Piwis 2 For Porsche Scanner Diagnostic Application Guide

Posted on March 17, 2019 by wp-admin

Piwis 2 for Porsche Scan Tool with V18.150.500 Piwis Tester 2 diagnostic software support diagnostic for Porsche till 2017. How to use the Porsche Piwis Tester II for Porsche diagnostic function?

Obd2tool.com Share Piwis Tester 2 Diagnostic Application Guide as follows:

Selecting Piwis 2 Basic Application Mode and Defining Other Settings:

1. First set the corresponding basic application mode (Standard mode, View mode, Simulation mode) as well as all other parameters by means of the control application.

Selecting the model range:

First, you must select a valid model range. This is selected in the PORSCHE basic system before starting the diagnostic application. After starting the Piwis 2 basic system, you can select the corresponding vehicle model ranges under the menu item Diagnosis. The diagnostic application is then started with the data of the selected model range.

Please refer to the corresponding documentation for information on operating the PORSCHE basic system. The following steps describe the basis procedure.

2. Secondly, we can start the basic system. The general interface is displayed where you can make basic settings.

3. Select the corresponding model range under the menu item Diagnosis. As an example, the Cayenne model range was selected here:

4. Application start with the data valid for this model range r selection of the model range,.

Piwis II diagnostic application can be continue to do Piwis tester 2 for Porsche scan tool diagnosis detail.

Customer need purchase the Piwis 2 Porsche Diagnostic Software V18.150.500 Porsche Piwis II Porsche Scanners just contact us freely.

PIWIS Tester II is fully operational diagnostic equipment

Posted on July 17, 2018 by wp-admin

Porsche Piwis Tester 2 is fully operational diagnostic equipment based on PIWIS vehicle interface and Porsche software. PIWIS II provides exclusive support for Panamera, Cayenne 92A, and all 2011 model range and above also provides legacy support for older models.

PIWIS II main functions
* General ECU diagnostics (DTC read/clear)
* Guided fault finding
* ECU programming/coding
* Real-time control parameters display
* Electrical schematics mapping

One year limited warranty and free update, registration support

PIWIS Tester II advantages
* Exclusive support for 2011 model range and above (Panamera,Cayenne 92A)
* Fast and stable connection
* Simulation mode (diagnostic session without VCI connection)
* End user capable DVD update
* Wired USB connection or wireless Wi-Fi connection

PIWIS Tester II equipment set includes
* Panasonic CF30 or CF31 notebook
* PIWIS II adapter (with Wi-Fi module)
* OBD and USB cables
* Laptop power adapter
* Preinstalled software

To purchase the equipment, as well as consulting, maintenance,please contact us:
Url: https://www.obd2tool.com
Email: sales@obd2tool.com

PIWIS II tool now for sale

Posted on June 11, 2018 by wp-admin

After surfing the net looking for some goodies for my ’06 C4 I cam across Porsche Piwis Tester II. This company Obd2tool.com is selling the PIWIS II system, it has offline and online functions, to support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Additional settings enabled for TPMS system with a borrowed gray market PIWIS. My 2006 C2S did not come with the TPM option. The hardest part of the retrofit was manually running wires as the wires were not in the front and rear main harnesses in my car. Then it needed programming with PIWIS to activate.

The biggest difference with the track tire settings is you define the target pressures. The other settings are predefined base on summer vs winter, 18 vs 19, partial vs full load. Not positive but I think the size option was also enabled.

The “Track Tire” is the special setting. There is an option in car diagnostic scanner PIWIS to rename it to whatever you want. My OCD struggled with “Track Tyre” to match the other settings or “Track Tire” as it’s properly spelled where I live. I settled on the latter

How to disable Porsche 911 DRLs with Porsche PIWS2 Tester 2

Posted on April 24, 2018 by wp-admin

Daytime Running lights (DRLs) sometimes are annoying. Professional Porsche OBD diagnostic software dealers are possible to disable them.

Hardware options:

Porsche PIWS2 Tester 2 V18.1 diagnostic system

AllScanner VXDIAG VCX-PLUS PIWS2 tester 2 V18.1 diagnostic tool

VXDIAG multi diagnostic tool for Porsche PIWS2 Tester

NOTE:
The function is only available in countries where daytime running lights are not mandatory. Look up the Porsche menu and confirm it has the DRLs disable option, In USA, daytime running lights are not mandatory while in some other countries like German Daytime running light does not.

Instruction:

1)Setting the daytime running lights

Make sure the vehicle is in stationary or moving at walking speed when change the “Daytime Run Lights” function.

