CK100 Key Programmer

CK100 Key Programmer is a new generation Car Key programmer, it is the upgrade version of the SBB Key Programmer, new CK100 will replace sbb Key Immobilizer. Increase much more features and functions, it is an powerful, functional and Excellent Quality Car Key programmer.

There are several version of CK-100 key programmers on obd2tool.com.

1.V45.09 CK100 Key Programmer

V45.09-CK100-Key-Programmer

1.Upgrade version of V45.06 CK-100.
2.Increase much more features and functions, such as pin code reader functions.
3.Supports some car models till 2014.09(Check detailed car list).
4. Supports multi languages: English/ Italian/ Dutch/ French/ Spanish/ Portuguese/ Turkey

CK-100 V45.09 car key programmer Pin Code Service:
1) For HYUNDAI PIN CODE
2) For KIA PIN CODE
3) For NISSAN BCM CODE
4) VAG PIN CODE SYSTEM1 (SYSTEM2,KOSTAL,MEGAMOS/DELPHI)
5) VAG 7-4 PIN CONV (PIN7,DEALER,IMPORTATORE,PIN4,DATA(00/00/2000),EXIT)
6) For GM PIN CODE ECM TYPE 1 (ECM TYPE 2,ECM TYPE 3,ECM TYPE 4,ECM TYPE 5,ECM TYPE 6
7) For CHRYSLER FOBIKCODE
8) For FORD KEYLESS ECODE (KEYLESS ENTRY CODE1,KEYLESS ENTRY CODE2)

2.V46.02 CK100 Auto key programmer

V45.09-CK100-Key-Programmer

Top 6 Reasons to Get the CK-100:
1. CK 100 Key Programmer Software Version: 46.02
2. Language: English,Italiano,Deutsch,Francais,Espaniol,Portugues,Turkish
3. It contain 1024 tokens,when use out, pls buy the SK117-S from us
4. Support Toyota G Chip
5. It is a new generation of the SBB Key Programmer, the replace version
6. Support Toyota, Honda and Ford to Year 2014

Notice:
1. Can’t Update
2. If CK100 fails to adapte key, pls disconnect OBD16 adapter and car, after 10 seconds connect again, otherwise vehicle immo system may get damaged and CK-100 will be locked too
3. Need pin code to do Ford

3.CK100 Auto Key Programmer V99.99 SBB the latest generation

CK100-Auto-Key-Programmer-V99.99

Top 5 Reasons to Get the CK-100 key programmer
1. Newest Version: V99.99
2. This CK100 is unlock
3. Support Language: English, Italian ,Dutch, French, Spanish, Portuguese, Turkish
4. Better than SBB key programmer
5. More powerfull and functional, Excellent Quality

Note:
1.Can’t Update
2. If CK100 fails to adapte key during programming, please disconnected OBD16 adapter and car, then connect again after 10 seconds, otherwise vehicle immo system may be damaged, CK-100 key programmer will be locked too.

CK100 Auto key programmer PIN CODE SERVICE:
1) HYUNDAI PIN CODE
2) KIA PIN CODE
3) NISSAN BCM CODE
4) VAG PIN CODE SYSTEM1 (SYSTEM2,KOSTAL,MEGAMOS/DELPHI)
5) VAG 7-4 PIN CONV (PIN7,DEALER,IMPORTATORE,PIN4,DATA(00/00/2000),EXIT)
6) GM PIN CODE ECM TYPE 1 (ECM TYPE 2,ECM TYPE 3,ECM TYPE 4,ECM TYPE 5,ECM TYPE 6
7) CHRYSLER FOBIKCODE
8) FORD KEYLESS ECODE (KEYLESS ENTRY CODE1,KEYLESS ENTRY CODE2)

4.2019 New CK100 Auto Key Programmer V48.88 CK-100 Car Key Programmer

V48.88-CK100-Key-Programmer

The Latest CK100 Auto Key Programmer V48.88 is the updated version of CK100 V46.2 and CK99.99,it added more car models
Language: English,Italiano,Deutsch,Francais,Espaniol,Portugues,Turkce

CK-100 Auto Key Pro Tool, Key Programmer new generation V48.88
Increase much more features and functions.
More powerfull and functional.

