Mb Star C3 Mercedes Diagnostic Full Set + Dell D630 Laptop Diagnosis

mb-star-c3-2

The software program Xentry/ DAS is a bit sluggish on an outdated IBM so that it’s price paying a bit additional and getting a Dell D630. HDD that is pre-loaded with the software program for SDConnect 4 by the vendor, is inserted into the DELL D630… The DELL D630 is the quickest laptop computer with the RS232 characteristic. D-A-S The Analysis Help System, a concise interface and a straight-ahead operation added to a excessive-quality Dell laptop giving Seller level access to code studying and the complete automobile testing systems and sensor reading. MB Star Diagnostic Instrument sequence are the Mercedes-Benz approved supplier diagnostic systems for troubleshooting and programming. Simply give you the self-take a look at report and the number, you’ll find out what’s the matter with this tool to avoid the transport charge when this software need fix. After one yr, if you want to update, that you must pay fee. We’ll show you the photographs of the products and packages earlier than you pay the stability.

What is the supply date9 Our products are normally shipped within 45 days after order confirmation. Briefly, they are nearly the same good quality and features, it is as much as you to decide on which one is your greatest needed. High quality Mb Star C3, MB Star C4,MB STAR C5, MB STAR C6 ,with completely different versions now are available in UOBD2. Consideration: Some customers might imagine they will not register the machine till they need to update, in order that they’ll replace to extra new variations within this one yr. Assume how jealous you’re mates shall be if you inform them you got your mb star c3 multiplexer on AliExpress. Get a C3 multiplexer and the earliest version of the software that you could find. MB C3 STAR MULTIPLEXER( BenZ VCI) 2. Sixteen PIN OBD II cable (OBD Diagnostic Socket ) three. 38 PIN cable (Outdated Benz Spherical Socket ) 4. 14 PIN cable (Dash. BenzMercedes Benz Star Analysis systemfrom obd2tuning.com includingMB Star interface,Mercedes C3 multiplexer, MB SD C4, Xentry Connect C5 and other Mercedes Star prognosis Software program Xentry das Hard Disk that may work with MB star C3 pro or MB C4 SD Join. Mb star diagnsois compact three is preofessional for Mercedes Benz all car contains truck!

HDD Tremendous mb star package deal included: 1. MB C3 STARMULTIPLEXER (Benz VCI) PIN OBD II cable(obd Diagnostic Socket ) PIN cable(old Benz Round Socket ) PIN cable(dash. Update on Super mb star official webpage free for one year. A: This one has offline coding perform. I used to be very hesitant in buying one of those Chinese gadgets. The opposite option can be to get a C4 system, but then they value extra. It’s extra convenient for customers as a result of the software program for C3/SD C4 diagnostic tool will be pre-installed earlier than delivery. Q:Is this instrument capable of work with Reset the Mercedes-Benz SBC Perform? IBM ThinkPad to work properly. Over time, a whole bunch of laptops were examined for compatibility but solely 2 laptops had been found to work appropriately. Truck Assist Listing:Actros963/four, Actros2,three, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Gentle, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK. For instance: If the model you purchased is 2013.3 and you don’t register it till 2014.4 software program release, then you’ll discover your 2013.3 hdd can not run 2014.Four software immediately.

The software program you get will normally be preinstalled onto a laptop computer or arduous drive for you to install into your individual laptop. Preinstalled is lots easier than doing it yourself and will save you 2 or 3 hours of installing and messing around. Energy can be equipped to unique pc (COMPACT3) through the cables. We offer online service 24 HRs, our after-sales service males can enable you to remedy the problem by teamviewer, just contact the gross sales. Michael Luo was the gross sales rep who instantly responded to my inquiry on the machine and he instantly responded to all my emails and questions within a day at worst. It could readout and erasing trouble code; read the real-time knowledge of sensor and actuator; code and program. Exterior hdd can be utilized on any kind of computers. T30 HDD fit IBM T30 laptop. It turned out that I needed to delete the drive letter from the main partition where my unique XP picture was. Don’t use the model on the hard drive in case it’s contaminated with trojan, virus, malware.

How to active MB Star SDC4 Xentry 2018.12 on Win7

MB SD Connect C4 2018.12 is available with DELL 500G HDD and Solid Hard Disk 256G.
Following paragraphs are on instructions.

