Differences between AURO OtoSys IM100 and OtoSys IM600

The main difference lies in Mercedes-Benz, VW, Audi software and adapters to work with.

Auro OtoSys IM600 price is: 3450USD/unit with free shipping.

Software difference:
Auro IM600 canread PIN/CS from AUDI Q5/A4/A5 2015-2017 and learn keys to Mercedes-Benz, but IM100 cannot work with Mercedes-Benz, VW, Audi for immobilizer functions.

Adapter difference:
IM600 use UP400. IM100 use UP200.
Up200 doesn’t allow for eeprom and use of breakout leads through the custom pinouts.

Edit to update: Key Programming Tool IM100 is confirmed to have luck with Mercedes-Benz immo.

Now Otosys IM100 with UP400 can work for Mercedes key programming as well as Otosys IM600 does.

Immobilizer functions: OtoSys IM100 vs IM600:

22-1

Note: 22-01 This function is supported.

22-02 This function is not supported.

Special Declaration:

Some of the listed functions are manufacture dependent. The functions and vehicle coverage expand with new update release.

22-2 22-3 22-4

Lonsdor JLR-IMMO Car List Immo & Dash

Lonsdor JLR-IMMO auto key programmer for Jaguar and Land Rover

can OBD program new keys or change km for the newest Jaguar, Land Rover after 2016, some Land Rover 2018.

14-1

Lonsdor JLR-IMMO:

key program

odometer correction

14-2

Lonsdor JLR-IMMO Land Rover:

(1) Land Rover 2008-: Immobilizer and smart key

(2) Land Rover Discovery3: Immobilizer

(3) Land Rover Freelander: Immobilizer and smart key

(4) Land Rover Freelander2: Immobilizer and smart key

(5) Land Rover Discovery4: smart key

(6) Land Rover Evoque: smart key

(7) Land Rover Defender: remote

(8) Land Rover new models KVM case’s software version: FK72

(9) Land Rover new models KVM case’s software version: HPLA

14-3
14-4

14-5

14-6

14-7

14-8

Lonsdor JLR-IMMO Jaguar:

(1) Jaguar XF: smart key

(2) Jaguar SJ: smart key

(3) Jaguar F-TYPE: smart key

(4) Jaguar X-TYPE: Immobilizer

(5) Jaguar Sovereign: Immobilizer

(6) Jaguar XJ6: Immobilizer

(7) Jaguar XJ8: Immobilizer

(8) Jaguar XJR: Immobilizer

(9) Jaguar XK: remote

(10) Jaguar XKR: remote

(11) Jaguar new models KVM case’s software version: FK72

(12) Jaguar new models KVM case’s software version: HPLA

14-10
14-9
14-11
14-12
14-13

IMPORTANT: JLR-IMMO add KVM and BCM

KVM&BCM

KVM : FK72-14C104-BF

BCM : BJ32-14C184-AC

KVM : DPLA-14c104-CA (without reflash, working directly without degrade or upgrade)

KVM:

DPLA-14C104-C NEW

FK72-14C104-BA NEW

FK72-14C104-BB NEW

FK72-14C104-BC NEW

FK72-14C104-BD NEW

FK72-14C104-BE NEW

FK72-14C104-BF NEW

BH42-14C184-AA NEW

FK72-14C104-AF

FK72-14C104-AH

BCM:

DPLA-14C184-AM NEW

BJ32-14C184-AC NEW

CPLA-14C184-AE NEW

CPLA-14C184-AF NEW

GX73-14C184-AJ

GX73-14C184-AK

GX73-14C256-AH

Note that VPW protocols of Jaguar’s old model is unsupported

How to program Audi Q3 2013 key with Lonsdor K518ISE

Audi Q3 2013 key to program with Lonsdor K518ISE Key Programmer in step by step.

The car model

22-1

The key

22-2

Capabilities:

1.  backup car EPROM data;
2.  Restore EPROM: copy the backed up EPROM data onto the car computer,to restore it to the original state;
3.  Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;
4.  Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;
5.  Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;
6.  Delete key: delete the programmed key;
7.  Reset dashboard
8.  Odometer adjustment: to correct mileage;

Note:

1.  During all the system operation, the dashboard will be in the extinguished state, that is normal;
2.  Delete key process:

Step 1. Read immo data; Step 2. Select an existing key; Step 3. Write back immo data.