CK100 V48.88 Highlights :
1.Software V48.88, some car models support till 2017
2.CK100 V48.88 is new key programmer,it can support more car models than CK100 V99.99 and CK100 V46.02
3.It is a new generation of the SBB Key Programmer, the replace version
4.No Tokens Limited, The latest version of CK100 V48.88 will display 1024 tokens, it will be automatically reset when it is used up.
5.Support for Toyota G Chip.
6.Support Pin Code Reader Function for Part of Cars.

CK100 V48.88 Functions :
1. Programming new keys.
2. Reading keys from immobilizers memory
3. Deactivating keys no longer in the car owners possession
4. Operation by means of a menu guided programming
5. Programming new remote controls
6. Software with full database containing all the most important vehicle makes

How to connect CGDI MB to w164 EIS on bench

Looking for the wiring diagram that CGDI Prog MB connects to w164 EIS on bench? read this post.

Question:

my cgdi mb can’t connect to w164 EIS on bench – I have got gateway emulator but need to make proper cable for it, could You help me with wiring diagram ? – I know that aliexpress has got nice kit of cables but can’t wait a month or so for delivery.

btw.
I have got XHORSE Power ADAPTER with direct cable for W164, but it doesn’t work with CGDI – I noticed that this adapter doesn’t allow to pass power and data when connected between cgdi and w164 EIS, seems to be useless for CGDI owners for now. That’s why I decided to connect ordinary gateway emulator but need connection diagram to build a cable.

here you go for  wiring diagram that CGDI MB connects to W164

How-to-connect-CGDI-MB-to-w164-EIS-on-bench

Finally, data gathered with success!!!!

How to erase 35080vp R270 vs. VVDI Prog

Topic: 35080vp read: R270 programmer or VVDI Prog?

What’s the difference between the EPROM chips as listed:
1.35080V
2.35080VP
3.35080V6

Car year difference:
35080 and 35080v6 are different for example 35080 is in bmw until 2004 and 35080v6 is in newer bmw cars

Data erasing difference:
this eeprom has incremental area which cannot be erased by default.
ETL, xprog, upa are able to erase them by using special way.
M35080, M35080_6 can be erased by upa, xprog and a lot more programmers
On M35080V6 and D80D0WQ you need special programmes like ETL or Codiprog or machines like digiprog, enigma to erase them.
In any case incremental area has to be erased before writing.

How to choose a decent programmer for 35080vp erase:
VVDI Prog: works

review 1:
35080 VP is erase full with vvdi programmer. good luck

review 2:
R270 vp series cip eraser need 5-10 hours

vvdi normal eraser
R270: need luck
review 1: 1-2 hours
R270 OK! Sometimes 1-2 hours.

review2: no luck
Left it 3 days with no luck….
Stopped it myself

review 3: not work
R270 wont do the 35080VP but other it do fine an I do not have blank at the moment

review 4: tried twice
R270 do job very well, sometimes need try for 2 times, because reading stop

review 5: change
for change U also can use 080D0WQ eep

review 6: need pcb rework

R270 can work but the board needs rework.
1- Change the power supply to good quality: 12V 1.5A !
2- Change capacitor :
r270-pcb-rework-for-M35080vp-1
3- Change resistor:
r270-pcb-rework-for-M35080vp-2

And to make R270 Auto key programmer better on M35080, please replace the resistor R11 by 200-1K resistor.

r270-pcb-rework-for-M35080vp-3

Other programmers:
Eraser from Tacho.de work in 3 Sek

Tip: 35080 vp eeprom most equipment struggle erasing different results..
dont think 95080 will work in place of 35080 different characteristics of eeprom.

