How to Make New key for Toyota with SKP900 Key Programmer

Here I will tell you how to program Toyota key with the SKP900 Key Programmer

Choose [IMMOBILIZER]>[TOYOTA]

13-1

Select [IMMOBILIZER1], and it will load by itself, just wait for a while

13-2

Choose [IMMOBILIZER SYSTEM]

13-3

The interface pops out, insert car key and turn on the ignition and press [YES] to continue

13-4

13-5

When it enters [FUNCTION SELECTION], choose [ALL KEY LOST]

13-6

[MATCH NEXT KEY?], press [NO] to go back

13-7

Press [NO]

13-8

Switch off the ignition, and the key can’t turn on the ignition again.

Insert a master key turn ignition on and insert new key and you can turn ignition on now!
13-9

2017 SKP1000 Tablet Key pro compare with Superobd SKP900

Newest 2017 SKP-1000 claims to replace Superobd SKP900. That means SKP1000 can do what SKP900 does and can do more that SuperOBD SKP900 cannot do. Reading below comparison table  about their similarities and differences.

7-1
Attach more:

SuperOBD SKP-900 SKP900 key pro car list

SKP1000 Tablet Key pro car list & user manual

SKP1000 PCB display:

7-2
7-3
To sum up, car key programmer SKP1000 Tablet Key pro wins

– in multifunction

– in user-friendly design (with stand at the back, 1* touch pen 1* Haima 7pin adapter, 1* power adapter, 1* TF card, 1* TF card reader)

– in Newest vehicles

– In Firmware update

Steps for program mazda 2 key of skp900 key programmer

Here is the steps for SuperOBD SKP-900 Key Programmer for my Mazda 2 to do key copy

skp900 key programmer I got it.

1

Mazda 2:

2

two keys : one is original and another is for key copy
3

steps as following:

star the car

4

connect sky 900 auto key programmer to the car

5

Function: immobilizer

6

Brand : Mazda

7

Auto match pincode

8

Select Mazda 2 model from list

System: Mazda M2

9

Choose OBDii adapter and turn the ignition on.

10

need 2 keys

11

Change a new key and turn on

12

13

it is finish make new keys.  if you have any question or problems about Auto Key Programmer. welcome to contact us email sales@obd2tool.com

(Test Report)Which models could be used in SuperOBD SKP900 key programmer

7-1
This post is on SuperOBD SKP-900 Key Programmer what work & not work on what models.

SuperOBD SKP900 key programmer what work & not work on what models:

SKP900 can do all keys lost on:

For USA cars:

2013 CHRYSLER 200 – WORK FINE

2008 DODGE CHARGER – WORK FINE

dodge charger 2009 fobik lost key, pulled pin and added key ok

2013 FORD EDGE – WORK FINE

2011-2013 FORD F-150 – WORK FINE

2013 MUSTANG – WORK FINE

2012 JEEP COMPASS – WORK FINE

2008 JEEP WRANGLER – WORK FINE

2014 KIA RIO – WORK FINE

2013 KIA SOUL – WORK FINE

2013 KIA FORTE – WORK FINE

2009 TOYOTA CAMRY – WORK FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORK

2012-2013 TOYOTA CAMRY – WORK FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORK

2013 TOYOTA HIGHLANDER – WORK FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORK

2002 VOLKSWAGEN GTI – WORK FINE

2005 – NISSAN 350Z – WAS ABLE TO PULL BCM BUT COULD NOT PROGRAM KEY. I THINK JUST NEED TO PLAY WITH IT LONGER

2013 FORD FOCUS – DOES NOT WORK

2014 FORD FIESTA – DOES NOT WORK

Kia in USA is transponder optional and most do not have it still. SKP900 from obd2tool.com is to program the remote.

This car used a flip key.

2013 Mustang – WORK FINE. 10 minute security wait. Everything work perfect. There is option for Mustang 2011-2013 on my device.

For UK models and other area models———–

2015 HONDA ACCORD LOST ALL KEY WORK AAAAA..

2x Honda civic 2008 (can)

2015 CIVIC SMART KEY ALL LOST WORK AAAAA

2014 CRV SMART KEY ALL LOST WORK AAAA..

2015 ODYSSEY SMART KEY ALL LOST WORK

2012 ALTIMA SMART KEY ALL LOST WORK

2004 CARAVAN LOST KEY WORK

land rover discovery 3 work 100%, Freelander 2 doesn’t work.

2x Landrover Discovery 3 add key

program smart key for ford explorer with all key lost.

need two smart key after resetting. work 100%

Program smart key for ford explorer with all key lost, need two smart key after reseting. work 100%

2008 focus petrol uk model – WORK FINE

VW transporter year 2000 and vw transporter 2007 read pin code and program the key ok.