DAS
Open “Get Hardware ID”, Copy the HardwareID and send it to the dealer for generating “license.dat”
MB-Star-SD-C4-Xentry-2018.12-on-Win7-1
Open “license.dat”

MB-Star-SD-C4-Xentry-2018.12-on-Win7-2

Open”DAS”
MB-Star-SD-C4-Xentry-2018.12-on-Win7-3

MB-Star-SD-C4-Xentry-2018.12-on-Win7-4

EPC WIS
Open”EWA net”
MB-Star-SD-C4-Xentry-2018.12-on-Win7-5

Name admin
Password 12345
MB-Star-SD-C4-Xentry-2018.12-on-Win7-6

MB-Star-SD-C4-Xentry-2018.12-on-Win7-7

MB-Star-SD-C4-Xentry-2018.12-on-Win7-8

MB-Star-SD-C4-Xentry-2018.12-on-Win7-9

Open”CarProKey”

MB-Star-SD-C4-Xentry-2018.12-on-Win7-10

MB-Star-SD-C4-Xentry-2018.12-on-Win7-11 MB-Star-SD-C4-Xentry-2018.12-on-Win7-12 MB-Star-SD-C4-Xentry-2018.12-on-Win7-13 MB-Star-SD-C4-Xentry-2018.12-on-Win7-14 MB-Star-SD-C4-Xentry-2018.12-on-Win7-15
XENTRY Diagnosis
Open”ConfigAssist”
MB-Star-SD-C4-Xentry-2018.12-on-Win7-16

MB-Star-SD-C4-Xentry-2018.12-on-Win7-17 MB-Star-SD-C4-Xentry-2018.12-on-Win7-18 MB-Star-SD-C4-Xentry-2018.12-on-Win7-19 MB-Star-SD-C4-Xentry-2018.12-on-Win7-20

MB-Star-SD-C4-Xentry-2018.12-on-Win7-22 MB-Star-SD-C4-Xentry-2018.12-on-Win7-23

MB-Star-SD-C4-Xentry-2018.12-on-Win7-24
Open Computer –Local Disk C-ProgramData-LicDir  copy “lic_key_2.dat”, rename “lic_key_2.x4711″ Set to read-only file
MB-Star-SD-C4-Xentry-2018.12-on-Win7-25

Video guide:

Xentry DAS & HTT-WIN Star Diagnosis Softwares

Mercedes Star Diagnosis software 2018.12 Version release work with Mercedes SD Connect C4, SD C5 for SCN coding online no error. 2018.12 Mercedes Star Diagnosis come with Xentry DAS HTT-WIN for Mercedes Benz old & new cars till 2018. What’s the difference of HHT-WIN and Xentry and DAS? why choose obd2tool.com 2018.12 Mercedes Star Diagnosis software? Check the reasons below.

2018.12 Mercedes Star Diagnosis come with Xentry DAS HTT-WIN on windows 7 32 bit System

Xentry-DAS-HTT-WIN-1
2018.12 Xentry diagnosis software is the latest version software available for SCN Coding programming, the software such as Xentry 2017.05, Xentry 2017.09 cannot login for SCN online coding again.
2018.12 Xentry diagnosis software installed win7 32bit system with HHT-WIN software work for old model, some other Xentry diagnosis software with 64 bit NOT includ HHT-WIN software.

HHT-WIN vs Xentry vs DAS:
Xentry took me to DAS, and DAS switched over (automatically) to good old HHT-WIN, again. Guess my 16-year old SUV’s system is a bit ancient in the scheme of Mercedes-Benz technology.

From what I’ve seen:
All MB from late 80’s to 99 = HHT-WIN
All MB from 2001 to 2009 = DAS
All MB from 2010+ = Xentry

The year 2000 is a weird transition period — some MB made in 1999 but the model year is 2000 will be diagnosed from the 38-pin under the hood and thus use HHT-win. Other MB made in early 2000 and sold as a 2000 model will have the OBD port and the SDS will require the OBD cable to diagnosis….and will use DAS.

And then there are orphan cars, like some SLK models — some 2000-2001 SLK require the 38-pin.

I’ve even seen a 2000 E320 that had both 38-pin and OBD port — I could use either port to conduct a full diagnosis. That was funny.

HHT-WIN supports modules on Mercedes vehicles:
HHT-WIN should be able to read all Modules.
Having said that, for Model Years 1990 – 12/1993, the Roadster Soft Top Module has 30 possible fault codes associated with it.
Whereas for Model Years 1/1994 – 1996, the Roadster Soft Top Module has only 11 possible fault codes associated with it.

IMPORTANT: HHT-WIN is updated to 09.2018 Mercedes Star Diagnostic software disk. Software released in 2017 and 2018 doesn’t come with HTT-WIN. But now, it comes again!