CGDI Prog BMW adapts F35 N20 ECU Donor via OBD

CGDI Prog BMW adds  “BMW data Modify” function which is used for adapt the ecu donor. Its simple to do.

cgdi-bmw-data-modify-1

Engine Model example: BMW F35 N20 engine

Procedure:

1.Read EEPROM Data in engine ECU with CGDI BMW or CG Pro 9S12 programmer

N20 engine physical wiring connection to CG Pro/CGDI BMW

cgdi-bmw-data-modify-2

cgdi-bmw-data-modify-3

Read and save enginee EEPROM data

2. Go to CGDI BMW software

Select BMW data modify function

cgdi-bmw-data-modify-4

cgdi-bmw-data-modify-5

Choose engine Type: N20 and Load Data read by CG Pro

cgdi-bmw-data-modify-6

3. Manualy enter the VIN and ISN you want and save the new data.

cgdi-bmw-data-modify-7

cgdi-bmw-data-modify-8
4. Write the new generated data to the engine with Key Programmer CG100 or CGPRO.

Step by Step Guide on Yanhua ACDP Clear BMW EGS ISN

Yanhua Mini ACDP authorize new function on BMW EGS ISN clearing.So here UOBDII want to share this step-by-step guide for you.

Related Contents:

Yanhua Mini ACDP Read BMW MSV80 DME ISN

Yanhua ACDP Mini No Need Soldering BMW DME ISN Code Support List

CGDI BMW EGS ISN Clear and Synchronize Guide

What You Need?

Yanhua ACDP Basic Moduel

Clear EGS ISN Authorization for Yanhua ACDP

EGS module

Yanhua-ACDP-Clear-BMW-EGS-ISN-1

Step 1:Build Connection between BMW EGS and Yanhua Mini ACDP Programmer.
Note:There are 3 methods,please choose according to your situation.

Connection Method 1:
Connect the 8HP end of the EGS interface board to the EGS module interface
Yanhua-ACDP-Clear-BMW-EGS-ISN-2

Note:Aim the label point of the 8HP end of the interface board with the label point of the EGS interface during installation.

Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal

Yanhua-ACDP-Clear-BMW-EGS-ISN-3

Note:Short the jumper cap to the “CAN-R-Join” end according to the marked position.
Connect the ACDP,OBP+ICP adapter,EGS interface board and EGS module

Yanhua-ACDP-Clear-BMW-EGS-ISN-4

Connection Method 2:
Connect ACDP with vehicle OBDII port

Yanhua-ACDP-Clear-BMW-EGS-ISN-5

Connection Method 3:

Connect ACDP to EGS interface according below diagram

Yanhua-ACDP-Clear-BMW-EGS-ISN-6

Step 2:Clear BMW EGS ISN

Run Yanhua ACDP software and enter the menu to select “Clear EGS ISN”
Yanhua-ACDP-Clear-BMW-EGS-ISN-7

Select “Clear ISN”,or if you have and problem please check the “Help” option

Yanhua-ACDP-Clear-BMW-EGS-ISN-8

Done!

Lonsdor K518 Smart Key Programming for Chevrolet IMPALA 2014

Here comes a guide on how to use Lonsdor K518 key programmer to perform smart key programming for Chevrolet IMPALA 2014.

Lonsdor-K518-1

Procedures:

Connect Lonsdor K518 to from OBD2TOOL vehicle and enter the immobilization menu to select “Chevrolet” brand

Lonsdor-K518-2

Select “Cruze”

Lonsdor-K518-3

Select “-2016”

Lonsdor-K518-4

Select “Smart Key”

Lonsdor-K518-5

Select “Add smart key”

Lonsdor-K518-6

Please turn on the ignition switch (do not press the brakes,hold down the start button for about 8 seconds till the dashboard is fully lit ,[OK] to continue

Lonsdor-K518-7

Lonsdor-K518-8

Insert the smart key to be programmed into the key slot,take the others out of car,the slot position generally lies in:

1.Inside the arm hand

2 .Under the cup

3.Next to the ashtray

4.In the hand box

Lonsdor-K518-9

Lonsdor-K518-10

Press [OK] to continue

Current key count:3
Lonsdor-K518-11

Press [OK] to continue,it will prompt you “Communication connecting,please wait…”

Enter the PIN code:2782 we read before,and then press [OK] to continue

Lonsdor-K518-12

Configuring system,about 10 minutes,please wait…

Lonsdor-K518-13

After the process completing,press the start button twice within 5 seconds wait for 2 seconds each time,click [OK] to continue

Lonsdor-K518-14

Then Lonsdor K518 prompt “Program successful,continue to program the next one?’