The dimmed headlights will always illuminate when the engine is running which indicates that the “Daytime Run. Lights” function is active.

This applies regardless of the light switch setting. The lighting for the instruments and switches is still switched on and off using the light switch regardless of the “Daytime Run. Lights” setting.

2) Install PIWS2 TESTER 2 software

Check obd2tool.com webpage to follow the Piwis tester 2 setup and software installation video instructions.

3) Click “INFO” Tab.

Hit “OPTION” button or click the icon of the same name in the deader

Select “Individual memory” option

Select “Light”

There are two options, activate and deactivate. Select “Daytime Run. Lights” to Deactivate().

Porsche Piwis Tester II

Posted on April 21, 2018 by wp-admin

Porsche Piwis Tester II Function
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Porsche Piwis Tester II Support Vehicle
911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera

Piwis tester 2 with CF30 Laptop For Porshe
1. Software Version: 18.100
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By CD or HDD (One Year for Free, It can not be updated online. 200USD for one time update after one year.) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them.
7. Support Key Programming function,cost 210USD per time ( you need consult our customer sevice first with the type and year of your car)

Профессиональный диагностический сканер Porsche PIWIS Tester II

Posted on March 1, 2018 by wp-admin

Дилерский автосканер Porsche PIWIS II предназначен для проведения полнофункциональной диагностики автомобилей концерна Porsche ( поддерживает весь модельный ряд, в том числе Porsche Panamera и новый Porsche Cayenne до 2014 года выпуска включительно) . Включает все режимы работы от диагностики до адаптации и программирования.
Сканер поставляется в комплекте с ноутбуком Panasonic CF-30 на который установлена дилерская программа для диагностики автомобилей Porsche.

Porsche Piwis II дилерский сканер для диагностики автомобилей Porsche. Версия 2013 года.

В отличие от предыдущей модификации Porsche Piwis, предназначенной для автомобилей до 2005 года, поддерживает все модели автомобилей. Актуализация применяемости автосканера выполняется путем обновления программного обеспечения и кодов неисправностей.

Диагностика автомобилей Porsche Panamera осуществляется только с помощью сканера Porsche PIWIS Tester II.

Сканер может быть укомплектован ноутбуком Panasonic CF-30, оснащенным программой дилерской диагностики Porsche.

Функциональные возможности Porsche Piwis II

* Чтение, стирание кодов ошибок DTC
* Обработка потока данных PCM.
* Многоязычный интерфейс управления автосканера, включая русский.
* Запись и воспроизведение стоп-кадров изображений и технических параметров с ЭБУ и датчиков
* Тестирование исполнительных механизмов
* Программирование иммобилайзеров
* Кодирование электронных ключей
* Интегрированная система поиска неисправностей
* База по электрическим схемам ( авто после 2005 года)

Охват тестера Профессиональный диагностический инструмент Porshe Piwis II

* 911(997)
* Boxster/Cayman (987)
* Cayenne
* Panamera

Диагностируемое оборудование и системы

* Двигатель (ENG).
* Климат-контроль.
* Подушки безопасности (SRS).
* Антиблокировочная система (ABS).
* Антипробуксовочная система (ASR).
* Оригинальная противоугонная система.

Комплектация Porshe Piwis II

* Автосканер
* Ноутбук с установленным программным обеспечением
* USB кабель
* Блок питания
* Кабель OBD

Porsche Piwis II V18.150 SSD Win732Bit for Piwis II JDiag Elite II

Posted on February 28, 2018 by wp-admin

Porsche diagnostic tool Porsche Piwis II V18.150 SSD Win7/32Bit for Piwis II / JDiag Elite II

Porsche Piwis II V18.150 SSD can work with Porsche Piwis II Scanner or Porsche JDiag Elite II Pro Scanner .

It comes with 128GB SSD, Win7 / 32Bit system, can work with most laptops which accept 2.5 inch Sata HDD.

Win7 system SSD makes it run much faster than normal Porsche Piwis Tester 2 software Which run XP system.

There has Standard Mode and Enginner mode inside software, you can switch yourself. The enginner mode only can be in German, no other language for choosing.

Standard mode is multi-Languages, you can change the one you need when using software:

Software Languages:
English
Francais (French)
Italiano
Espanol (Spanish)
Japanese
Chinese
Pyccknn (Russian)
Português (Portuguese)
Nederlands (Dutch)
Deutsch(German)
US English
License is Unlimited, you can use it as long as you want .

