CGDI Prog BMW adapts F35 N20 ECU Donor via OBD

CGDI Prog BMW adds  “BMW data Modify” function which is used for adapt the ecu donor. Its simple to do.

cgdi-bmw-data-modify-1

Engine Model example: BMW F35 N20 engine

Procedure:

1.Read EEPROM Data in engine ECU with CGDI BMW or CG Pro 9S12 programmer

N20 engine physical wiring connection to CG Pro/CGDI BMW

cgdi-bmw-data-modify-2

cgdi-bmw-data-modify-3

Read and save enginee EEPROM data

2. Go to CGDI BMW software

Select BMW data modify function

cgdi-bmw-data-modify-4

cgdi-bmw-data-modify-5

Choose engine Type: N20 and Load Data read by CG Pro

cgdi-bmw-data-modify-6

3. Manualy enter the VIN and ISN you want and save the new data.

cgdi-bmw-data-modify-7

cgdi-bmw-data-modify-8
4. Write the new generated data to the engine with Key Programmer CG100 or CGPRO.

CGDI Prog Key Programmer read BMW CAS3 ISN by OBD

Here is the easy steps to read BMW CAS3 ISN by using CGDI Prog BMW MSV80 key programmer via OBD.

16-1

Connect CGDI Prog key programmer with laptop and vehicle from obd2tool.com

16-2
Open key programming tool CGDI Prog software on desktop

Select BMW Read DME ISN function

16-3

16-4
Click on Read CAS ISN

16-5

Reading data

Please remove the key from the ignition

16-6

The CAS ISN data was read successfully.

Related article:

How to use CGDI Prog to Program BMW CAS3 key by OBD

CGDI BMW FEM BDC key learn in the dismantling method

CGDI Prog BMW MSV80 Car Key Programmer is in the dismantling method instead of OBD method. Then you have to know the FEM/BDC system location, 95128 IC location, 95256 IC location and Key learning position, read the detail in the below parts.

1.BMW FEM/ BDC installation location.

CGDI BMW-1

2.95128 IC location

CGDI BMW-1

3.95256 IC location

CGDI BMW-1

4.Key learning position

CGDI BMW-1

That’s all.