Lonsdor K518 Smart Key Programming for Chevrolet IMPALA 2014

Posted on December 17, 2018 by wp-admin

Here comes a guide on how to use Lonsdor K518 key programmer to perform smart key programming for Chevrolet IMPALA 2014.

Procedures:

Connect Lonsdor K518 to from OBD2TOOL vehicle and enter the immobilization menu to select “Chevrolet” brand

Select “Cruze”

Select “-2016”

Select “Smart Key”

Select “Add smart key”

Please turn on the ignition switch (do not press the brakes,hold down the start button for about 8 seconds till the dashboard is fully lit ,[OK] to continue

Insert the smart key to be programmed into the key slot,take the others out of car,the slot position generally lies in:

1.Inside the arm hand

2 .Under the cup

3.Next to the ashtray

4.In the hand box

Press [OK] to continue

Current key count:3

Press [OK] to continue,it will prompt you “Communication connecting,please wait…”

Enter the PIN code:2782 we read before,and then press [OK] to continue

Configuring system,about 10 minutes,please wait…

After the process completing,press the start button twice within 5 seconds wait for 2 seconds each time,click [OK] to continue

Then Lonsdor K518 prompt “Program successful,continue to program the next one?’

Hold down the start button for 10 seconds

Release the start button and wait for 5 seconds

Press and hold the start button until the dashboard lits (if not lit,press and hold the start button for about 15 second ,then release,click [OK] to continue

Press the start button and switch ignition off,click [OK] to continue.

The new smart key test ok

Open and close the driver door,make sure all the electrical appliances are off,click [OK] to continue.

System configuring,please wait about 30 seconds…

Remove the key,press the lock and unlock buttons together,and then release,click [OK] to continue

Programming complete

Lonsdor k518ise feedback

Posted on December 7, 2018 by wp-admin

Lonsdor K518ISE Key Programmer feedback 2018/12/5

Mitsubishi space wagon 2003, precoded id61 and programmed key ok.

Corsa E (2016) read PIN (BCM) = OK

VW Amarok 2016 add key ok and backup eeprom

FIAT 500 2008 Read Pin code and preapre remtote key than program. ALL FINE

I have start loving this toy when i bought this Auto Key Programmer was working 20% ok 80% not Now it is 95 – 5. Today megane 3 year 2009 keyless key made job in 2minutes

Porche Panamera 2010 km adjust obd job done

hyunday i20 2015 year
read pin ok
add key ok

Citro c5 2008 read pin add key ok
307 Kline read pin fail / add key ok

206 kline all key lost read pin ok about 3sec
opel Zafira b read pin add key
Touran 2006 learn key and remote ok

Zafira B, read pin and add key, – Success (note, this failed under Zafira B in menu, but i chose type 3 from by system for both pin read and program and works fine)

Peugeot 607 2006 abrites won’t connect with BSI to read pin and key learning too .
Lonsdor read pin and program key 2 min .

Renault Fluence 2015 keyless go works excelent,in fact,zed full asks for pin and Lonsdor doesn’t.The key works ok in central module and keyless go,5 min job.

Suzuki Swift 2015-> (pcf7961)
all key lost
Program without pin – OK (2min)

ford focus 2006 year
add key (all key lost) work all ok

How to use VAG OBD helper to read out 4th IMMO data / MQB data?

Posted on November 23, 2018 by wp-admin

1.What is VAG OBD Assistant Function? Why do you need a VAG OBD Assistant? Where to get VAG OBD Assistant?
2.How to use VAG OBD helper to read out 4th IMMO data / MQB data?
3.How to use Lonsdor K518ISE to program key with the IMMO data?

1.What is VAG OBD Assistant Function? Why do you need a VAG OBD Assistant? Where to get VAG OBD Assistant?