Lonsdor-K518-15

Hold down the start button for 10 seconds
Lonsdor-K518-16

Lonsdor-K518-17

Release the start button and wait for 5 seconds

Lonsdor-K518-18

Press and hold the start button until the dashboard lits (if not lit,press and hold the start button for about 15 second ,then release,click [OK] to continue

Lonsdor-K518-19

Lonsdor-K518-20

Press the start button and switch ignition off,click [OK] to continue.

Lonsdor-K518-21

The new smart key test ok

Lonsdor-K518-22

Open and close the driver door,make sure all the electrical appliances are off,click [OK] to continue.

Lonsdor-K518-23

System configuring,please wait about 30 seconds…

Remove the key,press the lock and unlock buttons together,and then release,click [OK] to continue

Lonsdor-K518-24

Programming complete

Lonsdor-K518-25

SKP900 key programmer adds Ford Focus new key

Obd2tool.com engineer has successfully added 2 new keys for Ford Focus with original SuperOBD SKP900 key programmer.

Preparation:

check the connection with the car and SKP900 Key Programmer

Start skp-900

Insert the key and turn ignition on

Step 1 Delete keys

->IMMOBILIZER

skp900-add-new-key-1

->FORD

skp900-add-new-key-2

->FOCUS

skp900-add-new-key-3

->IMMOBILIZER2

skp900-add-new-key-4

LOADING…

->IMMOBILIZER SYSTEM

skp900-add-new-key-5

->CHOOSE OBDII ADAPTER

skp900-add-new-key-6

TURN IGNITION ON

skp900-add-new-key-7

->COMMUNICATING…

->DELETE KEY

skp900-add-new-key-8

->IT WILL DELETE ALL REGISTERED KEYS.

ADD MINIMUM 2 KEYS SO AS TO START ENGINE
skp900-add-new-key-9

->PROGRAMMING…

->NUMBER OF KEYS: 2

skp900-add-new-key-10

->PROGRAMMING…

->NUMBER OF KEYS: 0

skp900-add-new-key-11

->DELETE SUCCEED

skp900-add-new-key-12

Step 2 Add new keys

TAKE OUT THE KEY

TURN IGNITION OFF

skp900-add-new-key-13

->ADD KEY

skp900-add-new-key-14

->INSERT A NEW KEY

TURN IGNITION ON

->PROGRAMMING…

->NUMBER OF KEYS: 0

skp900-add-new-key-15

->PROGRAMMING…

->NUMBER OF KEYS: 1

skp900-add-new-key-16

->PROGRAMMING SUCCEED

skp900-add-new-key-17

The same way to add another key

->NUMBER OF KEYS: 2

skp900-add-new-key-18

Step 3 Test keys

Test the two keys newly added

They’re WORKING!

skp900-add-new-key-19

Done! Ford Focus key programming succeed! Unplug the SKP900 key programmer.

What to Do for Xtool X100 Pad Not Start

XTOOL-X100-PAD

What should we do when XTOOL X100 PAD not start when update done, what should you do? Don’t worry, we will introduce to you how to do it by an example for my customer.

Confusion:

I have a problem with Xtool X100 Pad tablet key programmer. After update system x100 pad tablet stopped booting and did not start.

Before that on display show me system update i download then tablet has self reset and turn on. Then on display show only xtool logo don’t run android system.

Methods:

1) Download the Xtool X-100 Pad firmware reflash file https://mega.nz/#!7wNQCaDD!0H9VxkXnNYFbV7vmm_OPDNgXAKMmXFPDA_kFkbDckNQ

2) Paste the file on laptop desktop, connect X100 Pad with laptop

3) Contact Xtool factory technician via Teamviewer

4) They will help reflash firmware.

Well done, if you have any questions about auto key programmer that can not understand, you can contact vippro team in our website: obd2tool.com

How to use VAG OBD helper to read out 4th IMMO data / MQB data?

1.What is VAG OBD Assistant Function? Why do you need a VAG OBD Assistant? Where to get VAG OBD Assistant?
2.How to use VAG OBD helper to read out 4th IMMO data / MQB data?
3.How to use Lonsdor K518ISE to program key with the IMMO data?

