Inexpensive Diag Scanners for 1998 1999 Mercedes with 38 Pin Connector

Posted on May 21, 2019 by wp-admin

Topic:

looking for an inexpensive diagnostic scanner to troubleshoot a 1999 E430 W210
(as well as other older Mercedes models with 38-PIN round diagnostic socket).

Working experience:
I recently purchased an Autel MD808 PRO under the belief that it could, among other things, clear the “Service Engine Soon” instrument cluster readout on any Mercedes with OBD II. Per Autel Tech Department it can clear codes/instrument cluster readouts through the OBDII port…but only for years ’08 and newer, which I (frustratingly) discovered AFTER I had purchased and attempted to use it.

I saw there is a “Autel 38 Pin OBD2 Diagnostic Scanner Adapter Connector Cable for Mercedes Benz” their own product. So i want to find out if it will work with the DS808 Pro in all claimed capabilities.
It’s confirmed. There is no way to interface the 38 pin connector to the OBD II 16-pin connector with an “inexpensive” Autel scanner.
According to said tech department, there is NO ADAPTER that can be used to interface the MD808 Pro to the 38-pin connector. For that matter, the technician intimated that the tool that Autel produced that COULD interface and clear the instrument cluster readout was a >$4K model. That’s way to expensive for me.
The technician further explained that the ’99 Mercedes was a little ahead of its time, having BOTH the 38-pin connector found under the hood in the fuse box and the OBD II port under the dash. From what I understand, the OBD II port will allow the reading of ENGINE-specific data…but just about any inexpensive OBD II scanner can do that.
If there is an inexpensive scanner that can read ALL the data/systems AND clear the instrument cluster readouts, I would be interested in hearing about it/them.

Obd2tool.com recommendation:
Anyone who buys those $4 to $10 OBD2 to 38-pin adapter cables and expect to access all the modules is dreaming.
You need Mercedes special diagnostic scan tools.

1). Foxwell NT520 with Benz software pre-loaded + 38 PIN connector
(Price: less than $200 with 38-pin adapter)

This 38-PIN multiplexer adapter allows you to connect your Mercedes equipped with the older, round 38 PIN connector to a compatible Foxwell NT520 PRO diagnostic tool.

Foxwell NT644 Pro and GT80 with 38-PIN adapter certainly will do, but they are out of price range.

foxwell-benz-38-pin-cable-2
foxwell-benz-38-pin-cable-1

NT520 Pro Mercedes Benz model list:
A Class: 168 , 169 , 176
AMG GT: 190
B Class: 245 , 242/246
C Class: 202*(As of 06/97), 203 , 204 , 205
CL Class: 140*, 215 , 216
CLA Class: 117
CLC Class: 203
CLK Class: 208*, 209
CLS Class: 218 , 219
E Class: 210*(As of 03/97), 207 , 211 , 212
G Class: 461 , 463
GL Class: 164 , 168 , 166
GLA Class: 156
GLC Class: 253
GLE Class: 292, 166
GLK Class: 204
M Class: 163 , 164 , 166 , 292
Maybach Class: 240
R Class: 251
S Class: 140*, 220 , 221 , 222 , 217
SL Class: 129*(As of 09/99), 230 , 231
SLC Class : 172
SLK Class: 170(up to 2001)*, 170(after 2001) , R 171 , R 172
SLS Class: 197
SLR Class: Series 199

2). MB star Compact C4/Mercedes BENZ C5
If you want to access ALL the modules for your car, a MB Star C3 /C4/C5 clone is a way to go.
All MB SD control units are accessible, like engine ECU, ABS, Airbags, SRS, Aircon, Immobilizer, Keyless Entry and the rest of 40+ control units used in MB cars. You can Read / Delete Faults, Live Data, perform sensor actuation, read current configuration, initialization and a lot more.

All MB from late 80’s to 99 = HHT-WIN
All MB from 2001 to 2009 = DAS
All MB from 2010+ = Xentry
The latest MB star diagnostic system is compatible with HHT-WIN software for old Mercedes troubleshooting.

Related article: HHT-WIN Manual: Vehicles & Modules Support, SW Install, Reviews

3).
Some people use Delphi system for old Mercedes. i.e I use it on a 1998 E320, and I can access Engine computer, Transmission Control Unit, Instrument Cluster, Restraint System, Ignition (EIS), Climate Control, ABS/BAS, but it will not read body control modules, like SAM, PSE, door control modules, lower/upper console modules etc. This is good enough for me.
If you need the delphin system, please contact us via PM.
Disclaimer:
Parts of Mercedes owners prefer icarsoft scanners. iCarsoft MB II is the fact that it will not work on older models past 1993. It will not work on models that require a 38 pin connector such as the E 320 and CLK 430. In these models it can only read the ECU (check engine light). You also want to skip MB i980 which can only do ECU and SRS / Airbag diagnostic.

Why will you choose DoIP Xentry connect C5?