Important Notice:
1.This software SSD only for the Auto Scanner Tools Piwis II which is Semtec Hardware, not fit for the Piwis ii J2534 Scanner
2. We only offer 1time free active for this software, if you want to active again, it will cost 299USD
3. We do not offer technology support for the enginner mode, please make sure you know how to use it before you switch it.
4. Not offer free update for this SSD
If you want hardware to work with this SSD, you can check Porsche Piwis II Hardware.

Here are the pic for the WIN7 Software SSD for your reference:

Porsche Piwis II V18.150 SSD Desktop

Piwis II V18.150 SSD Desktop Main Screen

Piwis II V18.150 SSD 911 Vehicle

Piwis II V18.150 SSD Boxster Vehicle

Piwis II V18.150 SSD Caynne Vehicle

Piwis II V18.150 SSD Other Model Lines

Piwis II V18.150 SSD TOOLS

Enginner Mode Change

Wiring Diagram

Wiring Diagram for Piwis ii

Wiring Diagram for 911

Wiring Diagram for cayman

Wiring Diagram

Wiring Diagram For Macan

How to Setup and Use WIFI Samtec Piwis Tester II V18.10 ?

Posted on July 24, 2017 by wp-admin

Porsche Piwis Tester II V18.10 is the newest generation diagnostic tool for Porsche cars. New Tester II with original Samtec Chip and latest software v18.01 to support firmware updating and compatibility 2017 Porsche cars. Currently,there are two types of V18.10 Samtec Piwis Tester II available in the marketplace,one is Samtec Tester II Diagnostic Tool,the other one was WIFI Samtec Piwis Tester II V18.10 . And just as the name suggested, the only different between these two types lies in whether there has wifi diagnosis supporting. And now,both Piwis Tester II by Samtec and WIFI Piwis Tester II are full in stock at Obd2tool.com with great price.

And following is a PIWIS II WIFI User Manual to give users a step by steps guide on how to set WIFI function for Piwis Tester II V18.10 For Porsche,hope it will be useful.

Things you need to know about Samtec Piwis Tester II WIFI

1.The pacakge comes with a HDD.

2.Porsche Piwis Tester 2 for Porsche OEM Wireless Solution Released! The wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi signal is really strong.

3.You will get One year free maintenance and free updating ,but Long-term technical support

4.Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN

WIFI Samtec PIWIS II Setting Guide

Step 1 : need connect the USB cable to laptop, then setting in [VCI Config] by inputing the SSID and Password of router.

Step 2 : After configuration ,pls remove USB connection from your PC.

Step 3 : Install Samtec Piwis Tester II V18.10 Software and follow the system guide to enter Piwis Tester II V18.10 Software home menu like pix show

Step 4 : Then you can choose operation to programmer or diagnostic for your Porsche

Step 5 : After finish diagnostic, please quit the connection, and quit to the homepage of the automotive diagnostic equipment, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged)

Porsche PIWIS II 16.800 Upgrade

Posted on June 3, 2017 by wp-admin

Porsche PIWIS II 16.800 Upgrade

What’s New
1.Wireless working now possible through WLAN connection to vehicle interface and to network by way of a router
2.Very robust design (resistant to splash water and impacts)
3.More comfortable to work with through high-performance processor (No long waiting periods)
4.Integrated keyboard
5.Diagnostic scopes for Porsche Panamera
6.Simultaneous communication with several control units possible
7.Docking station with flexible mounting capabillity

Porsche diagnostic tool Porsche PIWIS TESTER II release last version: 18.100, Contact us for support.

Porsche Piwis Tester II Porsche Auto diagnostic scan tool V18.100 Software Installed in CF30 Laptop

Posted on April 1, 2017 by wp-admin

Porsche Piwis 2 Porsche Auto diagnostic scan tool V18.100 Software Installed in CF30 Laptop

Notice:
The CF30 laptop is the renewed laptop not the completed new one, if you want to buy Piwis Tester II with a new laptop, we can offer Lenovo E49AL, please contact before-sale service to confirm.

Porsche Piwis Tester II Main Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Piwis Tester II for Porsche works with the old and latest for Porsche cars. It is equipped with the Panasonic laptop and original software for the test.Piwis Tester II for Porsche can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new for Porsche Piwis Tester II by the end of 2010. Piwis Tester for Porsche I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Piwis Tester II for Porsche.
5. When Piwis Tester II for Porscheis distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Porsche Piwis Tester II Support models:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year for Porsche car models

Special function for Piswis Tester II:

1. Requires Online Modules: F BCM R BCM DME ELV SRS KEY
2. Bluetooth,GPS and Navigation Function are available. (The customer can buy this function from Porsche factory)
3.Support Key Programming function,cost 210USD per time ( you need consult our customer sevice first with the type and year of your car)