Vw, Audi, Skoda and other 4th generations of anti-theft system of the cars , in the situation of needing add key or the situation key all lost, the current market equipment can not read anti-theft data (such as Xhorse VVDI2, AVD,I AP PRO, Lonsdor K518ise and other equipment), or need to disassemble the dashboard to get anti-theft data. The steps is complex and risky, and it takes a long time.Now you only need to use VAG OBD assistants, connect to the vehicle and connect to the network to get the anti-theft data of the vehicle in about 3-5 minutes (depending on the network situation, or the number of users to determine the length of time)

After online access to anti-theft data, the system will automatically save the documents according to the frame number in the VAG OBD document directory, generated files, support the use of current popular equipment, can directly generate dealer keys, and learn key data.

For vehicles with MQB anti-theft system, this device can also be used if the anti-theft data cannot be read directly, but it can only be used to add keys. (for example, add the key of Johnson dashboard).A4L Q5 can not read BCM2 data directly, showing data length error, you can use this design to calculate BCM2 data.The 14-year A6 A7 A8 Touareg hui ang 5-generation anti-theft system can not obtain BCM2 data when all the keys are lost. It can also be used to calculate BCM2 data online, and then match the keys with VVDI2 APPRO and other equipment.

Note: The premise of using this equipment is that the vehicle can not be tampered with information, the vehicle state is legal. If the information is tampered with, then the data can not be calculated.

2.How to use VAG OBD helper to read out 4th IMMO data / MQB data?

1.Hook VAG OBD helper up the vehicle.

2.Click on “Read car info” to get manufacture, VIN, immo type, power, key count, key ID etc.

3.Enable the network connection and upload data to calculate.
The system is reading ECU type.
Click on “Online calculate immo data”.

4.Online calculate immo data successfully and saved automatically, click on “Yes”.

3.How to use Lonsdor K518ISE to program key with the IMMO data?

1.Connect Lonsdor K518ISE and computer using one USB cable, open “My Computer”, click on the portable device “K518”.

2.Click on “Memory Device”.

3.Rick click to open the folder “Customfile”, copy the VAG 4th IMMO data or MQB IMMO data, paste it into this folder.

4.Enter Automotive key Programmer K518 function menu, select “Immobilizer”, then ” 4th IMMO”.

5.Select “4th engineering mode”.

6.Select “Generate dealer key”.

7.Select “Yes” to ensure the immo data(bin file) is put into the customfile folder of k518.

Lonsdor JLR-IMMO Car List Immo & Dash

Posted on August 1, 2018 by wp-admin

Lonsdor JLR-IMMO auto key programmer for Jaguar and Land Rover

can OBD program new keys or change km for the newest Jaguar, Land Rover after 2016, some Land Rover 2018.

Lonsdor JLR-IMMO:

key program

odometer correction

Lonsdor JLR-IMMO Land Rover:

(1) Land Rover 2008-: Immobilizer and smart key

(2) Land Rover Discovery3: Immobilizer

(3) Land Rover Freelander: Immobilizer and smart key

(4) Land Rover Freelander2: Immobilizer and smart key

(5) Land Rover Discovery4: smart key

(6) Land Rover Evoque: smart key

(7) Land Rover Defender: remote

(8) Land Rover new models KVM case’s software version: FK72

(9) Land Rover new models KVM case’s software version: HPLA

Lonsdor JLR-IMMO Jaguar:

(1) Jaguar XF: smart key

(2) Jaguar SJ: smart key

(3) Jaguar F-TYPE: smart key

(4) Jaguar X-TYPE: Immobilizer

(5) Jaguar Sovereign: Immobilizer

(6) Jaguar XJ6: Immobilizer

(7) Jaguar XJ8: Immobilizer

(8) Jaguar XJR: Immobilizer

(9) Jaguar XK: remote

(10) Jaguar XKR: remote

(11) Jaguar new models KVM case’s software version: FK72

(12) Jaguar new models KVM case’s software version: HPLA

IMPORTANT: JLR-IMMO add KVM and BCM

KVM&BCM

KVM : FK72-14C104-BF

BCM : BJ32-14C184-AC

KVM : DPLA-14c104-CA (without reflash, working directly without degrade or upgrade)

