Lonsdor k518ise feedback

Lonsdor K518ISE Key Programmer feedback 2018/12/5

Mitsubishi space wagon 2003, precoded id61 and programmed key ok.

Corsa E (2016) read PIN (BCM) = OK

VW Amarok 2016 add key ok and backup eeprom

FIAT 500 2008 Read Pin code and preapre remtote key than program. ALL FINE

I have start loving this toy when i bought this Auto Key Programmer was working 20% ok 80% not Now it is 95 – 5. Today megane 3 year 2009 keyless key made job in 2minutes

Porche Panamera 2010 km adjust obd job done

hyunday i20 2015 year
read pin ok
add key ok

Citro  c5 2008 read pin add key ok
307 Kline read pin fail / add key ok

206 kline all key lost read pin ok about 3sec
opel Zafira b read pin add key
Touran 2006 learn key and remote ok

Zafira B, read pin and add key, – Success (note, this failed under Zafira B in menu, but i chose type 3 from by system for both pin read and program and works fine)

Peugeot 607 2006 abrites won’t connect with BSI to read pin and key learning too .
Lonsdor read pin and program key 2 min .

Renault Fluence 2015 keyless go works excelent,in fact,zed full asks for pin and Lonsdor doesn’t.The key works ok in central module and keyless go,5 min job.

Suzuki Swift 2015-> (pcf7961)
all key lost
Program without pin – OK (2min)

ford focus 2006 year
add key (all key lost) work all ok

How to use VAG OBD helper to read out 4th IMMO data / MQB data?

1.What is VAG OBD Assistant Function? Why do you need a VAG OBD Assistant? Where to get VAG OBD Assistant?
2.How to use VAG OBD helper to read out 4th IMMO data / MQB data?
3.How to use Lonsdor K518ISE to program key with the IMMO data?

1.What is VAG OBD Assistant Function? Why do you need a VAG OBD Assistant? Where to get VAG OBD Assistant?

Vw, Audi, Skoda and other 4th generations of anti-theft system of the cars , in the situation of needing add key or the situation key all lost, the current market equipment can not read anti-theft data (such as Xhorse VVDI2, AVD,I AP PRO, Lonsdor K518ise and other equipment), or need to disassemble the dashboard to get anti-theft data. The steps is complex and risky, and it takes a long time.Now you only need to use VAG OBD assistants, connect to the vehicle and connect to the network to get the anti-theft data of the vehicle in about 3-5 minutes (depending on the network situation, or the number of users to determine the length of time)

After online access to anti-theft data, the system will automatically save the documents according to the frame number in the VAG OBD document directory, generated files, support the use of current popular equipment, can directly generate dealer keys, and learn key data.

For vehicles with MQB anti-theft system, this device can also be used if the anti-theft data cannot be read directly, but it can only be used to add keys. (for example, add the key of Johnson dashboard).A4L Q5 can not read BCM2 data directly, showing data length error, you can use this design to calculate BCM2 data.The 14-year A6 A7 A8 Touareg hui ang 5-generation anti-theft system can not obtain BCM2 data when all the keys are lost. It can also be used to calculate BCM2 data online, and then match the keys with VVDI2 APPRO and other equipment.

Note: The premise of using this equipment is that the vehicle can not be tampered with information, the vehicle state is legal. If the information is tampered with, then the data can not be calculated.

2.How to use VAG OBD helper to read out 4th IMMO data / MQB data?

1.Hook VAG OBD helper up the vehicle.

vag-obd-helper-01

2.Click on “Read car info” to get manufacture, VIN, immo type, power, key count, key ID etc.

vag-obd-helper-02

3.Enable the network connection and upload data to calculate.
The system is reading ECU type.
Click on “Online calculate immo data”.

vag-obd-helper-03
vag-obd-helper-04

4.Online calculate immo data successfully and saved automatically, click on “Yes”.

3.How to use Lonsdor K518ISE to program key with the IMMO data?

1.Connect Lonsdor K518ISE and computer using one USB cable, open “My Computer”, click on the portable device “K518”.

2.Click on “Memory Device”.
Lonsdor-K518ISE-immo-data-01

3.Rick click to open the folder “Customfile”, copy the VAG 4th IMMO data or MQB IMMO data, paste it into this folder.

Lonsdor-K518ISE-immo-data-02

4.Enter Automotive key Programmer K518 function menu, select “Immobilizer”, then ” 4th IMMO”.