Posted on December 22, 2017 by wp-admin

Xentry Connect C5 provides complete diagnosis for newest hybrid W222,with a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software,it will allow you to work on windows xp, win7/8/10 system.

Why should you buy DoIP Xentry connect C5?

Original Plan 1:1 Copy Mercedes Wifi Xentry Connect C5 multiplexer For Mercedes Car And Trucks.

After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.

Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1, somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.

Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.

So , we suggest you buy Mercedes Benz DoIP Xentry Connect C5 MB Star C5 Plus Panasonic CF52 Laptop from us , We will install and activate for you ready to use. What’s more, this package offer saves you money than buying them alone.

After all, there are many reasons to choose Xentry C5 Connect. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.

Thus, by purchasing this equipment, you will not lag behind the progress. Each client of of yours, seeing with his own eyes ,that you are in your work using the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Xentry Connect DoIP Software List:

1.DAS 2017.12: the automatically Diagnosis Assistance System

2.Xentry 2017.12: New software released by Bennz Company after 04/2009 by diagnosis new cars.

3. WIS net 2017.04:Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

4. EPC.net 2017.04:Electronic Parts Catalog

5. ST Finder:Part Location Finder options: 2008 and 2016

6. STARUTILITIES :the movement management system and self-test

7. SD MEDIA 2014

8. PL71: 2016 Mercedes software with PL70

9. Engineer Software：DTS monaco V8.03 And Vediamo V5.01.00 Support Offline Programming

10. HHT Software for old cars

2017.12 DoIP Xentry Connect C5 Benz SD Connect PCB

DoIP SD Connect C5 in test:

Download OpenShell FIX for W204 207 212 in DAS standalone menu

Posted on November 24, 2017 by wp-admin

Free download the FIX enables the access to diagnosis of vehicle types W204 (C, GLK Class), W207, W212 (E Class) via DAS standalone menu, without XENTRY. Very convenient.

https://mega.nz/#!hTQ0kZIR!SStg4wbHAa_QdGz3No5gmkJ_7uaZ47UPzM0F4RhxAOs

Password: xdos_das_reem_fix1117

32bit Windows only, not 64bit

Note: it’s free, but not tested by professionals!!!!!!! unknown security and perhaps high risk sometimes!!!

You can go to http://www.obd2tool.com/goods-5194-MB+SD+C4+With+Super+Engineering+Software+DTS+monaco+And+Vediamo+Plus+EVG7.html

to have the tested Xentry/DAS, used with relief

Why Choose Real MB Star C5 with Engineer Software

Posted on November 24, 2017 by wp-admin

After test, Real MB STAR C5 with engineer software performed good and now is released.

Unlike the old clone C5 which uses C4 Internet Software, this Real MB C5 is 1:1 copy star C5. The newest hybrid W222 could still be diagnosed by this real Benz C5.

Following text shows the Real MB Star C5 features and some use tips. Move ahead.

First post picture of this real Benz diagnostic software MB Star C5：

Benz Xentry Connect C5

Real MB star C5 features:

1.It improves a lot in hardware and software.
2. With engineer software
3.Comes with one internal disc and one portable hard disk.
4.Comes with no computer.
5.No computer brand limit as long as the computer has 4GB storage at least and running Windows 7 – 32-bit or Windows 8 – 32-bit.
6.Update: for common update, dealer send update files to user for update; for special update, the user is supposed to ship back the disk to flash.
7.Real MB star C5 communication: Via Wlan (IEEE802.11 a/b/g/n2.4+5GHZ )
8.The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy Xentry connect?

After 2015, all Star Diagnosis equipment is no longer supported. That means there is no update diagnostic data for the newest cars and their systems. The lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.

At the end of 2014, among dealerships, almost all of them who previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost gone. Instead, dealerships choosed Xentry Kit kits which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, also they have a “civilian” version – the Panasonic Toughbook CF-D1, which has a more powerful configuration but shorter battery life than the original Xentry Tab.

Honestly, it seems exaggerated for non-dealer use Xentry Tab. While for dealers, that is necessary.

And what about workshop service?

Undoubtedly, the tablet from Panasonic is well while the price is too high. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.

So , we suggest to buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .

After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.

Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Real MB star C5 price:

As for the price, real MB Star C5 will be sale 1095 EURO in www.obd2tool.com without shipping cost. The price is about 2 times higher than the old C5.

2017 Newest version for mb star c5 with Super Engineering Software DTS monaco And Vediamo

Posted on April 5, 2017 by wp-admin

MB star c5 newest software version is 2017.03 now . the mb strar c5 diagnostic tool support Benz cars, trucks, bus, passenger car and more.

mb stra c5 Super engineer software DTSmonaco it can achieve separate programming, scan entire vehicle software code, read entire vehicle setting code data, It truly one-button operation, Keep entire vehicle data

mb star c5 scanner tool support function as following:

1.unit for off-line programming

2.a key to off-set code

3.W166, cancel the programmed number of calculation method of urea, one perfect canceled all 166 urea system.