KVM:

DPLA-14C104-C NEW

FK72-14C104-BA NEW

FK72-14C104-BB NEW

FK72-14C104-BC NEW

FK72-14C104-BD NEW

FK72-14C104-BE NEW

FK72-14C104-BF NEW

BH42-14C184-AA NEW

FK72-14C104-AF

FK72-14C104-AH

BCM:

DPLA-14C184-AM NEW

BJ32-14C184-AC NEW

CPLA-14C184-AE NEW

CPLA-14C184-AF NEW

GX73-14C184-AJ

GX73-14C184-AK

GX73-14C256-AH

Note that VPW protocols of Jaguar’s old model is unsupported

How to program Audi Q3 2013 key with Lonsdor K518ISE

Posted on June 15, 2018 by wp-admin

Audi Q3 2013 key to program with Lonsdor K518ISE Key Programmer in step by step.

The car model

The key

Capabilities:

1. backup car EPROM data;
2. Restore EPROM: copy the backed up EPROM data onto the car computer,to restore it to the original state;
3. Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;
4. Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;
5. Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;
6. Delete key: delete the programmed key;
7. Reset dashboard
8. Odometer adjustment: to correct mileage;

Note:

1. During all the system operation, the dashboard will be in the extinguished state, that is normal;
2. Delete key process:

Step 1. Read immo data; Step 2. Select an existing key; Step 3. Write back immo data.

Car & key info:
Chip model: Dedicated 48 chip
Remote type: 220G 315 frequency
Key embryo no.: No.31
PIN code requirement: Backup EPROM data
Remote generation: Program smart key complete, remote will automatically generated.
OBD position: Under the steering wheel:

Procedure:

Backup EPROM
1. This function can read the device EPROM data and save in Key Programmer K518ISE;
2. For smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Read the vehicle PIN code and other info;
6. Please enter the file name to be saved;
7. EPROM data is saved.

Restore EPROM
1. Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via K518ISE;
2. For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Please confirm the current data is the car EPROM data;
5. Writing EPROM data, about 2 minutes, please be patient;
6. Resetting the dashboard, EPROM data is restored.

Make dealer key
1. This function can generate a dealer key to be programmed, then use this key to perform “Add key” operation;
2. For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Please choose to vehicle brand;
6. Please insert the blank key to be programmed into the K518ISE card slot;
7. Make dealer key success.

Add key (OBD)
1. This system is suitable for directly programming smart card dealer key.Directly add key(suitable for folding dealer key directly programming)
2. This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;
3. For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
4. The system read out the part number, now is going through security certification, and loading external code;
5. Getting system data, it takes about 2 min, please be patient;
6. Writing immodata, about 2 minutes, please be patient;
7. Add key complete.

Delete key
1. This function can delete an existing key;
2. The process of this function:
Step 1. Read anti-theft data Step 2. Select an existed key Step 3. Write back immodata;
3. For a smart key, please turn off and on the ignition, and then click OK;otherwise click OK directly;
4. The system read out the part number, now is going through security certification, and loading external code;
5. Getting system data, it takes about 2 min, please be patient;
6. Please select the key to be deleted;
7. System communicating, delete complete.

Reset dashboard
1. Establishing communication, the system is resetting the dashboard;
2. Reset complete.

Odometer adjustment
1. This process can read and calibrate the odometer mileage;
1. if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;
3. Read the current mileage;
4. Going through security certification and loading external code, getting data, it takes about 2 minutes;
5. Please enter the new mileage needed to be calibrated ;
6. During writing… write complete.

Lonsdor K518ISE not access to any testable car model solution

Posted on June 14, 2018 by wp-admin

If the Lonsdor K518ISE can’t access to any testable car model, the OBD cable should be the main reason after testing again and again by the Lonsdor engineer.

