wiTECH Bandwidth Requirements

DESCRIPTION:

*   Reliable Internet connection speed and consistency are essential for the wiTECH System to complete flashes.
*   It is recommended that the communication speed of your Internet connection be a minimum of 1.5Mb/sec (Megabits per second) for the 1st witech Micropod 2 Client.
*   Each additional wiTECH Client should have 1.5Mb/sec. of additional available bandwidth.  Of course, the better the connection is, the faster the flash files will download before the flashing will commence.

ABOUT CONNECTION SPEED

*   Most Internet Service Providers (ISPs) advertise their Internet connection speeds in Mb/s or Mbps (Megabits per second).
*   However, when testing your Internet connection, sometimes the results are displayed as MB/s (note the capital B) which means Megabytes per second.
*   There is a big difference between the lowercase b and the uppercase B. If the results are displayed as MB/s then the number has to be multiplied by 8 in order to obtain the speed results in Mbps:

For example, if the speed test resulted in a speed of 1.5MB/s (note the capital B), then we would calculate Megabits as follows:

1.5 x 8 = 12

By this calculation, the Internet connection speed is 12Mbps (12 Megabits per second).

TESTING YOUR CONNECTION SPEED

*   Two popular speed test websites are www.speakeasy.net/speedtest and www.speedtest.net.
*   *   Both websites already display the results in Mbps (Megabits per second).
*   As resources on the network are used, bandwidth availability can be reduced. Therefore we recommend performing a network speed test from multiple machines simultaneously to capture true network speed.

Speedtest.net:

*   Speedtest.net automatically chooses the test location for you; all you have to do is click on the Begin Test button in the middle of the site.
*   The results will be displayed once the test is completed.

Speakeasy.net

*   The Speakeasy.net speed test lets the user chose the target location of the test.
*   *   We recommend that you choose the target server that is closest to your dealership.
*   After choosing a location the speed test will automatically begin and results will be displayed once completed.

PIWIS Tester II is fully operational diagnostic equipment

Porsche Piwis Tester 2 is fully operational diagnostic equipment based on PIWIS vehicle interface and Porsche software. PIWIS II provides exclusive support for Panamera, Cayenne 92A, and all 2011 model range and above also provides legacy support for older models.
7-1

PIWIS II main functions
* General ECU diagnostics (DTC read/clear)
* Guided fault finding
* ECU programming/coding
* Real-time control parameters display
* Electrical schematics mapping

7-2

One year limited warranty and free update, registration support

PIWIS Tester II advantages
* Exclusive support for 2011 model range and above (Panamera,Cayenne 92A)
* Fast and stable connection
* Simulation mode (diagnostic session without VCI connection)
* End user capable DVD update
* Wired USB connection or wireless Wi-Fi connection

7-3

PIWIS Tester II equipment set includes
* Panasonic CF30 or CF31 notebook
* PIWIS II adapter (with Wi-Fi module)
* OBD and USB cables
* Laptop power adapter
* Preinstalled software

7-4

To purchase the equipment, as well as consulting, maintenance,please contact us:
Url: https://www.obd2tool.com
Email: sales@obd2tool.com

Why do you need have VCM II firmware recovery?

Why do you need have VCM II firmware recovery?

You Chinese clone that after flashing says beep every second …
or firmware in the clone for IDS84 program , and you want the software to IDS86 …
or you have violated the data on the memory card or memory card is broken …

2-1

Is it safe to do Ford VCM II recovery?

Not really. ALL can be done AT YOUR SOLE RISK . You’d better SAVE YOUR OLD MEMORY CARD .
2-2

How to do VCM II recovery?

