How to use Jaguar& Land Rover JLR SDD DataLogger Function

Data logging is one of the amazing features of JLR SDD. Here is a step-by-step guide of using the Data Logger function in JLR Mangoose SDD diagnostic software for Jaguar and Land Rover.

Hardware optional: JLR Mangoose SDD, JLR mangoose pro, VXDIAG VCX NANO SDD
Operating system: Win XP/VMware
Connect mangoose pro cable /VXDIAG interface with vehicle via OBD socket
Run JLR SDD software on the desktop
use Jaguar& Land Rover JLR SDD DataLogger
Click “Auto Read VIN”
use Jaguar& Land Rover JLR SDD DataLogger
The system will display vehicle information after well communication is built
use Jaguar& Land Rover JLR SDD DataLogger
Click “Diagnosis” function
Symptom Selection and click “Continue”
use Jaguar& Land Rover JLR SDD DataLogger
Click “Recommendations” tab
use Jaguar& Land Rover JLR SDD DataLogger
Locate Complete vehicle – Datalogger. Click “Run”.
use Jaguar& Land Rover JLR SDD DataLogger
Select “Other signals”>> “Steering system” >> “Control Module Supply voltage”
use Jaguar& Land Rover JLR SDD DataLogger
Select “Battery voltage”
use Jaguar& Land Rover JLR SDD DataLogger
Select “Lighting status – Puddle lamp”
use Jaguar& Land Rover JLR SDD DataLogger
Select “Mirrors motor outputs – Mirror heat output”
use Jaguar& Land Rover JLR SDD DataLogger
Click use Jaguar& Land Rover JLR SDD DataLogger  icon and than click “Play” icon, you will be able to see the data stream
use Jaguar& Land Rover JLR SDD DataLogger
Turn ignition switch to ON and press tick to continue
PCM and SASM
use Jaguar& Land Rover JLR SDD DataLogger
Select 1st top right icon marked red circle
Select “Exit”. Press tick to exit
use Jaguar& Land Rover JLR SDD DataLogger