Here is the method to test the OBD cable (Verified working great):

1.Unplug the K518ISE main unit and turn it off

2.Connect the DB25 cable(OBD cable) to Auto Key Programmer k518ISE main unitusing amultimeter and switch to the diode stalls.

Note: there are 3 connectors on the OBD cable:

Connector 1: connect K518ISE OBD port;

Connector 2: connect KPROG adaptor

Connector 3: connect the vehicle OBD port

Pic: 3 connectors on OBD cable

3. Use the red pen to touch the metal part(as shown in pic 2 in red）

Pic: Metal part on K518ISE OBD port

4. Use the black pen to test the resistance of each pin of the vehicle connector (As shown in pic 3) , make sure that you hold the vehicle connector in the way just as the pic shows:

Pic : 16 pins on the vehicle OBD connector

PIN 1 and 8 should have no resistance; PIN2,3,4,5,6,7,9,10,11,12,13,14,15,16 should have resistance.

If all pins have no resistance, the problem should be the DB25 cable.

If all pins are tested ok but the machine still can’t access to any supported car model, then you can ship back the machine, adapters and DB25 cable for testing.

www.obd2tool.com

Lonsdor K518 Program Kia KX3 2013 All Smart Keys Lost

Posted on November 30, 2017 by wp-admin

Guide to read pin code and program smart key on a Kia KX3 year 2013 when all keys have lost by using Lonsdor K518ISE key programmer.

Key info.:

Original key: 3-button smart key

Chip: 47 Chip

Start: One button start-stop

Card slot: No

Pin code reading: by OBD

Device to program: Lonsdor K518 car key programmer

Guide:

Step 1: Read 47 Pin Code

Connect K518 host with vehicle via OBD diagnostic socket

Select Kia->Read Pin Code->Read Pin Code (47 smart card)

Turn ignition switch to ON position

Open and close driver door for once

Press on Start button. Open and close driver door once

Communicating…

K518ISE key programmer read Kia KX3 47 pin code success

Write down the pin code

Step 2: Program Smart Key

Select KX3->Type 1->Program Smart Key->Program Smart Card

All smart keys need to be programmed, otherwise cannot start vehicle.

Turn ignition off. Open and close driver door once.

Auto Key Programmer Lonsdor K518ISE will require to enter 6-digit pin code read from Step 1

Press YES to continue

Prepare smart key to be programmed, stick the smart key to Start button within 5 sec until immo indicator flashes

Programming

Program success. Press YES to program next key, NO to go back.

Test the new smart key.

Lonsdor K518ISE service center users self calculate key data

Posted on November 23, 2017 by wp-admin

With the help of Auto Key Programmer Lonsdor K518ISE product service center, user are free to calculate the key data by themselves as they will without Lonsdor engineer support. Currently this service center is able to calculate the key data of Volvo, Maserati etc.

Guide:
1. Click on http://u.lonsdor.com, click English or Chinese as you will.

2. Please input the email and password (as the same as that you registered K518ISE)

3.Select the product “Lonsdor K518ISE”

4. Select the car make you want to calculate the key data, for example. Volvo.

5. Choose the key style, for example the non-folding key which is the common key of S40, C30, C70.

6. Start to calculate the key data
1). Enter the serial number of Lonsdor K518ISE that you are using.
2) Select the car model i.e S40, C30, C70 etc.
3) Enter the right No.(2) data, then the left NO.(1) data.
4) Submit.
Tip: for the for instruction, read the “Help” file at the bottom.

7. The system will automatically calculate the key data and the page will automatically refresh until the result displays.
Tip: If the data was calculated unsuccessfully, check if the data is correct or input in the incorrect position.

8. Lonsdor K518ISE Key Programmer calculate the key data on Volvo with success, click on “Download data”, and enter the corresponding folder by following the “Operating guide”.