Mazda 3 2007 lost keys

Jaguar X-type 2005 lost keys

Jaguar XJ 2006 lost key

Peugeot 407 2006 add key

2013 Mazda 3

Toyota smart key

Transit with blue key takes minutes to work

Toyota landcruiser 2009 add key ok. In adding key USA and Europe toyota are the same way ,it on all keys lost that they are both totally differents !
One can be reseted by OBD and you can do also OBD for some kind of toyota europe but there is a risk to corrupt dump or steering lock ,for europe best solution in my point of view is eeprom and dump way.

2015 Maserati ghibli read pin ok
Key programming ok
2013 Acura

added keys on range rover 2010..ok

did a hyundai 2011 remote via ix35 OK!

I did 2013 ford Ranger work good

ford focus 2008, OK

Fail – Key Programm Tool SuperOBD SKP900 key programmer what not work on what models:

Pear keys in uk – fail

Toyota Avensis around 2008 with 3 button triangular remote – fail

New focus smart key programming – Failed

2014 TOYOTA SMART KEY – fail

kuga 2010 not work – communication – failed

Toyota highlander 2014 LOST ALL SMART KEY – failed

2013 Brilliance Jin Bei H2L will not program key , or reset immo or replace ecm , plus wrong pin code extration too

Seat add key not on the list

skoda 2000 tdi – fail to connect

Latest ford cars add keys not ok

the juke and qashqai from 2010+ for Keyless, and with ignition lock types! –not so good.

Failed on kia picatna 2007 , x100 did
failed on Toyota prado 2014 g chip add key, x100 did
failed on Toyota forturner 2014 g chip add key , obdstar X100pro can add key on Toyota G chip by removing immobilizer and initialize data.

Fail on Toyota g chip programming, Handy baby did.

Ford Kuga 2013 – program key failed.

Toyota yaris 2003  add key fail

Failed to read pincode for jeep commander 2007 CAN model non fobik

Ford connect add key is not on the menu

Ford Focus 2005 program keys-> not working

2010 disco 4, FAILED

I read pin code for vw Bora 2000 year with SKP900 but faulty.then i read with SBB, pin ok read and program the key OK.

Three steps to add Mitsubishi Pajero new key by SKP900

This blog is going to tell you SuperOBD SKP-900 V5.0 can add new key for Mitsubishi Pajero in just one minute! It’s amazing and please read down below steps.

2-0

Step1. Start SKP-900 SKP900 then choose “Immobilizer”→ “Mitsubishi”

2-1

2-2

Step2. Choose “System Type” and “Type 1” and “IMMO System”. Next is to turn on the ignition.

2-3

Step3. Choose “Key Adapt” and input the authorize code.

2-42-5

It will show “Key Program Success”. Press YES button and insert the new key in 5 seconds then turn ignition on.

2-6

2-7

And Key Programm Tool SuperOBD SKP900 now make new key for Mitsubishi Pajero successfully in 1 minute!

Superobd SKP900 programs smart remote Nissan Sylphy 2013 year

This post shows how to use SuperOBD SKP900 program smart remote Nissan Sylphy 2013 year by Obd2tool.com.

Purpose:

Calculate Pin code and then program smart remote key

Procedure:

This is smart remote key …

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-1.jpg

Turn ignition on

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-2.jpg

Open Superobd Auto Key Programmer SKP900, come to menu then choose “Nissan” under IMMOBILIZER.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-3.jpg

Select “New Structure”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-4.jpg

Select “Smart key”, loding…

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-5.jpg

Select “KEYLESS SYSTEM”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-6.jpg

Get message “Choose OBDII adapter Yes to continue”, turning on then press YES.

Read BCM code

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-8.jpg

Insert key and turnning on “Yes” to continue

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-9.jpg
Read out BCM code

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-10.jpg

Use Nissan Calculator to find Pin code.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-11.jpg

Read out PINCODE: 2166 (cause our car after 2009 year) by Nissan Calculator

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-12.jpg

Use pin code: 2166. Back to “Function Selection” then select “Activate Steeling Lock”, press

“Yes” button.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-13.jpg

Get message “If keyless want activate steering wheel, first turn IGN off “Yes” Continue.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-14.jpg

All keyless will be deleted.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-15.jpg

Enter Pincode 2166

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-16.jpg

Check INPUT VALUE 2166 “Yes” OK “No” Return.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-17.jpg

Activate success wait new keyless.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-18.jpg

Key number 1 and number 2

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-19.jpg

Register KEY Number 1, put key number 1 on Smart button and press 1 time. Security light blink 4 times. Key LED steady. Press smart button to off.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-20.jpghttp://forobd2tool.com/wp-content/uploads/2017/08/1/28-21.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/28-22.jpghttp://forobd2tool.com/wp-content/uploads/2017/08/1/28-23.jpg

Put key number 2 on Smart button and press 1 time.Security light blink 4 times.Turn IGN off.

Use key number 1 turn on again. Turn IGN off. Press brake pedal then press to start.

Engine can start. Turn IGN OFF. Open driver door and close, Key LED blink 5 times.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-24.jpg
Test remote, it can work.

http://forobd2tool.com/wp-content/uploads/2017/08/1/28-25.jpg