How To sovled V2018.12 MB SD Connect C4C5 HDD blue screen

mb-star-c4

Xentry Connect C5 provides complete diagnosis for newest hybrid W222,with a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software,it will allow you to work on windows xp, win7/8/10 system.

Customer’s problem:
We had purchased one set MB SD connect C5 with internal HDD from obd2tool.com, We really appreciate the faster shipment, all is well packed dhl week quickly received. But when we install the HDD to our computer, we have blue screen and doesn’t access to computer windows. We are wondering if we get the broken HDD……

Our Answers:

The BMW ICOM ICOM A2 A3 or MB Star C4 C5 drives we assign to our customers are generally AHCI-mode hard drives with SATA port.

If your laptop BIOS is not set to the same hard drive mode (AHCI mode), if you connected to our hard drive to your computer, there will be a blue screen or can not find the hard drive.Please make sure your HDD is set to AHCI in the BIOS.

To check this you turn the laptop on and press F2, it will enter the BIOS. Now go to “ONBOARD DEVICES” or “SYSTEM CONFIGURATION” then go to “SATA OPERATION” press enter and make sure its set to AHCI not ATA or any other option.

Please have a minimum of 2GB of ram/memory in your laptop, a lot of people only have 512mb or 1gb, it is OK but the new system may run slow and its recommend to really have 4GB ram, but 2GB also can be enough.

– We can supply Laptop + Software all ready for you.
– We can supply FULL package C4 SD + Laptop + Software for you. MB Star Diagnostic Tools
– We can carry out some C4 SD repairs.
– Remote installations available (if you supply the correct HDD size and install the correct Windows OS).
– Teamviewer remote support available.

How to Solve Mercedes Benz Xentry Diagnostics SCN Coding Error Error on Starting the process

Xentry Diagnostics is the only software for Mercedes Benz SCN online coding.Some customers got system error after logining SCN online account.Bellow, OBD2TOOL share you how to solve Mercedes Benz Xentry Diagnostics SCN Coding Error “Error on Starting the process”.

Error Showed:

c4-error-1

Solution from OBD2TOOL.com Tech Support Team:

1.You got this error because your xentry software version is too old to support online coding.
Mercedes Benz SCN coding new require new software such as version 2018.9 or 2018.12.

2.You can crack your software ,but it will take the risk that software damage

3.To access to SCN coding, obd2tool.com suggest you to purchase a new version xentry diagnostics software ,support more new vehicles and programming online / offline.

How to Retrofit Mercedes W204 Rear Lights by MB Star DAS

Here is a little tutorial on Mercedes-Benz W204 rear lights retrofit by using MB Star Diagnosis DAS software with benz star c4.

Disclaimer: This is for W204 chassis only. You are at your risk.

Start DAS Developer and do the usual “quick test”

(all our DAS comes with developer mode)
Open op the REAR SAM module:

24-1

Go to Development data

24-2
Select control unit adaptions

24-3

Go to the Control unit adaptions (Variant Coding)

24-4

Go to the Parameter Lichtfunction:

24-5

Change the coding according to the below screenshots:
24-6

24-7

Save the config
24-8

Select yes:

24-9

Now shut down MB Star DAS FROM Obd2tool.com, shut down the car and lock it, now start the car again and everything should be working correctly.

MB Star Diagnostic Tool series

MB STAR Diagnostic Tool series are the Mercedes-Benz approved dealer diagnostic systems for troubleshooting and programming.

MB Star diagnostic hardware:

MB STAR series now includes: WIFI MB SD Connect Compact 4 system, Super MB STAR C3 diagnostic system, MB Star C3 multiplexers (best quality, best price and C3 pro with 7 cables) and MB STAR Compact 4 system.

http://forobd2tool.com/wp-content/uploads/2017/07/1/18-1.jpg

All Star diagnostic system will do  Mercedes Benz 1989~up to now Car, Bus, Trucks, Sprint, Smart  (expect SP45-C best price MB STAR C3)

MB Star C4 is the newer Star system for newer models and support Mercedes with UDS protocol. SD Connect supports offline/online programming and Vediamo engineering software as well. Super MB STAR is the only Star tool that can be updated online.

Star diagnosis software:

All MB STAR Diagnostic systems come with multi-language basic software applications.

1.D-A-S / Xentry: the automatically Diagnosis Assistance System, Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car system testing
2.W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3.EPC.net: Electronic Parts Catalog
4.ST Finder: Part location finder
5.STARUTILITIES: the movement management system and self-test
6.SDMEDIA
7.PL69

http://forobd2tool.com/wp-content/uploads/2017/07/1/18-2.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/18-3.jpg

Super Mb Star C3 comes with more software programs, including Smart Tan Code, Developer model and Benz Disassembly system etc comparing with other Star systems.

There are basic 3 formats Star diagnosis software HDD: IBM T30 HDD, Dell D630 HDD, and moveable external HDD. Internal HDD runs faster and stable then external HDD. While external HDD can be easily replaced and has no computer limitation (any laptop has COM-PORT)