Lonsdor-K518ISE-immo-data-03

5.Select “4th engineering mode”.

Lonsdor-K518ISE-immo-data-05

6.Select “Generate dealer key”.

Lonsdor-K518ISE-immo-data-06

7.Select “Yes” to ensure the immo data(bin file) is put into the customfile folder of k518.

Lonsdor-K518ISE-immo-data-07

Lonsdor JLR-IMMO Car List Immo & Dash

Lonsdor JLR-IMMO auto key programmer for Jaguar and Land Rover

can OBD program new keys or change km for the newest Jaguar, Land Rover after 2016, some Land Rover 2018.

14-1

Lonsdor JLR-IMMO:

key program

odometer correction

14-2

Lonsdor JLR-IMMO Land Rover:

(1) Land Rover 2008-: Immobilizer and smart key

(2) Land Rover Discovery3: Immobilizer

(3) Land Rover Freelander: Immobilizer and smart key

(4) Land Rover Freelander2: Immobilizer and smart key

(5) Land Rover Discovery4: smart key

(6) Land Rover Evoque: smart key

(7) Land Rover Defender: remote

(8) Land Rover new models KVM case’s software version: FK72

(9) Land Rover new models KVM case’s software version: HPLA

14-3
14-4

14-5

14-6

14-7

14-8

Lonsdor JLR-IMMO Jaguar:

(1) Jaguar XF: smart key

(2) Jaguar SJ: smart key

(3) Jaguar F-TYPE: smart key

(4) Jaguar X-TYPE: Immobilizer

(5) Jaguar Sovereign: Immobilizer

(6) Jaguar XJ6: Immobilizer

(7) Jaguar XJ8: Immobilizer

(8) Jaguar XJR: Immobilizer

(9) Jaguar XK: remote

(10) Jaguar XKR: remote

(11) Jaguar new models KVM case’s software version: FK72

(12) Jaguar new models KVM case’s software version: HPLA

14-10
14-9
14-11
14-12
14-13

IMPORTANT: JLR-IMMO add KVM and BCM

KVM&BCM

KVM : FK72-14C104-BF

BCM : BJ32-14C184-AC

KVM : DPLA-14c104-CA (without reflash, working directly without degrade or upgrade)

KVM:

DPLA-14C104-C NEW

FK72-14C104-BA NEW

FK72-14C104-BB NEW

FK72-14C104-BC NEW

FK72-14C104-BD NEW

FK72-14C104-BE NEW

FK72-14C104-BF NEW

BH42-14C184-AA NEW

FK72-14C104-AF

FK72-14C104-AH

BCM:

DPLA-14C184-AM NEW

BJ32-14C184-AC NEW

CPLA-14C184-AE NEW

CPLA-14C184-AF NEW

GX73-14C184-AJ

GX73-14C184-AK

GX73-14C256-AH

Note that VPW protocols of Jaguar’s old model is unsupported

How to program Audi Q3 2013 key with Lonsdor K518ISE

Audi Q3 2013 key to program with Lonsdor K518ISE Key Programmer in step by step.

The car model

22-1

The key

22-2

Capabilities:

1.  backup car EPROM data;
2.  Restore EPROM: copy the backed up EPROM data onto the car computer,to restore it to the original state;
3.  Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;
4.  Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;
5.  Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;
6.  Delete key: delete the programmed key;
7.  Reset dashboard
8.  Odometer adjustment: to correct mileage;

Note:

1.  During all the system operation, the dashboard will be in the extinguished state, that is normal;
2.  Delete key process:

Step 1. Read immo data; Step 2. Select an existing key; Step 3. Write back immo data.

Car & key info:
Chip model: Dedicated 48 chip
Remote type: 220G 315 frequency
Key embryo no.: No.31
PIN code requirement: Backup EPROM data
Remote generation: Program smart key complete, remote will automatically generated.
OBD position: Under the steering wheel:

22-3

Procedure:

Backup EPROM
1.  This function can read the device EPROM data and save in Key Programmer K518ISE;
2.  For smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3.  The system read out the part number, now is going through security certification, and loading external code;
4.  Getting system data, it takes about 2 min, please be patient;
5.  Read the vehicle PIN code and other info;
6.  Please enter the file name to be saved;
7.  EPROM data is saved.

Restore EPROM
1.  Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via K518ISE;
2.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3.  The system read out the part number, now is going through security certification, and loading external code;
4.  Please confirm the current data is the car EPROM data;
5.  Writing EPROM data, about 2 minutes, please be patient;
6.  Resetting the dashboard, EPROM data is restored.