Install a clean copy of the operating system, this system must not be connected VCM2
2. Install the drivers for all devices and update system
3. Download files from the links below
4. Disable updates Disable Firewall, Disable Web
5. Set the date on your computer September 1, 2013, and disable time synchronization via the Internet.
6. Set IDSv86 on your system.
7. reboot
8. kill the following processes if they are running:
CodeServeD.exe
DetectionManager.exe
EngineeringFeedback.exe
FNPLicesingService.exe
ISUSPM.exe
ProbeTickHander
Starburst.exe
SysPage.exe
TDSNetConfig.exe
TDSNetSetup.exe
Tabman.exe
testman.exe
wuauclt.exe
XMLRegistryD.exe
9. This item is optional.
unzip the boot.zip and put it in the folder “C: \ Program Files \ ford motor company \ IDS \ system”
that is, the full name of the folder should be “C: \ Program Files \ ford motor company \ IDS \ system \ boot”10. Apply the patch from attachments. Up to this point NOT connect device VCM2. 2nd item when using the patch (for VCM 2).
11. Reboot
12. WARNING! your device VCM2 must not connected wires.
13. Remove the side cover from VCM2 with the side where drawn Wifi, install the card 4 or 8GB depending on what was installed in your device. Commonly usedclass 4 cards
14. Press the plastic button (to the quiet click) but not much, because the Chinese are very fond of buttons to break.
15. connect the +12 v supply through connector. (Continue to hold the button)
16. Wait a few seconds, the red light, but you must continue to hold the button. When a beep sounds immediately release the button.17. Wait about two minutes (visually nothing will happen), connect the USB cord from VCM2 to computer.
18. Start Bosh VCI MANAGER. Once connected, you will see your VCM2 in recovery mode.
19. click on “Restore” button and go to drink coffee, it takes about 40 minutes.
20. after flashing VCM2 automatically reboot. (If, after repeated firmware situation BEEP 1 second, you can try to do firmware lower software version number,

eg 84 or 85)
21. Wait 2 minutes.
22. unplug all cables from VCM2
23. Restart the computer, wait for the full load and run the IDS86 (VCM2 not connected). on offer data entry, enter the dealer Ford / Mercury / Lincoln,

dealer code UR097, country Russia
24. Wait until the start IDS86 and connect the device.
25. system will install the drivers and communication protocols VCM2

Everything should work!

p.s. If you broke the paragraph 14 of the button to close the tweezers solder contacts or temporarily remote button on the wires.

If this does not help, follow instructions at the end of all the action as follows:
26. Reboot
27. Press the reset button, plug in the +12v to VCM 2, wait for beep, release the reset button
28. Start IDS86 and wait until the boot
29. Connect VCM2 USB cable to the computer program IDSv86 should offer to update the firmware of the device.
30. Update the device.
31. after flashing VCM2 automatically reboot. (If, after repeated firmware situation BEEP 1 second, you can try to do firmware lower software version number,

eg 84 or 85)
32. Wait 2 minutes.
33. unplug all cables from Professional Diagnostic Tool VCM2
Now exactly Everything should work!

Which Tool is Best for Truck Diagnostic & Programming

Have search info for a few days ago because I want to learn about how to set myself up with Truck Diagnostic Tool/programming software and the proper tools to do my own work.

Topic: Looking for a good truck performance programmer

Purpose:
I want to be able to read codes on our trucks, address check engine lights, abd lights and whatever else.

Changing parameters would also be nice to do.

Truck:

We have 5 trucks. 3 of mine all have series 60. From ddec 2 up to ddec 4. He has an isx and an Acert. Our trucks are kenworth, Peterbilt and a intl 9200. Would also like cab side on those.

Budget:

I think a $4-500 one should fit the bill.

(Am I able to find everything I need rather than paying some company $4-5k for a tough book and some programming?)

Diagnostic tools looking for trucks:

I have seen a nexiq also the new NEXIQ USB Link 2 and a drewlinq. I think they all serve the same purpose?

Recommendation for hookup: (credits to Samsquantch84)

Laptop: You can pick up a used Lenovo T410 on the web for like $200. They are durable laptops not the best battery life. but get one that has an i5 processor. They are more than fast enough. If you get a laptop that is a little under powered it makes the programs run slow which is really annoying for doing diagnostics. They are pretty rugged laptops.

Equipment: Definitely the best solution is to buy an authentic Nexiq usb link one or two. But if within your budget, a good Nexiq clone of high quality (now called VXTRUCK) should be OK. It’s $200 around. I have to tell you, you need have luck with Chine clone coz you may have nothing but issues with the clone. Go to a good man of his word to trust.

The only real difference between the old one and the new one is the two is that the usb link two supports newer vehicles like ghg17. You probably won’t need it.

Also be careful buying one online unless it is a reputable source. There are some really good looking clones available that are deceiving. obd2tool.com is a supplier of the HQ NEXIQ USB Link and has great support so that is the only source I recommend. I have used it to program a new chip. Success.

