SKP 1000 Key Programmer VS SKP 900 Key Programmer VS OBDSTAR X300 pro 3 VS OBDSTAR X100 Pro

SKP1000 Key Programmer VS SKP900 Key Programmer:

图片3

 

图片4

 

What’s the difference between SKP1000 Auto Key Programmer and SKP-900 Car Key Programmer?

Lonsdor SKP1000 tablet key programmer will release soon. SKP1000 Auto key programmer with multifunctions like mileage correction, Oil/service Reset, EPB and special function. SKP1000 Car Key programmer more power than SKP-900 Key programmer.

Below obd2tool.com help customer compare SKP1000 with SKP 900 obd2 key programmer following:

1.Package:

1)skp1000:

图片5

 

2)SKP 900:

图片6

 

2.Function

1)SKP1000:

1.Clear key memory;

2.Program keys, proximity keys, smart key, flip keys; Program after-market and OEM keys;

3.Read keys from immobilizer memory New mechanical key number programming;

4.Vehicle identification key programming; Reset ECU& Reset immobilizer;

5.New remote controller programming; Immo PINCODE reader for many vehicles and no need pincode when programming keys for many vehicles Mileage adjustment via OBD;

6.With full and strong database for the most important vehicle makes; Remote assistance EEPROM chip read and immobilizer initialization;

7.EPB(Electric park brake); throttle body adjustment Oil/Service reset; EEPROM/PIC adapter

2)SKP900:
1.Supports all key lost
2.Supports TOYOTA G Chip and H Chip
3.Can read pin code for many vehicles, only a few vehicles need to get pincode from other place.
4.Support almost all vehicles in the world
5.Don’t need pincode when programming keys for many vehicles

3.Vehicle coverage:

1)SKP1000:

Compatible with these protocols: SAE-J1850 PWM, SAE-J1850 VPW, KWP2000, ISO-9141, CANBUS, SINGLE CAN and these car brands: BAIC, BENZ, BESTURN, BMW, BRILLIANE, BYD, CHANGAN, CHANGHE, CHERY, CHRYSLER (CHRYSLER/ DODGE/JEEP), DFFENGSHEN, DFPV, FAW, FIAT,FORD/LINCOLN, GEELY/ HUAPU /SQYL,GM(BUICK/CADILLAC/CHEVROLET/GMC/HUMMER),GREATWALL, HAFEI, HAWTAI, HIMIKO, HNMAZDA, HONDA/ACURA, HONGQI, HYUNDAI, ISUZU, JAC, JAGUAR, KIA, LANDROVER, LIEBAO, LIFAN, LUFENG, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN/INFINITI, OPEL, PEUGEOT/CITROEN, PORSCHE, PROTON, QQROS, RENAULT, ROEWE/MG, SGMW, SMART, SSANGYONG, SUBARU, SUZUKI, TJFAW, TOYOTA/LEXUS, VW/AUDI/SKODA/SEAT, YOUNGLOTUS, ZZMAZDA, ZZNISSAN, ZOTYE;

2)SKP900:
ACURA, ALFA, AUDI, BUICK, CADILLAC, CHEVEROLET, CHRYSLER, CITROEN, DODGE, FIAT, FORD, GM, HONDA, HYUNDAI, INFINITE, JAGUAR, JEEP, KIA, LAND ROVER, LEXUS, MAZDA MITSUBISHI,NISSAN, OPEL, PEUGEOT, PROTON, RENAULT, SMART, SSANGYONG, SUBARU, SUZUKI, SKODA, TOYOTA, VW, BRILLIANCE, BYD, CHANGAN, CHANG FENG, CHERY, DONG FENG, NISSAN, FAW, GEELY, GREAT WALL, HA FEI, HAINAN, MAZDA, LI FAN, LU FENG, LUXGEN, MAPLE, MG, ROEWE, ZOTYE

Comparison of SKP-1000,SKP900,OBDSTAR X300 pro 3 and OBDSTAR X100 Pro:

QQ截图20180110152638

QQ截图20180110152731

 

QQ截图20180110153159

QQ截图20180110153224

 

Conclusion:
SKP-1000 advantages:
1.More user-friendly design with stand at the back, touch pen, TF card and TF card reader
2.Firmware update support
3.Full special functions works
4.Pin code calculation works
5.Add key for Toyota G an H chip

Super OBD SKP-900 key pro advantages:
1.Update online for free lifetime
2.Available with Portuguese
3.Reasonable price
4.Many users tested SKP900 works fine to program key on many car models and read pin code on a part models

OBDSTAR X300 PRO3 advantages:
1.Working together with OBDSTAR RFID to program key on VW 4th & 5 th IMMO
2.Multifunction besides IMMO function, also optional to choose full package and standard package.

