Data logging is one of the amazing features of JLR SDD. Here is a step-by-step guide of using the Data Logger function in JLR Mangoose SDD diagnostic software for Jaguar and Land Rover.
Hardware optional: JLR Mangoose SDD, JLR mangoose pro, VXDIAG VCX NANO SDD
Operating system: Win XP/VMware
Connect mangoose pro cable /VXDIAG interface with vehicle via OBD socket
Run JLR SDD software on the desktop
Click “Auto Read VIN”
The system will display vehicle information after well communication is built
Click “Diagnosis” function
Symptom Selection and click “Continue”
Click “Recommendations” tab
Locate Complete vehicle – Datalogger. Click “Run”.
Select “Other signals”>> “Steering system” >> “Control Module Supply voltage”
Select “Battery voltage”
Select “Lighting status – Puddle lamp”
Select “Mirrors motor outputs – Mirror heat output”
Click 
icon and than click “Play” icon, you will be able to see the data stream
Turn ignition switch to ON and press tick to continue
PCM and SASM
Select 1st top right icon marked red circle
Select “Exit”. Press tick to exit