HHT-WIN

mercedes SD Connect Xentry VS DAS VS HTT win Whats the Different Between Xentry DAS & HTT WIN Star Diagnosis Softwares

How To sovled V2018.12 MB SD Connect C4C5 HDD blue screen

mb-star-c4

Xentry Connect C5 provides complete diagnosis for newest hybrid W222,with a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software,it will allow you to work on windows xp, win7/8/10 system.

Customer’s problem:
We had purchased one set MB SD connect C5 with internal HDD from obd2tool.com, We really appreciate the faster shipment, all is well packed dhl week quickly received. But when we install the HDD to our computer, we have blue screen and doesn’t access to computer windows. We are wondering if we get the broken HDD……

Our Answers:

The BMW ICOM ICOM A2 A3 or MB Star C4 C5 drives we assign to our customers are generally AHCI-mode hard drives with SATA port.

If your laptop BIOS is not set to the same hard drive mode (AHCI mode), if you connected to our hard drive to your computer, there will be a blue screen or can not find the hard drive.Please make sure your HDD is set to AHCI in the BIOS.

To check this you turn the laptop on and press F2, it will enter the BIOS. Now go to “ONBOARD DEVICES” or “SYSTEM CONFIGURATION” then go to “SATA OPERATION” press enter and make sure its set to AHCI not ATA or any other option.

Please have a minimum of 2GB of ram/memory in your laptop, a lot of people only have 512mb or 1gb, it is OK but the new system may run slow and its recommend to really have 4GB ram, but 2GB also can be enough.

– We can supply Laptop + Software all ready for you.
– We can supply FULL package C4 SD + Laptop + Software for you. MB Star Diagnostic Tools
– We can carry out some C4 SD repairs.
– Remote installations available (if you supply the correct HDD size and install the correct Windows OS).
– Teamviewer remote support available.

2018.3 SD connect c4 software Xentry Das 100% Performs

New software program come!2018.03 MB SD Connect C4 computer software (XENTRY/DAS) is verified to perform together with the sd c4 diagnostic tool without having problems. Here is definitely the test report of it.

This can be the functioning mercedes software 2018.03

25 (1) 25 (2) 25 (3) 25 (4) 25 (5) 25 (6) 25 (7)

http://www.obd2tool.com/category-163-b0-MB+Star+Diagnostic+Tools.html

256GB Full New SSD, Good quality!

Most current software program version: V2018.three
Help Windows 7 technique.
NOTE:
Do not download something towards the software program, don’t update something with the computer software, otherwise the computer software will break down.(Specifically browser for example Google Chrome)
Mercedes bus diagnosis & programming can be done via DAS only, NOT Xentry.
Computer software languages: Chinese, English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish.

V2018.3 mercedes diagnostic tool MB SD C4 Software Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric technique Diagnostic;(Do not include flash code)
three.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

Testable systems:
ENGINE
AUTO-SPEED
AIRCONDITIONAL Method
SRS
ABS
ASR
MPL
GM
Bz ORIGINAL ANTI-THEFT
DASX Technique
KEYZESS GO Technique
OBD-II Program

Product computer software includes: (Version: 2018 )
1. D-A-S / Xentry 2018.3: the automatically Diagnosis Assistance System
Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car program testing
2. W-I-S net 2017.10: Workshop Information System
Supply the whole view from the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3. EPC.net 2017.10: Electronic Parts Catalog
4. ST Finder: Part Location Finder options: 2008 and 2016
5. STARUTILITIES : the movement management method and self-test
6. SDMEDIA 2014
7. PL71: 2016 Mercedes application with PL70

Function With:

SD Connect C4 Mercedes diagnostic tool from

25-8
25-9
。。。
25-13

Note: there are many versions of sdconnect china clone; please check the PCB design and make sure your mux is operating with all the application before you wanna purchase the software program.

BTW:another verison:2018.three MB SD Connect Compact C4 Software HDD Version link

http://www.obd2tool.com/goods-5197-MB+SD+Compact+4+Super+Engineering+Software+DTS+monaco++plus+Vediamo+V050006+Support+Offline+Programming.html

How to do 2009 Benz E350 Gas tank mod reset cluster

Purpose:do Gas tank mod reset cluster on my 2009 E350.

Tool option: MB SD Connect C4 with dell 6410 laptop(Has ssd, 4gb mem, so it should be quicker than a dell630.)

Here we go:

Found out how to reset cluster: See below part,  it’s towards the end of the post.

Gas Tank Mod (Gallons) ***Need Developer Mode***

14-1 14-2 14-3 14-4 14-5 14-6 14-7
14-8

After you hit F3 it will carry on the coding process (hit “F1” to go back)

so we can reset the ECU so coding can take effect by MB SD Connect C4.

