How to do VWAudi Component Protection with ODIS software

VAS6154 ODIS Component Protection User Manual:

What is Component Protection:

Component protection is VWAG’s (VW, Audi, Seat, Skoda, Bentley, Lamborghini) way of eliminating vehicle or component theft by keeping track of each individual component and which vehicle it’s assigned too from the assembly line.

Why do you need to do component protection:

When a component protected module is fitted to its non-original vehicle, many, if not all of its functions will be limited. This is to try and prevent the use of stolen parts in the second-hand market. If a VWAG vehicle is reported stolen, a flag will be raised with their database for the vehicle’s VIN and the internal serial number/coding of each module fitted to said vehicle, such as an Engine or transmission ECU, Infotainment/Radio unit or AC/Heater control panel) making it impossible for these parts to be used on another vehicle. This will raise an error within our diagnosis system (connected to VWAG’s servers) when trying to remove the component protection and not allow the technician to proceed, alerting VWAG to the use of stolen parts.

Component protection also applies to any brand-new parts purchased and fitted. It would need to be removed before the technician could proceed with and coding, adaptions, or basic settings or said component.

What to do for component protection?

The only way to remove component protection is to take the car to a VWAG specialist with the online diagnosis system (ODIS) or the main dealer themselves.
We have invested heavily in obtaining the credentials and correct system, to be able to provide such services so you don’t have to have the huge cost of a trip to the dealer.

How to do component protection using ODIS software:

Activating component protection of a new ACC sensor.

This is un-edited and has no “fly in descriptions”

Here you go.

34-1 34-2 34-3 34-4 34-5

34-7 34-8 34-9 34-10 34-11

34-12 34-13 34-14 34-15 34-16

34-17 34-18 34-19 34-20 34-21

34-22 34-23 34-24 34-25 34-27

34-28 34-29 34-30 34-31 34-32

34-33 34-34 34-37 34-38 34-39

34-40 34-41 34-42 34-43 34-44

34-46 34-48 34-49 34-50 34-51

Note that Use name and passwords are unique to each and every subscriber of ODIS. This is the official version and not the cloned copy VAS 5054A or VAS 6154 or VXDIAG VCX NANO… all are confirmed to work good with ODIS to do online component protection.

How to install crack ODIS-S 4.2.3 on best VAS 5054 with AMB2300 chip

The best VAS 5054A with AMB2300 chip is compatible with the newest crack ODIS-S 4.2.3 on Win7 system. Here I’d like to offer the installation guide.

9-1
9-2

As you can see from the following full package and PCB, it is good quality.
9-5
9-3
9-6

Also the other available car diagnostic scanner VAS5054A interfaces are tested working fine with the crack ODIS-S 4.2.3, here are some examples (click the red link for details):

Green pcb built-in with OKI chip
Blue PCB with OKI chip
Green PCB, cheapest one, share the same factory with SP33-BO
VAS 6154

To learn their difference, you are advised to read: How to choose a best vas5054a clone? Generally speaking, the more expensive, the better interface is.
Or you already have a VAS5054A interface and considering to update crack ODIS-S 4.2.3, here is good source:

http://www.obd2tool.com/goods-5254-VAS+5054A+With+OKI+Chip+VW+ODIS+V301+Plus+Dell+D630+laptop+ready+to+Use.html

Working: 100% yes

Keygen: yes, no need to active by sending HW ID to somebody.

Computer system requirements:
– VAS 5054, VAS 5054A and VAS 5055 work on Windows 7 i.do client on existing systems until 2019 or acquire the Windows 7 i.do. client from IT Client Support for replacement devices.
– new diagnostic interface VAS 6154 (known as the WLAN remote head) works on Windows 10, win7.

ODIS-S 4.2.3 License:
Audi, FAW Volkswagen, Shanghai Volkswagen, Skoda and Volkswagen, same as ODIS 4.1.3.
All license can be installed in one same computer.