22-1 22-2 22-3
Software: As far as software goes. Find Detroit DDDL, Cat ET 2017, Cummins insite 8.1 and you should be good to go. All are easy to get for free from forums or other place.  Also, have a try with crack versions tested by professionals. If you start getting into new Pete’s or kenworth’s like 2012’s(my date’s might be alittle off) and up paccar esa might be handy as well. It connects to the body controller side and allows you to control things like if you install led headlights in a truck that had incandescent you have to change a setting in the cecu for it to work. Also keep learning. There is so much help and information available on this forum from some of the right people. you will learn who they are. Congrats on trying to better your self. and if you have any questions just ask. International uses diamond logic build for the cab side. It’s not the most user friendly software, just like their trucks, who in their right minds uses straight thread o-ring to push to connect air fittings…errrrrr. Also you can go on

quickserve.cummins.com and register for a free limited owners plan which gives you access to parts and service manuals for up to 5 engine serial numbers for free. and dependent on your peterbilt and kenworth dealers you can register with them your vin numbers to a fleet e-cat. It gives you access to look up your vin numbers and view wiring diagrams. It can come in handy.

MOPAR MicroPod II

12-0

Good things come in small packages, like Chrysler’s latest and greatest diagnostic interface. This dongle-style device is the same diagnostic and programming tool the dealerships are using. It offers 100 percent CAN coverage for Chrysler, Dodge,Jeep and Fiat vehicle platforms. It replaces your StarMobile, StarScan, and witech Micropod 2.

12-1

Includes:
MicroPod II, USB MicroPod II connector
cable, wi-TECH Application Software and carrying case.

MOPAR MicroPod II Features:
* Supports all the latest technologies and vehicle platforms including the latest Chrysler/Fiat vehicles.
* Works as a direct replacement for the wiTECH VCI pod.
* No Smart cables required.
12-2

MicroPod II + Tablet
wiTECH 2 introduces fully wireless usage of your MicroPOD II with iOS or Android tablets and phones! wiTECH 2.0 allows wireless connectivity through any device with a web browser!

12-3

MicroPOD II Remote Trigger
The MicroPod II Trigger allows the technician to use the MicroPod’s Flight Recorder capabilities. This trigger is used to start and stop recording of a customized template which is set up using the wiTECH Diagnostic Application.

12-4
wiTECH 2.0 diagnostic software is the state of the art diagnostic system for Dodge, Chrysler, Jeep and North American Fiat vehicles. Professional Diagnostic Tool wiTECH 2.0 allows fully wireless connectivity to perform diagnostics, reprogramming and security functions.

Any mobile device with a browser will run the software, including Android and iOS phones and tablets. A Mopar Tech Authority account is required, as well as a secured MicroPod II.

This tool is used for a variety of model years but is required for all vehicles utilizing CAN operations.

The list to the right shows some of the many functions of OBD2 Scanner wiTECH 2.0.

*Increased speed
*Enhanced wireless security
*Full wireless operation
*No cables required
*Enables mobile devices
*Rapid device recovery
*No PC required
*More reliable ECU reprogramming
*Automatic WiFi reconnection
*Automated Flash recovery

12-5

12-6

12-7 12-8

MB SD Connect C4 requires to update VCI

We have a customer whose MB SD Connect C4 diagnostic system runs great but suddenly require an VCI upgrade.

He rename the VCI update file, but still failed to run Star diagnostic self test (Error screenshot attached)

12-1 12-2 12-3

Solution:

Re-install mb sd c4 battery, update MB SD C4 firmware to V2.3.2.

Some users feedback that SDConnect from OBD2TOOL with serial number 101044 will take firmware update risk. If you use our DAS software without internet connection, it will work.

Porsche Piwis Tester II

27-1

Porsche Piwis Tester II Function
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Porsche Piwis Tester II Support Vehicle
911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera

Piwis tester 2 with CF30 Laptop For Porshe
1. Software Version: 18.100
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By CD or HDD (One Year for Free, It can not be updated online. 200USD for one time update after one year.) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them.
7. Support Key Programming function,cost 210USD per time ( you need consult our customer sevice first with the type and year of your car)

1st what you need to do on you GM tech 2

And so, you came to your device, and you hold it in your hands. First of all, after you have made sure that it is intact, no need to go write a review or to complete the transaction, depending on where you bought it. Unpack Tech2 Scan Tool , the first thing we need to insert it in the Tech 2 memory card, no matter what the slot. To find the power supply from the network, plug rs232, as in the photo below, and the cover on the main cable.