Lonsdor K518ISE product service center calculate key data easily

Posted on November 22, 2017 by wp-admin

Lonsdor K518ISE Key Programmer product service center is designed to help users to calculate key data whenever and wherever. The users are free to login with email and password as they will in Chinese and English. So far it can calculate data for Volvo, Maserati etc by self-service without Lonsdor engineer help.

Guide:

1.Browse: http://u.lonsdor.com

2.Please enter the email and password (Must be the account when you register K518ISE)

3.Choose product “Lonsdor K518ISE”

4.Choose the car brand you want to calculate data, i.e Volvo.

5.Choose the key type (i.e key (Non folding), that is the common key of S40, C30, C70)

6.Calculate key data operation

Bellow operation applies to other keys.

1). Input the serial number that you are using.

2) Choose the car model i.e S40, C30, C70 etc.

3) Input the right No.(2) data, then the left NO.(1) data.

4) Submit.

Note: read “Help” at the bottom for instruction.

7.The system automatically calculate data and the page will automatically refresh until the result displays.

Tip: If the data is put in the incorrect position or incorrect, the data will be calculated unsuccessfully.

8.Lonsdor K518ISE calculate key data for Volvo successfully, please click on “Download data”, and follow the “Operating guide” to input the corresponding folder.

Lonsdor K518ISE Program Ford Everest 2016 Remote Key

Posted on November 14, 2017 by wp-admin

Today tested Lonsdor K518ISE key programmer English version on a Ford Everest 2016. Working perfectly.

Program Ford Everest 2016 Remote Key with K518:

At least 2 keys are required to program smart key for Ford

Connect car key programmer Lonsdor K518 host with vehicle via OBD diagnostic socket

see the connect and OBD location

Select Immobilizer->Ford->Everest->Other Region or America ->Program Smart Key-> Add a key

Turn ignition ON

Cummuinicating…

Lonsdor K518ISE shows vehicle part number, PIN and current key number: 2

Reading pin code

Insert a new key and turn ignition ON

Programming…

Program success.

Identified number of keys: 3

Program complete

Test the remote and start vehicle

Working.

Reference:

Lonsdor K518ISE Ford Vehicle List
FORD
Series   Origin   Year   Fuel Type   Function
New Mondeo   Other   Other   Other   Key Programming
New Mondeo   Other   Other   Other   Smart Key Programming
Escort   Other   Other   Other   Key Programming
New Edge   Other   15-   Other   Smart Key Programming
Mustang   Other   Other   Other   Smart Key Programming
Kuga   USA   05-07   Other   Key Programming
Raptor F350   Other   Other   Other   Key Programming
Transit   Other   Other   Other   Key Programming
Mondeo Wins   Other   Other   Other   Smart Key Programming
Mondeo Wins   Other   2012   Other   Key Programming
Mondeo Wins   Other   2011   Other   Key Programming
Focus   Other   2004-2008   Other   Key Programming
Focus   Other   2011-2013   Other   Key Programming
Kuga   Other   Other   Other   Key Programming
Ecosport   Other   Other   Other   Key Programming
Fiesta   Other   Other   Other   Key Programming
Focus   Other   2009-2011   Other   Key Programming
Mondeo   Other   Other   Other   Key Programming
Ecosport   Other   Other   Other   Smart Key Programming
Fiesta   Other   Other   Other   Smart Key Programming
Focus   Other   14-   Other   Key Programming
Exploror   Other   11-   Other   Key Programming
Classic Focus   Other   Other   Type2   Key Programming
Kuga   Other   Other   Other   Smart Key Programming
New Edge   Other   -15   Other   Smart Key Programming
Raptor F150   Other   2011-2014   Other   Key Programming
Raptor F150   Other   2009-2010   Other   Key Programming
Raptor F250   Other   2009-2010   Other   Key Programming
Everest   Other   Other   Other   Smart Key Programming
Classic Focus   Other   Other   Type1   Key Programming
Exploror   Other   15-   Other   Smart Key Programming
Taurus   Other   15-   Other   Smart Key Programming
Everest   Other   Other   Other   Key Programming