KESS V2 Clone Read and Write Delphi ECU MB Sprinter via OBD

May 11, 2021 Eva Auto ECU Programmer, Benz Trouble Repair 0

Here share a real customer test report about using KESS V2 Ksuite 2.23 fw V5.017 to read and write ECU data on a 2009 Mercedes- Benz Sprinter via OBD.

Car info:

Mercedes- Benz Sprinter 2009 (ECU: DELPHI DCM3.5)

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-1 (2)

Device used:

Kess V2 clone, SW Ksuite V2.23, FW V5.017 (EU version)

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-2 (2)

Main operation guide:

Connect KESS V2 programmer to the vehicle via the main OBD cable, and connect to computer via USB cable

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-3 (2)

Select the corresponding car model and click “OK” to continue

Select “CAN”–> “ID”

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-4 (2)

Step 1: Read file from ECU within 2 min

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-5 (2)

The original data is read out successfully, and then save the related file to computer.

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-6 (2)

Switch off the dash- board to continue

ECU reading is completed.

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-7 (2)

Disable DPF and write to ECU checksum correction performed by KESS software.

Step 2: DPF off file writing

Switch off the dashboard to continue

Switch on the dashboard to continue, check the connections and press “OK” to continue

Switch off the dashboard to continue

ECU writing is completed.

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-8 (2)

Finally, start the car normally.

KESS-V2-Clone-Read-and-Write-Delphi-ECU-MB-Sprinter-via-OBD-9 (2)

Related posts:

  1. How to use Kess 5.017 Ktag 7.020 for Land Rover read write
  2. Kess v2 & Galletto v54 Which is better for BMW M5 E60 EDC17 ?
  3. BMW e91 318d read write EDC17 c41 DDE8 error with KESS V2
  4. How satisfied are you with Kess V2 clone