12-1

Now insert the plug GM 3000098 in the Tech 2 from Obd2tool.com , turn on the unit to the network and device connector is nearly blank. The first thing you will see is a POST test . Next to the menu and select tools options -> self test. Insert our rs232 plug and select Automaited test main board and VCI.

12-2
12-3
12-4

Here rs232 indicates that without our help, your GM Tech2 cannot communicate with the computer. Rs 485 nothing serious. But this is enough to Main PCB Self Test Fail. This isn’t a problem, because it is removed very simply, if errors are gone, and you still cannot connect to the computer, it is also just corrected. HBCC IGNORED’s OK too. But if mistakes will be much more, it is best to make sure you get the Tech 2 back, or you sent the new modules from him.

Next you need to test Candy , unfortunately I do not have a photo, but we havent nothing complicated, perhaps later I will make a short video like 5 minutes to test. Later I will try it’s clear to tell you how to resolve certain problems.

Профессиональный диагностический сканер Porsche PIWIS Tester II

29-1

Дилерский автосканер Porsche PIWIS II предназначен для проведения полнофункциональной диагностики автомобилей концерна Porsche ( поддерживает весь модельный ряд, в том числе Porsche Panamera и новый Porsche Cayenne до 2014 года выпуска включительно) . Включает все режимы работы от диагностики до адаптации и программирования.
Сканер поставляется в комплекте с ноутбуком Panasonic CF-30 на который установлена дилерская программа для диагностики автомобилей Porsche.

Porsche Piwis II дилерский сканер для диагностики  автомобилей Porsche. Версия 2013 года.

В отличие от предыдущей модификации Porsche Piwis, предназначенной для автомобилей до 2005 года, поддерживает все модели автомобилей. Актуализация применяемости автосканера  выполняется путем обновления программного обеспечения и кодов неисправностей.

Диагностика автомобилей Porsche Panamera осуществляется только с помощью сканера Porsche PIWIS Tester II.

Сканер может быть укомплектован ноутбуком Panasonic CF-30, оснащенным программой дилерской диагностики Porsche.

29-2

Функциональные возможности Porsche Piwis II

* Чтение, стирание кодов ошибок DTC
* Обработка потока данных PCM.
* Многоязычный интерфейс управления автосканера, включая русский.
* Запись и воспроизведение стоп-кадров изображений и технических параметров  с ЭБУ и датчиков
* Тестирование исполнительных механизмов
* Программирование иммобилайзеров
* Кодирование электронных ключей
* Интегрированная система поиска неисправностей
* База по электрическим схемам ( авто после 2005 года)

Охват тестера Профессиональный диагностический инструмент Porshe Piwis II   

* 911(997)
* Boxster/Cayman (987)
* Cayenne
* Panamera

Диагностируемое оборудование и системы

* Двигатель (ENG).
* Климат-контроль.
* Подушки безопасности (SRS).
* Антиблокировочная система (ABS).
* Антипробуксовочная система (ASR).
* Оригинальная противоугонная система.

Комплектация Porshe Piwis II

* Автосканер
* Ноутбук с установленным программным обеспечением
* USB кабель
* Блок питания
* Кабель OBD

2017 Chinese National Day and Mid-Autumn Festival Holiday Promotion

OBD2TOOL

2017 Chinese National Day and Mid-Autumn Festival Holiday Promotion

Dear customers,

To celebrate the Chinese National Day and Mid-Autumn Festival, we will have holiday from Sep 30th – Oct 08th.
If you are interesting in buy any tool, please place an order as soon as possible.
We will arrange shipping for you before our holiday.

We are sorry we can not ship the order during the holidays.  but we will send extra free Gift for each order:
1. Order under 1000USD Get VAG com V15.7
2. Order over 1000USD Get Car and truck OBD2 cdp DS150 professional Diagnostic tools
3. Order over 1500USD Get super VCS
4. Order over 2000USD Get 2014 ALLDATA 10.53 + 2015 Mitchell OnDemand

The gift can adjust according to customer demand.

In addition, we released some special products to thank the old and new customers, Click 2017 Chinese National Day promotion to see more detail.
We may not reply you or arrange the shipment during the holiday .
If you have any request or problem , please send email to sales@obd2tool.com ,  your emails can be received normally , but will be handled after we are back to work .

Sorry for the inconvenience to you & Thanks for your understanding .

OBD2TOOL Team