1.What is VAG OBD Assistant Function? Why do you need a VAG OBD Assistant? Where to get VAG OBD Assistant?

Vw, Audi, Skoda and other 4th generations of anti-theft system of the cars , in the situation of needing add key or the situation key all lost, the current market equipment can not read anti-theft data (such as Xhorse VVDI2, AVD,I AP PRO, Lonsdor K518ise and other equipment), or need to disassemble the dashboard to get anti-theft data. The steps is complex and risky, and it takes a long time.Now you only need to use VAG OBD assistants, connect to the vehicle and connect to the network to get the anti-theft data of the vehicle in about 3-5 minutes (depending on the network situation, or the number of users to determine the length of time)

After online access to anti-theft data, the system will automatically save the documents according to the frame number in the VAG OBD document directory, generated files, support the use of current popular equipment, can directly generate dealer keys, and learn key data.

For vehicles with MQB anti-theft system, this device can also be used if the anti-theft data cannot be read directly, but it can only be used to add keys. (for example, add the key of Johnson dashboard).A4L Q5 can not read BCM2 data directly, showing data length error, you can use this design to calculate BCM2 data.The 14-year A6 A7 A8 Touareg hui ang 5-generation anti-theft system can not obtain BCM2 data when all the keys are lost. It can also be used to calculate BCM2 data online, and then match the keys with VVDI2 APPRO and other equipment.

Note: The premise of using this equipment is that the vehicle can not be tampered with information, the vehicle state is legal. If the information is tampered with, then the data can not be calculated.

2.How to use VAG OBD helper to read out 4th IMMO data / MQB data?

1.Hook VAG OBD helper up the vehicle.

vag-obd-helper-01

2.Click on “Read car info” to get manufacture, VIN, immo type, power, key count, key ID etc.

vag-obd-helper-02

3.Enable the network connection and upload data to calculate.
The system is reading ECU type.
Click on “Online calculate immo data”.

vag-obd-helper-03
vag-obd-helper-04

4.Online calculate immo data successfully and saved automatically, click on “Yes”.

3.How to use Lonsdor K518ISE to program key with the IMMO data?

1.Connect Lonsdor K518ISE and computer using one USB cable, open “My Computer”, click on the portable device “K518”.

2.Click on “Memory Device”.
Lonsdor-K518ISE-immo-data-01

3.Rick click to open the folder “Customfile”, copy the VAG 4th IMMO data or MQB IMMO data, paste it into this folder.

Lonsdor-K518ISE-immo-data-02

4.Enter Automotive key Programmer K518 function menu, select “Immobilizer”, then ” 4th IMMO”.

Lonsdor-K518ISE-immo-data-03

5.Select “4th engineering mode”.

Lonsdor-K518ISE-immo-data-05

6.Select “Generate dealer key”.

Lonsdor-K518ISE-immo-data-06

7.Select “Yes” to ensure the immo data(bin file) is put into the customfile folder of k518.

Lonsdor-K518ISE-immo-data-07

Differences between AURO OtoSys IM100 and OtoSys IM600

The main difference lies in Mercedes-Benz, VW, Audi software and adapters to work with.

Auro OtoSys IM600 price is: 3450USD/unit with free shipping.

Software difference:
Auro IM600 canread PIN/CS from AUDI Q5/A4/A5 2015-2017 and learn keys to Mercedes-Benz, but IM100 cannot work with Mercedes-Benz, VW, Audi for immobilizer functions.

Adapter difference:
IM600 use UP400. IM100 use UP200.
Up200 doesn’t allow for eeprom and use of breakout leads through the custom pinouts.

Edit to update: Key Programming Tool IM100 is confirmed to have luck with Mercedes-Benz immo.

Now Otosys IM100 with UP400 can work for Mercedes key programming as well as Otosys IM600 does.

Immobilizer functions: OtoSys IM100 vs IM600:

22-1

Note: 22-01 This function is supported.

22-02 This function is not supported.

Special Declaration:

Some of the listed functions are manufacture dependent. The functions and vehicle coverage expand with new update release.

22-2 22-3 22-4