Car & key info:
Chip model: Dedicated 48 chip
Remote type: 220G 315 frequency
Key embryo no.: No.31
PIN code requirement: Backup EPROM data
Remote generation: Program smart key complete, remote will automatically generated.
OBD position: Under the steering wheel:

22-3

Procedure:

Backup EPROM
1.  This function can read the device EPROM data and save in Key Programmer K518ISE;
2.  For smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3.  The system read out the part number, now is going through security certification, and loading external code;
4.  Getting system data, it takes about 2 min, please be patient;
5.  Read the vehicle PIN code and other info;
6.  Please enter the file name to be saved;
7.  EPROM data is saved.

Restore EPROM
1.  Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via K518ISE;
2.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3.  The system read out the part number, now is going through security certification, and loading external code;
4.  Please confirm the current data is the car EPROM data;
5.  Writing EPROM data, about 2 minutes, please be patient;
6.  Resetting the dashboard, EPROM data is restored.

Make dealer key
1.  This function can generate a dealer key to be programmed, then use this key to perform “Add key” operation;
2.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3.  The system read out the part number, now is going through security certification, and loading external code;
4.  Getting system data, it takes about 2 min, please be patient;
5.  Please choose to vehicle brand;
6.  Please insert the blank key to be programmed into the K518ISE card slot;
7.  Make dealer key success.

Add key (OBD)
1.  This system is suitable for directly programming smart card dealer key.Directly add key(suitable for folding dealer key directly programming)
2.  This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;
3.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
4.  The system read out the part number, now is going through security certification, and loading external code;
5.  Getting system data, it takes about 2 min, please be patient;
6.  Writing immodata, about 2 minutes, please be patient;
7.  Add key complete.

Delete key
1.  This function can delete an existing key;
2.  The process of this function:
Step 1. Read anti-theft data Step 2. Select an existed key Step 3. Write back immodata;
3.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
4.  The system read out the part number, now is going through security certification, and loading external code;
5.  Getting system data, it takes about 2 min, please be patient;
6.  Please select the key to be deleted;
7.  System communicating, delete complete.

Reset dashboard
1.  Establishing communication, the system is resetting the dashboard;
2.  Reset complete.

Odometer adjustment
1.  This process can read and calibrate the odometer mileage;
1.  if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;
3.  Read the current mileage;
4.  Going through security certification and loading external code, getting data, it takes about 2 minutes;
5.  Please enter the new mileage needed to be calibrated ;
6.  During writing… write complete.

Lonsdor K518ISE not access to any testable car model solution

If the Lonsdor K518ISE can’t access to any testable car model, the OBD cable should be the main reason after testing again and again by the Lonsdor engineer.

Here is the method to test the OBD cable (Verified working great):

1.Unplug the K518ISE main unit and turn it off

17-1

2.Connect the DB25 cable(OBD cable) to Auto Key Programmer k518ISE main unitusing amultimeter and switch to the diode stalls.

17-2
17-3

Note: there are 3 connectors on the OBD cable:

Connector 1: connect K518ISE OBD port;

Connector 2: connect KPROG adaptor

Connector 3: connect the vehicle OBD port

17-4

Pic: 3 connectors on OBD cable

3. Use the red pen to touch the metal part(as shown in pic 2 in red)

17-5

Pic: Metal part on K518ISE OBD port

17-6

4. Use the black pen to test the resistance of each pin of the vehicle connector (As shown in pic 3) , make sure that you hold the vehicle connector in the way just as the pic shows:

17-7

Pic : 16 pins on the vehicle OBD connector

17-8

PIN 1 and 8 should have no resistance; PIN2,3,4,5,6,7,9,10,11,12,13,14,15,16 should have resistance.

If all pins have no resistance, the problem should be the DB25 cable.

If all pins are tested ok but the machine still can’t access to any supported car model, then you can ship back the machine, adapters and DB25 cable for testing.

www.obd2tool.com