Dimsport Trasdata issue solved by Ktag KTM100 7.020

Last week, I did a test on Trasdata with my China clone KTAG KTM100, for I got info that Trasdata is compatible with K-Tag firmware v7.020- supports the same cars/ecus but shows how many tokens you have left and can supposedly be used with internet connection (ksuite cannot).

I downloaded Dimsport Trasdata software on the web:Dimsport Trasdata.zip

But KTAG ecu tuning master has no tokens showing on trasdata and when switch back to ktag.ept when opening ksuite it says “update not complete connect tool to internet to complete update”? I have noticed though on the old laptop when you open trasdata it has pop up message saying “there is update available”, possibly installing today update automatically and block ktag

Then problem solved! Trasdata is automatically downloading an update now and blocking unit so be careful! I had to flash ktag.ept back, put 6.070 update files in 2.08 update folder and put 6.070 sd files on a NEW sd card.

Unluckily, connection damaged the KTAG V7.020! A friend in mhhauto said something about this, that “you will have to switch back to ktag.ept and put new sd card in with sd files on to fix, when installing this now trasdata automatically updates to the latest version, if you had installed it before the update was released then you just receive a message asking to update when starting trasdata.”

Having read lots of post on forums to find a way around this at present for new installations, and finally, the problem is resolved by taking a version of Chinese KTM100 FW 7.003 Auto ECU Programmer, installing and replacing Trasdata.exe; ChksumDll.dll; TrsdtDLL.dll from the download software.
Infoplugins.dat file I left by Chinese because the reserves more info from Chinese, you have to try … And everything works fine.
Thar is,

First, install KTM 100 from China, then they replace files from the download zip, all as described by in but no update !!!
(((Copy Trasdata.exe from archive to “Program Files / Dimsport / Trasdata”. CopyFolder “Settings” to “Program Data / Dimsport“. Copy files from folder system32 to “Windows / System32)))
Next, use the program online.
Because of an error:
“K-Tag work OK.I try VAG edc17cp20 i have same error (Crp file not found ). K-tag read and write .”

The correct Protocol of KTM100 HW 7.020 are located in “Program Data / Dimsport / pack / ntdpack.zip” they should upgrade to SD card, einetlich to 7003

Ps. Free download KTM100 2.13.ISO [1.58 GB]