button changes to STOP.

Check the updating process by observing the upper left progress bar [downloading] and upper right progress bar [installing]. You may also find progress information in the Status column of updated items.

Anytime you could click the Pause button in the line to suspend this progress, and the state of this item would change to STOPPED.

To resume updating process, click the INSTALL button in the line again. The progress will resume from the break point.

When the downloading is completed, the downloaded program will be installed automatically. The new version of Elite MD802 will replace the old version.

NOTE:

Autel Maxidaig scanner support one year free update online, but after one year, you need to order Autel MD802 one year software online update service (130 USD).

Software Management

To view the list of installed programs or to delete an installed program, please follow these steps:
Click on the Installed Programs tag entry and the page will show the list of programs installed.  Select the program(s) that you would delete.
Batch delete: Select the programs that you would delete by clicking on the check boxes to the left of those items. Then click the DELETE button on the right side of screen.
Single delete: Click the UNINSTALL button in the line of your would-be-deleted program.

A window asking “Are you sure to delete the software?” will pop up for your confirmation.
Autel MaxiDiag Elite MD802 scanner
Click on Yes to delete the program(s) selected, or on No to cancel the action.
The deleted program will automatically add to the end of program list in the UPDATE page in case you would like to install again.

Theoretically, all programs in latest versions will be automatically compatible with the older versions, but if your scan tool do have a compatible problem and want to retrieve the older version for some programs, you may need to delete them first then install the older version again. Choose older version from the pull-down menu of program version.
Autel MaxiDiag Elite MD802 scanner

One year software online update service for Autel MD802:
http://www.obd2tool.com/search-MD802.html