ODIS 4.2.3 released notes:
Functions in version 4.2
The key features newly added or revised in release 4.2 are described briefly in this section and the additional CCB_DS IDs implemented are cited.
CCB 1127 The update check when starting ODIS Service should be “silent”.
CCB 1140 Functional Tester Send Present Request only once
CCB 1589 support of new VW cross section load books
CCB 2004 Display of a support guideline
CCB2015 Farsi (RTL) language support
CCB1692 Display connection quality VAS6154
CCB1968 trace records for DoIP
CCB2038 Read and display DTC snapshots

Defect resolution in version 4.2 The problems resolved in release 4.2 are described briefly in this section. 19502 In the case of end-of-life vehicles (European market), the start of diagnostics remains “waiting for synchronization”

16858 Update OS 2.2.4: VAS 6558-6558A ODIS is available twice in the program and functions after the update.
18569 Flash abort while flashing the climate control unit via DoIP
18648 OS 3.1 TPI Reference to diagnostic object (extend inspection plan) partially not functional
18751 Metrology is not automatically removed or uninstalled using ODIS Service Uninstall
18891 Softing feature on Windows 10 computer
19131 Control unit 0025 Immobilizer is not automatically identified when boarding the A8_2003
19171 Network status is not detected correctly on OS 4.0 and VAS6154 USB
19182 ODIS Service 4.0.0: The green arrow is missing on the Finish / Next button
19207 Read identification data, ident status is not displayed in the print log.
19227 log files are filled with ArrayList messages
19247 ODIS S: different tester present behavior between diagnosis and flashing
19251 OS 4.1.0 Build 41_3_0_1 contains the wrong Diagnostic_Data_Hook
19278 Entry of a special character “_” or “-” (underscore, hyphen) is not possible when installing in the hostname of VAS 6154
19289 Evaluation of unauthorized event memory incorrect
19296 Saved diagnostic session cannot be loaded
19298 Error while logging in to CPN via the button Info-medium because of certificate VW-CA-Proc-07
19302 Information about the VCI at the top of the user interface disappears when the language is switched
19313 ODIS Service 4.1.3: The diagnostic protocol does not state that the communication is via DoIP.
Defect resolution in version 4.2
19318 OS 4.0.0 and 4.1.0: A not yet translated standard text is not displayed in the execution system when using a language as Created, it does not use fallback mechanism
19319 OS 4.0.0 and 4.1.0: A text module is not displayed in the execution system when using a language other than Created
19325 OS 4.1.0: When using placeholders with TextIDs, text blocks or ANSI text blocks, a NULL is returned instead of these texts. The placeholder (variable) is displayed correctly.
19350 Spelling errors in the setup.configurator: Special characters instead of special characters
19370 OS 4.1.3 Malfunction of the status display of the network

connection
Supported vehicles with Version 4.2 Approved AUDI vehicles
All AUDI vehicles are supported Approved Volkswagen vehicles
All Volkswagen vehicles are supported Approved Volkswagen Nutzfahrzeuge vehicles
All Volkswagen Nutzfahrzeuge vehicles are supported Approved Seat vehicles
All Seat vehicles are supported Approved Skoda vehicles
All Skoda vehicles are supported Approved Bentley vehicles
All Bentley vehicles are supported Approved Lamborghini vehicles

The following Lamborghini vehicles are supported: Gallardo from MY09-MY14 (only immobilizer and Radio PIN Code) Aventador und Huracán Approved Bugatti vehicles
Bugatti Veyron and Bugatti Chiron are supported Approved MAN vehicles
MAN-TGE is supported

US$328 – Newest VAS6154 Diagnostic Tool ODIS V4.13 Plus Dell D630 laptop ready to Use

9-7

US$328.00 – Best Quality VAS 5054A ODIS V4.1.3 Bluetooth Supports UDS Protocol with OKI Chip

