How to do VWAudi Component Protection with ODIS software

VAS6154 ODIS Component Protection User Manual:

What is Component Protection:

Component protection is VWAG’s (VW, Audi, Seat, Skoda, Bentley, Lamborghini) way of eliminating vehicle or component theft by keeping track of each individual component and which vehicle it’s assigned too from the assembly line.

Why do you need to do component protection:

When a component protected module is fitted to its non-original vehicle, many, if not all of its functions will be limited. This is to try and prevent the use of stolen parts in the second-hand market. If a VWAG vehicle is reported stolen, a flag will be raised with their database for the vehicle’s VIN and the internal serial number/coding of each module fitted to said vehicle, such as an Engine or transmission ECU, Infotainment/Radio unit or AC/Heater control panel) making it impossible for these parts to be used on another vehicle. This will raise an error within our diagnosis system (connected to VWAG’s servers) when trying to remove the component protection and not allow the technician to proceed, alerting VWAG to the use of stolen parts.

Component protection also applies to any brand-new parts purchased and fitted. It would need to be removed before the technician could proceed with and coding, adaptions, or basic settings or said component.

What to do for component protection?

The only way to remove component protection is to take the car to a VWAG specialist with the online diagnosis system (ODIS) or the main dealer themselves.
We have invested heavily in obtaining the credentials and correct system, to be able to provide such services so you don’t have to have the huge cost of a trip to the dealer.

How to do component protection using ODIS software:

Activating component protection of a new ACC sensor.

This is un-edited and has no “fly in descriptions”

Here you go.

34-1 34-2 34-3 34-4 34-5

34-7 34-8 34-9 34-10 34-11

34-12 34-13 34-14 34-15 34-16

34-17 34-18 34-19 34-20 34-21

34-22 34-23 34-24 34-25 34-27

34-28 34-29 34-30 34-31 34-32

34-33 34-34 34-37 34-38 34-39

34-40 34-41 34-42 34-43 34-44

34-46 34-48 34-49 34-50 34-51

Note that Use name and passwords are unique to each and every subscriber of ODIS. This is the official version and not the cloned copy VAS 5054A or VAS 6154 or VXDIAG VCX NANO… all are confirmed to work good with ODIS to do online component protection.

VAS 6154 wifi Vag Diagnostic Tool VS VAS 5054A Which one is better?

VAS 6154 WIFI is the latest VAG diagnose interface for audi , vw , skoda , seat . VAS 5054A is the old VAG diagnose tool. VAS 6154 is the Latest diagnostic and programming interface for the applications VAG ODIS-S (Service) and ODIS-E (Engineering) which replace the VAS 5054A , cover all the functions of VAS 5054A.

QQ图片20170905144603

QQ图片20170905144552

What is the difference between VAS 6154 and VAS 5054A ?

The different:
1. Connection method:
VAS6154A: connected via USB, WIFI
VAS5054A: connected via USB, Bluetooth
2. Vehicle list:
VAS 6154 supports VW, Audi, Skoda vehicles from 2000 year to the newest & future car models;
VAS 5054A supports VW, Audi, Seat, Skoda, Bently, Lamborghini.
3. Software compatible:
VAS-PC V19: VAS 6154 software CANNOT support it! use vas-pc v19 with VAS 5054A
ODIS: VAS 6154 only works with ODIS 3.0.3 or newer; VAS 5054A can work with odis new or old
4. Remote programming:
As for remote programming through VAS-PC software, you have to use VAS 5054A or VAS 5055 head.

The VAS 6154 cloned head only works with obdii diagnostics and online programming.

VAS 6154 clone and VAS 5054A china clone share the same features:

Both working with ODIS service 4.1.3 software crack:

QQ图片20170905144538

ODIS 4.1.3 with ODIS 6.75 Engineer Version with ETKA 7.5 Plus Elsawin 6.0
– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,
used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping of diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
– ODIS Service Software update has been stabilized

For more detail information about how to activation vas 6154 software, please contact our sales – sales@obd2tool.com