The new c s-series to the factory installed conversion:

4.222, 205 installing fragrance systems

5.2015, paragraph 212, changing traffic light permanently lit

6.212, 204, adding electric ear

7.222 205 HU5 traffic solution for DVD video

8.W164 closed recycling system

9.W205, retro atmosphere lamp

10.205, 222 adding electric ear electric trunk, the trunk kicking function

11.166, how to modify the gateway set up codes

12.166 meters finished degrees Fahrenheit to degrees Celsius

13.US standard maintenance mileage be set to the number of miles

14.164 disabled diesel particle filter regeneration system

15.166 canceled urea

16.205 added electric rear vision mirror

17.HU45 regional Chinese resolve lock

18.W204 W166 foldable rear-view mirror

19.change the 166 on board, display in Celsius

20.W212 disable ECO configurations

21.activate the HOLD function ABR2XT

22.open W22 looked up appears

23.the AMG sports package enabled W212

24.the air bag computer reset factory State W166

25.to increase the brightness of the color instrument cluster s W222

26.22.97g to install the steering wheel shift paddles

27.W221 AMG W216 dashboard style

28.airbag ECU unlock W204 212

29.disabled child seat recognition sensors W221

30.opening rear fog lamps as spare brake lights with W222

31.increasing engine power MED177

Can SKP900 program used smart keys

Posted on September 27, 2016 by wp-admin

Following is the FAQ of SKP900 programmer concluded by OBD2TOOL.

Q: Can SKP900 program used smart keys?
A: Generally please use brand new keys, but if you can erase the chip of the used smart key completely, our SKP900 can be able to program it too.

Q: how I get more tokens?
A: SuperOBD SKP900 is with 50 tokens, after you use up, you can go to the SKP-900 official website to get more. It is for free.

Q: this skp-900 CAN read pin code?
A: yes, SKP-900 can read pin code for many vehicles.

Q: what year this skp-900 cover?
A: skp-900 can do both old and new cars. year after 2006 is better.

Q: skp-900 supports all car key lost?
A: skp-900 supports all car key lost of some cars

Q: SKP-900 can program TOYOTA G CHIP?
A: yes, SKP-900 can program TOYOTA G CHIP.

Q: How to solve the no connection problem of SKP-900 ?
A: Please open your main unit,check this chips,maybe this chips pins is loose.

Professional Diagnostic Tools Mercedes Benz C5 Xentry Connect diagnostic interface, produced by French ACTIA Company and equipped with Panasonic Xentry-Tab, can test Engine / Transmission / air conditioning /SRS/ABS/ anti-theft system and OBD-II system.

MB Star C5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.

BENZ C5 SD Connect Diagnostic Tool Feature:
Efficient diagnostic program and complete vehicle database
Simple and easy-to-use user interface (UI)
High-performance Tab with 4G memory and 13.3 inch LCD touch screen
Advanced upgraded VCI+ communication inter
Support Wired/ wireless connection
Cover all new Mercedes Benz models.

How to program Infiniti Q70L smart key via SuperOBD SKP900?

Posted on September 26, 2016 by wp-admin

This blog will guide you how to program 2013 Infiniti Q70L new smart key by using SuperOBD SKP900 Key Programmer and OBDSTAR F102 Nissan Infiniti pin code reader. Very easy steps for you!

Step1. Start SKP-900 Key Programmer. Choose “Immobilizer”→ “Infiniti” → “Smart Key” → “Q70L Smart Key 2013”. Then press “Yes” button it will show “Loading”.
Step2. Choose “Keyless System” → “Choose OBDII adapter?” press “Yes” button.
Step3. Choose “Active Steering Lock” →press “Yes” button→ press “Yes” button.
Step4. Here you need OBDSTAR F102 Nissan/Infiniti Automatic Pin Code Reader to get pin code. It’s easy to use. Then enter the Pin Code. After input it will show “Active Success”.
Step5. Back to the “Function Selection” menu and choose “2013 Infiniti Q70L”, then press “Yes” button.
Put the smart key back near to the ignition and turn on ignition, then press “Yes” button. It will show “Adapt Success”, then press “No” button.
Step6. Put the smart key back near to the ignition and press the ignition button for two times, then press “No” button.
Now you successfully make a new smart key for Infiniti by using SuperOBD SKP900 and OBDSTAR F102.

How about Mercedes BENZ C5 CONNECT software?
Besides the software Mb Star C3 and MB Star C4 own,it added three more software: SD Media, Xentry and Smart TAN Code.
SD Media: Video and PDF lessons;
Xentry:New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.

What’s the requirement of STAR C5 hardware and software ?
Software requires at least Intel Celeron/Pentium 2.0GHz, 2G RAM, USB 2.0
recommended and Microsoft Windows 2000/XP/Vista/7 latest service pack installed.

see more car diagnostic tools click www.obd2tool.com