Best Quality VAS 5054A ODIS V4.1.3 Bluetooth Supports UDS Protocol with OKI Chip

US$90.00 – Best Quality VAS 5054A ODIS V4.1.3 Bluetooth Supports UDS Protocol with OKI Chip

9-8

US$109.00 – Newest VAS6154 Diagnostic Tool for VW Audi Skoda with ODIS 4.13 Software Update Version of VAS 5054A

9-9

US$90.00 – New VAS 5054 Plus ODIS V4.13 Bluetooth with OKI Chip Support UDS Protocol

9-10

US$299.00 – VAS 5054A With OKI Chip VW ODIS V4.13 Plus Dell D630 laptop ready to Use

9-11

US$83.50 – New VAS 5054 Plus ODIS V4.13 With OKI Chip Without Bluetooth

9-12

US$73.50 – New VAS 5054 Plus ODIS V4.13 Without Bluetooth and OKI Chip

9-13

US$95.00 – VXDIAG VCX NANO 5054A ODIS V4.0.0 Supports UDS Protocol and Multi-languages with WIFI

9-14

US$70.00 – Lowest Price VAS 5054A ODIS V4.1.3 Bluetooth VW Audi Skoda Seat Vag Diagnostic Tool

9-15

How to get clone VAS 5054A ODIS of high quality?

1- distinguish from board colour
There are mainly three kinds of VAS 5054A ODIS scanners in China, with three different printed circuited boards- green 5054a PCB, blue and white PCB, displayed as follows:
The green 5054A hardware stands out among the three ones, tested by thousands of users without any issue when diagnosing or modifying.
* Reference: How to tell printed circuited board (PCB)?

2- differ from Bluetooth module
You can see two types of Bluetooth modules in the markets:
Bluetooth A:
AMB2300 chip – it’s Bluetooth v4.0 module usually in VAS 5054A OKI Chipvas 5054a (better in Bluetooth performance)
Bluetooth B:
it’s Bluetooth v2.0 module, usually in 5054 plus
High quality VAS5054A with Bluetooth AMB2300 module
Normal 5054 plus scanner with ordinary Bluetooth module
Note: not all 5054a scanners come with Bluetooth module; but you can add it yourself if equipped with knowledge and technique.

3- tell from OKI chip
OKI Chip is an important component that it can support USD protocol for old cars.
The newly designed 5054a can support UDS and PWM protocols for new and old VW, AUDI, Skoda, Seat cars.

Conclusion:
So, combined with all good components, a high-quality VAS 5054A scanner should be designed with an AMB2300 Bluetooth module and OKI chip in a green board, verified to run well with ODIS 3.0.3 software from OBD2TOOL.

VAS 5054A ODIS Software Installation Steps with Patch Download

VAS 5054A ODIS Installation Steps

VAS 5054A ODIS New Generation ODIS Diagnostic System Introduction. ODIS System integrates VW Group’s main application system, improves greatly on the efficiency of diagnosis.

If you want to buy it, please check here.

We tried to install the VAS 5054A ODIS in Dell D630 laptop, the installation is smooth, and you need the path to finish the installation, then the software able to work. Here i list the installation steps below:

1.Put the DVD into DVD rom, and right click open

1
2.Double click to run the setup exe file

2
3.Choose the language you want to install and press ok

3
4.Click Next to continue

4
5.setting as default path, if you click next

5
6.Click next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/6.jpg
7.If you want to define other languages, you can choose here, we click next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/7.jpg
8.Choose standard PC/ laptop, then click next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/8.jpg
9.Choose the hardware as VAS 5054A

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/9.jpg
10.Click Next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/10.jpg
11.here you choose the VAS 5054A ODIS path location

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/11.jpg
12.Choose the licence file, double click

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/12.jpg
13.Click next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/13.jpg
14.Virtual Keyboard choose it and click next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/14.jpg
15.Click next

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/15.jpg
16.Click Finish

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/16.jpg
17.Find the patch folder of VAS 5054A ODIS, then open it

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/17.jpg
18.Copy this file

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/18.jpg
19.Paste into the install patch and replace the old file to crack

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/19.jpg
20.Choose yes to apply the replacement.