OBDSTAR X100 PRO advantages:
1.Many users tested OBDSTAR X100 PRO ok to program key and correct mileage on many car brands, it’s reliable.
2.Cheapest

 

If you want more other products,please click here to our website.

how to update SKP1000 key programmer

Here is show how to update skp1000 key  programmer

Take out the TF card and insert it into the card reader

plug into the computer USB port
go to My Computer/local disk (H:)
“Format” disk H:
Tip: Tick on the “Quick format” and click on“Start”
format completes
go to the official site to download the update file
then copy and paste the file into the TF card
plug the TF card into the machine

power on the machine to the main interface

click on “Firmware update”

choose “System firmware update”, press “Yes”

Update successfully

Press “No” to back.

go to ” Adapter firmware update”

after finish, reboot the machine for use

Done

How to add 2007 Chrysler 300C key by SKP1000 Key Programmer

Guide to use SKP1000 tablet key programmer to add ID46 electronic key on a 2007 Chrysler 300C by OBD.

Key information:

Original key: 3-button straight key

Frequency: 433MHz

Chip: 46 chip

Remote programming: Automatically generate remote

Pin code/security code: No need

Device: SKP1000 tablet car key programmer

Procedure:

Connect SKP1000 key programmer with vehicle via OBD socket

Turn ignition ON

22-1

Select Chrysler

22-2

Select 300C
22-3

Select Immobilizer system

Choose OBDII connector

Turn ignition ON

Press YES to go on
22-4

Select Add new key
22-5

Insert new key to be programmed

Turn ignition ON

Press YES to continue
22-6

Key Programm Tool SKP-1000 adds Chrysler 300C 2007 key success.

Automatically generate remote control and start engine.

How to Unlock and Add Toyota VXR V8 Smart Key

Guide to unlock and program smart key on a 2016 Toyota Land Cruiser VXR V8 5.7 4×4.

17-0

The solution was provided by a Chinese locksmith A Jie.

Problem:

A customer bought a Toyota Cruiser VXR V8 5.7 in Aug, 2016. When came back home he found one of keys did not working, could not start the vehicle. He came me for help.

Diagnose:

Check the key frequency and chip type with ND900 key copy machine from obd2tool.com. It showed key’s programmed, so the smart key is okay.

17-0
17-1
Analysis:

1. The smart key has been programmed but not been learned

2. 4S store gave you the wrong key (the key is not for this vehicle)

How to check:

Method 1:

Program/learn the smart key by using SKP1000 Tablet car key programmer. Unfortunately, skp-1000 failed to learn key. So the smart key is not correct key for this vehicle.  You should get the smart key unlocked and programmed. Go and check method 2.

Method 2:

Step 1: Unlock Smart key

Unlock the smart key with Xhorse VVDI2 key programmer or ND900 Mini

17-3

17-4
Perform Blank Check,  key indicator will flash within 5 seconds if VVDI2 unlock success

17-5

Again use Mini ND900 to check the unlocked smart key.

It shows not been programmed
17-6

Unlock smart key done.

Step 2: Add/Program smart key

Connect SKP1000 key programmer with vehicle via OBD socket

Select Immobilizer function- >select Toyota->Smart key CANBUS-> Smart key system

17-7 17-9
Choose OBDII connector

Turn ignition ON

Press YES to continue

17-10

Press the Start button
17-11

Put the registered smart card into coil.