14-4 14-5 14-6 14-7

So far I’m loving STAR. I am going to code the car this weekend for Bi-Xenons and then code the card to accept the OEM front LED city lights. I’m doing a e55 bi-xenon retro fit to replace the stock crappy h7 halogen e55 projectors.

Top Reasons to Get MB Star SD C4C5 and Laptop Full Package

Here list reasons why you should buy a Benz MB Star diagnostic tool with a laptop full package:

—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for mb star sd c4 purposes…

—Bought an older Dell D630 laptop with a serial port and plan on buying MB SD Connect C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.

Benz Star diagnosis C3 / C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.

—If your ever in the market for a faster SDS laptop, the Dell D630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.

—the HDD that is pre-loaded with the software for SDConnect 4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.

—Need to connect directly into a RS232 port without using an interface – this is why I went for the complete system with laptop.

—The software Xentry/ DAS is a bit slow on an old IBM so that it is worth paying a bit extra and getting a Dell D630.

—There is a very specific set of COM ports you must use for it to work. For example you need DAS to be looking at COMx within the VM session, then VMware needs to redirect that to COMx which is a ‘physical’ serial port on your machine.

—It’s probably because it has a real com port. Most laptops these days have just a USB port and things don’t always work right if you’re using a USB to RS-232 converter. You wouldn’t want to brick a component during an update if you’re using USB. The other option would be to get a C4 system, but then they cost more. I think there are a couple other systems out there like IBM that also have real com ports.

—The PART D mux(C3) is a serial ported mux—that’s the reason for the Dell and IBM older laptops.

—The PART W mux(SD connect C4) is and Ethernet/wifi connected system and that is the reason for use on other laptops—the issue is the operating system currently DAS Xentry only runs on XP.

—Plug and play!! It is more convenient for users because the software for C3/SD C4 diagnostic tool will be pre-installed before delivery.

Here are MB STAR diagnostic kits (tool+laptop) for sale:

all software pre-installed!!!
ready for use!!!

2017.12 Version MB SD Connect C4/C5 Star Diagnosis Plus Panasonic CF19 Laptop With Vediamo and DTS Engineering Software

3-1

2017.12 MB SD Connect C4 with Super Engineering Software DTS monaco And Vediamo Plus EVG7 Tablet Support Offline Program

3-2

MB SD Connect Compact 4 Star Diagnosis Tool 2017.12 Plus Dell D630 Laptop With Vediamo and DTS Engineering Software

3-3

V2017.12 MB SD C4/C5 Star Diagnosis Plus Panasonic CF52 Laptop With Vediamo and DTS Engineering Software Support Offline

3-4

MB SD C4 Star Diagnostic Tool With Vediamo V05.01.00 Engineering Software Plus EVG7 Tablet PC Support Offline Program

3-5

V2017.12 MB SD Connect C5/C4 Star Diagnosis Plus Lenovo T410 Laptop With DTS and Vediamo Engineering Software

3-6

MB SD Connect Compact 4 Mb star C4 Diagnosis Tool With WiFi 2017.12 Plus EVG7 Diagnostic Controller Tablet PC

3-7

How to recoverreset Xentry SD Connect C5

You can recover Benz diagnostic tool XENTRY Connect C5 to factory setting if it not working properly. Here is the step-by-step instruction provided.
XENTRY SDConnect MUX + Panasonic Tablet, check here

1.Make sure the Mercedes BENZ C5 multiplexer is in Standby Mode. Shutting down the XENTRY Connect.

17-1

2.Please connect the driver and power supply included in delivery to your Xentry connect and to the drive.

17-2

3.Power on the Xentry Connect with the key combination <Red Cross>and <Green Check Mark>. (Follow picture below)
17-3

You will be prompted to insert the XENTRY Connect update BD via a message on the display.

4.The update procedure starts automatically.
This will be indicated as follows on the XENTRY Connect display.
17-4

5.XENTRY Connect indicates the update completion on the display.
You can complete the process by pressing the <Green checkmark> button. Or wait until XENTRY Connect diagnostic system automatically shuts down (approx. 10 minutes after the image appears in the display).

17-5

6.To ensure your system is up-to-date, please install the add-ons after completing the update.
To do so, switch the XENTRY Connect on and connect the main unit via XENTRY Control on OBD2TOOL. You can start the “Updater” tool via the diagnosis desktop.
The add-on downloaded begins automatically.
Wait until all add-ons have been installed. The status is displayed on the screen.
Afterwards, you can use the XENTRY Connect normally. The update is then complete.

17-6

loading..