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/20.jpg
21.Now double click the ODIS icon on the desktop

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/21.jpg
22.You can see the details information here

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/22.jpg
23.Choose Select the local directory

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/23.jpg
24.Find the postsetup folder in the Install DVD

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/24.jpg
25.Click right arrow

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/25.jpg
26.Click the right arrow again

http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/26.jpg
27.Finish installation now you are able to use the software!
http://cheapobd2.com/wp-content/uploads/sites/2/2017/03/27.jpg
The installation of this software is not difficult, if you need the VAS 5054A ODIS patch, vas 5054a ODIS crack file, please you can download here.

If you need help or assistance with the software installation, please kindly contact with our online customer service or leave comments in this post.

How To Use VAS5054A

20170219kastol

Nice! OBD2TOOL just managed to make VA55054 recognize ODI5 2.0 software and detect driver. Put it here for sharing.

The Way To Use VAS5054A:
1.Access Via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
2.Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.

VAS 5054A has a rather long title: VW Bluetooth VA5 5054a ODIS interface with OKI chip supporting UDS protocol. Bluetooth is easy to understand. What the ODIS, OKI chip and UDS protocol stands for respectively?

1)VAS    5054a ODIS
ODIS, short form of Offboard Diagnostic Information System, is the newest software, the replacement of VAS-PC software of VA5 5054a. VAS 5054a is the name of hardware. With the ODIS, vas 5054a odis is able to carry out powerful function, like read error codes, clear fault codes, display live data etc.
ODIS Computer requirement:Windows XP (SP2/SP3 operating system)

2)OKI chip
Why do we need this chip and what the difference between VAS 5054a with KIO chip and v/ithour OKI chip? OKI chip is designed to be used for SAE J1850 PMW protocol and UDS protocol. Some people may argue that OKI chip is useless for VAG group, but for Ford PWM/VPW protocols it plays an important role. If you need not need OKI chip, you can still choose VAS 5054 without OKI chip.

3)UDS Protocol
UDS is the short form of Unified Diagnostic Services. The ISO 15765 UD5 Blockset provides a MotoHawk application with an interface to a PC-based diagnostics application or a scan tool.
ISO 15765 is the specification for the CAN transport layer for Unified Diagnostic Services (UDS) and also legislated On Board Diagnostics (OBD) protocol as found in ISO 15031. UDS is an ISO standard which can be found in ISO 14229. vas 5054a oki chip is a common way to add OBD and provides the MotoHawk application with the capability of reporting self-diagnostics and trending information. The IS015765 block set by themselves do not provide diagnostics. It is the application logic which must be designed with the diagnostic capabilities and the mechanism for reporting the diagnostic information via a standardized protocol is through the use of these blocks.

2012 Audi A6L C7 oil warning light on

Car model: 2012 Audi A6L C7
Engine: CLX engine
Transmission: 0AW automatic transmission
Mileage: 50,000 km
Trouble syndrome: Oil warning light is on

Preliminary diagnoses: I use VAS 5054A to troubleshoot the cars ECU and got a fault code P164D, which indicates to Oil Pressure Switch for reduced Oil Pressure: Malfunction. I erased the fault code with the VW diagnostic tool and then test the cars oil pressure, which is 60kPa at idle, obviously far less than the normal 120kPa pressure. Then I search for the reason of less oil pressure based on the oil pump working principle, and find out a loosen pressure-limiting valve as shown below.

More Car ECU programmer at www.obd2tool.com
Preliminary analysis: I ask the driver if he had taken the car to maintenance recently, and he told me that the oil filter in the car was replaced recently. Hence, I am almost sure that the  light comes up because the oil line was blocked by the badly installed pressure-limiting valve.

Solution: I remove the pressure-limiting valve and reinstall it immediately, and the oil warning light then goes out soon.