If hear a beep sound, take away the smart card

17-12

Select Add smart key

17-13

the working key is close to the emergency starting induction antenna

17-14

Change a new smart key and put it into the coil

Press YES to continue

17-15

the new smart key is close to the emergency starting induction antenna
17-16

Configuring…

17-17

Program/Add smart key success
17-18

Test the new smart key.

How to use SKP1000 to Program Fiat Siena ID48 key

Older Fiat Siena or Palio required to remove ECU or write key to start to make new key. Here is revolutionary solution on getting Fiat ECU ISO code and programming special ID48 chip key by using SKP1000 key programmer via OBD directly. Auto Scanner Tool SKP1000 tablet=SKP900+ Lonsdor CI600 Plus. fiat-siena

12-1

Instruction:

Step 1: Read ECU ISO code (security pin code)

Select car brand: Fiat

12-2

Select read iso code

12-3

Select Electronic immobilizer system
12-4

Select read iso code

12-5

After read ecu iso code success, disconnect the battery.
If read iso code failed,please disconnect the battery and try again
(Anyway, disconnect the battery)

12-6
SKP-1000 Auto Key Programmer read Fiat info and fiat iso code
Press YES to continue

12-7
Check if you have a working key
If yes, Press YES button to continue
12-8

Turn ignition to ON position

12-9

Turn ignition to OFF position

12-10

Turn Ignition ON

12-11

Read iso code success

12-12

manually enter 5-digit iso code
12-13

SKP1000 will read the immo data, please write download the numbers (will be used to generate chip)

Step 2. Generate Fiat special ID48 chip
12-14

Select Fiat common chip to generate special chip

12-15

select generate Fiat ID48 special dealer key

12-16

Insert the immo adapter into the SKP1000 car key programmer, select Special function and select Generate Fiat chip

12-17
Insert the blank ID48 chip into the coil of the adapter

12-18

Manually enter 24-digit immo code (read previously)
12-19
Enter 24-digit code marked red

12-20

confirm the entered digits

Step 3: Program chip key

12-21

select Program key

12-22

Select Siena key programming,
SKP1000 will also program key for Fiat 500, Boyue,Palio,Leap,viaggio and Perla

12-23

Select Electronic immobilizer system
12-24

Select OBDII connector
turn ignition to ON position

12-25

select Program key
Key without programming cannot be used
Press YES to continue

12-26
enter 5 digits iso code
confirm

12-27

continue to program more keys
Press YES to continue
12-28

please change next key

12-29
If the dashboard indicator goes off, program success.
Disconnect SKP 1000 and test the new key.

SKP1000 programmer successfully add smart key on Hyundai SONATA 8

Post topic: Step -by -step procedure on how to use SKP1000 tablet key programmer to program smart key on Hyundai SONATA 8 successfully.

2-01

Not familiar with SKP1000 tablet key programmer? click for details.

Step-by-step procedure:

For example, to program smart key on Hyundai SONATA 8, firstly connect the main cable to the machine, then plug the OBDII adapter to the car.

Power on the SKP1000 machine, until you see the LOGO, press [YES] to main menu, Choose “Immobilizer”, press “Yes” to vehicle list.

Choose model: Hyundai, press [Yes] to enter.
2-02

Choose “Smart key”, press [Yes] to enter.

2-03

Choose ” by Vehicle”, press [Yes] to enter.

2-04

Choose “SONATA 8 (with slot), press [Yes] to enter.

2-05

Choose “Smart key (with slot), press [Yes] to enter.

2-1

Follow the tip to turn off ignition, press [Yes]

2-2

Follow the tip to open the door and close for one time, press [Yes].

2-3

Choose “Program Smart Key”, press [Yes]

2-4
Follow the tip, insert the smart key into the slot, and you can hear alarm sound, turn off the ignition, press [Yes].

2-5
Input the password

2-6
Check if the password is correct, press [Yes] to confirm.
2-7

The first smart key program successfully, and it will ask you if you program the next one, press [Yes] to confirm.

2-8

Insert the second smart key into the slot, you can hear the alarm sound, press [Yes].

2-9
Program key successfully, press [NO] to back.
2-10

With two new smart keys, you could start the obd key programmer, if you need to add more keys, just repeat the above steps.

Done.

Any question, please contact your supplier www.obd2tool.com