Make dealer key
1.  This function can generate a dealer key to be programmed, then use this key to perform “Add key” operation;
2.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3.  The system read out the part number, now is going through security certification, and loading external code;
4.  Getting system data, it takes about 2 min, please be patient;
5.  Please choose to vehicle brand;
6.  Please insert the blank key to be programmed into the K518ISE card slot;
7.  Make dealer key success.

Add key (OBD)
1.  This system is suitable for directly programming smart card dealer key.Directly add key(suitable for folding dealer key directly programming)
2.  This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;
3.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
4.  The system read out the part number, now is going through security certification, and loading external code;
5.  Getting system data, it takes about 2 min, please be patient;
6.  Writing immodata, about 2 minutes, please be patient;
7.  Add key complete.

Delete key
1.  This function can delete an existing key;
2.  The process of this function:
Step 1. Read anti-theft data Step 2. Select an existed key Step 3. Write back immodata;
3.  For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
4.  The system read out the part number, now is going through security certification, and loading external code;
5.  Getting system data, it takes about 2 min, please be patient;
6.  Please select the key to be deleted;
7.  System communicating, delete complete.

Reset dashboard
1.  Establishing communication, the system is resetting the dashboard;
2.  Reset complete.

Odometer adjustment
1.  This process can read and calibrate the odometer mileage;
1.  if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;
3.  Read the current mileage;
4.  Going through security certification and loading external code, getting data, it takes about 2 minutes;
5.  Please enter the new mileage needed to be calibrated ;
6.  During writing… write complete.

Lonsdor K518ISE not access to any testable car model solution

If the Lonsdor K518ISE can’t access to any testable car model, the OBD cable should be the main reason after testing again and again by the Lonsdor engineer.

Here is the method to test the OBD cable (Verified working great):

1.Unplug the K518ISE main unit and turn it off

17-1

2.Connect the DB25 cable(OBD cable) to Auto Key Programmer k518ISE main unitusing amultimeter and switch to the diode stalls.

17-2
17-3

Note: there are 3 connectors on the OBD cable:

Connector 1: connect K518ISE OBD port;

Connector 2: connect KPROG adaptor

Connector 3: connect the vehicle OBD port

17-4

Pic: 3 connectors on OBD cable

3. Use the red pen to touch the metal part(as shown in pic 2 in red)

17-5

Pic: Metal part on K518ISE OBD port

17-6

4. Use the black pen to test the resistance of each pin of the vehicle connector (As shown in pic 3) , make sure that you hold the vehicle connector in the way just as the pic shows:

17-7

Pic : 16 pins on the vehicle OBD connector

17-8

PIN 1 and 8 should have no resistance; PIN2,3,4,5,6,7,9,10,11,12,13,14,15,16 should have resistance.

If all pins have no resistance, the problem should be the DB25 cable.

If all pins are tested ok but the machine still can’t access to any supported car model, then you can ship back the machine, adapters and DB25 cable for testing.

www.obd2tool.com

Lonsdor K518 Program Kia KX3 2013 All Smart Keys Lost

Guide to read pin code and program smart key on a  Kia KX3 year 2013 when all keys have lost by using Lonsdor K518ISE key programmer.

Key info.:

Original key: 3-button smart key

Chip: 47 Chip

Start: One button start-stop

Card slot: No

Pin code reading: by OBD

Device to program: Lonsdor K518 car key programmer

Guide:

Step 1: Read 47 Pin Code

Connect K518 host with vehicle via OBD diagnostic socket

Select Kia->Read Pin Code->Read Pin Code (47 smart card)

17-1

17-2

17-3

17-4

Turn ignition switch to ON position

Open and close driver door for once

17-5

Press on Start button. Open and close driver door once

17-6

Communicating…

K518ISE key programmer read Kia KX3 47 pin code success

Write down the pin code

17-7

Step 2: Program Smart Key

Select KX3->Type 1->Program Smart Key->Program Smart Card

17-817-917-10

All smart keys need to be programmed, otherwise cannot start vehicle.

Turn ignition off. Open and close driver door once.

Auto Key Programmer Lonsdor K518ISE will require to enter 6-digit pin code read from Step 1

17-11

Press YES to continue

Prepare smart key to be programmed, stick the smart key to Start button within 5 sec until immo indicator flashes

Programming

Program success. Press YES to program next key, NO to go back.

Test the new smart key.