Ktag v7.020 read 2013 Opel Insignia EDC17C59

This is how to use KTM100 KTAG version ecu programming tool to read EDC17C59 ECU from 2013 Opel Insignia, including EDC17C59 and ktag ksuite cable connection/pinouts.

Here you go.
Ktag fw 7.020 clone is working with EDC17C59 ECU
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-1.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-2.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-3.jpg

Select the model
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-5.jpg

Ktag v7.020 master clone warnings, notice, recommendation, instructions
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-7.jpg

EDC17C59 connection instructions
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-8.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-9.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-10.jpg

Direct connection
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-13.jpg

EDC17C59 and cable pinouts
Pin 5, 46 — red— +12v
Pin 2 — black — ground
Pin 66 — white — CAN-H
Pin 65 — green — CAN-L
Wire soldered to the two pins —- gray with alligator clip — BOOT
Soldered wired — blue with alligator clip — CAF1
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-14.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-15.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-16.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-17.jpg

Select the plug-in you need
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-18.jpg

Ktag firmware 7.020 is reading EDC17C5919
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-20.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-21.jpg

car diagnostic scanner EDC17C59 ECU reading successfully
http://forobd2tool.com/wp-content/uploads/2017/06/21/12-23.jpg

Save data
Done!