How to use GM Tech2 to program GM Vans Cruise Control Unit

Car List:

2007-2009 Chevrolet Equinox and Pontiac Torrent mid-size crossovers
2008-2009 GM full size Vans

Equipment:
GM Tech 2 Scanner /Tech2 OBDⅡdiagnostic scan tool
CANdi module
TIS2000 software CD +soft USB key
A laptop running Win XP home

2-1

NOTE:
CANdi interface and TIS2000 software CD can be purchased separately. There are several Tech2 packages in obd2tool.com, like GM Tech2 with CANdi interface, GM Tech2 with 32 MB card and TIS2000 etc. You need to get the left stuff.

Programming cruise control with Tech 2 instruction:

Ⅰ Cruise Control Installation

Here are some picture instructions:

2-2 2-3 2-4 2-5 2-6 2-7 2-8

Ⅱ BCM programming

1. Turn the ignition to ON position
2. Connect the Tech 2 Scanner with vehicle via OBD port
3. Power up the Tech2 device. Enter the main menu
4. Select F1: Service Programming System
5. Select F0:Request Info
6. Select Continue with USB software key
7. Select vehicle model Chevrolet or Pontiac
8. Select vehicle year, like 2007
9. Select LD TRK, MPV, Incomplete
10. Select detail specific model: Equinox or Torrent
11. Follow the system prompts and select Continue with USB soft key
12. Click Yes to verify the displayed VIN and confirm it is correct
13. Turn the ignition OFF. Unplug the Tech2 scan tool from the vehicle.
14. Connect the Tech 2 to the TIS computer
15. Power up the Tech2 and start running the TIS software program
16. Select Diagnostic Tool: Car Diagnostic Tool Tech 2
17. Select Programming Process: Replace and Reprogram ECU
18. Select ECU location: Vehicle
19. Click Next until the VIN id displayed
20. Verify the VIN by click Yes and then click Next to continue.
21. Select Controller: BCM
22. Select Programming Type: Normal
There are 3 options in the program: System, Interior/Exterior Lighting and Power-train Control.
For System Select Calibration, choose #25828506-Steering Wheel Control UK3
For Interior/Exterior Lighting, choose #25828503(No Fog Lights) or #25828504(With Fog Lights)
For Power-train Control, choose #25828488-Cruise Control K34
23. Verify calibration files are correct, click Next to continue
24. When complete load data to Tech2 scanner, click Close
25. Disconnect TECH2 OBDⅡscanner from TIS2000 and vehicle
26. Turn the ignition ON and power up the Tech2 device.
27. Select F1: Service Programming System
28. Select F0: Program ECU. Verify the VIN is correct.
29. Follow the screen prompts and click Continue with USB soft key
30. Wait about 2 minutes to download the data. Then turn off the ignition for 10 sec.

Ⅲ BPP Sensor Calibration

31. Turn the ignition to ON
32. Click Continue with USB software key
33. Click Exit button to back to the Start menu and select F0-Daignostics
34. Select vehicle year: 2007
35. Select LD, MPV, Incomplete
36. Select vehicle model: Chevrolet Truck or Pontiac MPV
37. Select body: L Body
38. Select F3-Vehicle Control System
39. Select engine: (F)3.4L V6 LNJ
40. Select F2-Module Setup
41. Select Body Control Module
42. Select F0-BPP Sensor Calibration. Do not touch the brake pedal and insure that the vehicle is on park.
43. Click Continue with USB soft key. Press Exit button when all procedures are complete.

Ⅳ Primary Key Configuration

44. Select F1-Set Up SDM Primary Key in BCM, click Enter
45. Then the system will prompts: “Procedure Complete”, click Exit button
46. Turn the ignition OFF for 10sec and then start the engine
47. Back to TECH2 scanner main menu and select Diagnostics
48. Select vehicle year: 2007
49. Select LD, MPV, Incomplete
50. Select vehicle model: Chevrolet Truck or Pontiac MPV
51. Select body: L Body
52. Select F3-Vehicle Control Module
53. Select F0-Vehicle DTC Information
54. Select F0-DTC Display
55. Click View all DTCs with soft key, click Yes to Clear all DTCs.
56. Drive a road test to make sure the cruise control is working

VXDIAG VCX NANO for GMOpel with GDS2 Tech2Win

VXDIAG VCX NANO for GM/Opel/Vauxhall is finally available on obd2tool.com. The VXDIAG GM supports  GM Tech2Win and GDS2 software. It is the perfect replacement of original WIFI wireless GM MDI diagnostic scanner. It is fully compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.

22-1 22-2

 Top features  of GM  VXDIAG VCX Nano:
1. Support: GM Tech2win 2.302, GDS2 v12.0.00835.  Can replace original GM MDI WIFI system.
2. Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more
3. Firmware upgradeable
4. Quick access to vehicle data for maintenance or management reports
5. Support both WIFI and USB connection
6. GDS2 updates received via TIS2Web.

VCX Nano GM Kit support both GDS & GDS2. GDS 2 works similar to the original GDS, easier and faster.

NOTE:  Expiration date problem was fixed, tech2win still showed 42 days, gds2 still showed 30days, do not need to make lease renewal every month.

22-3
22-4
22-5

tech2 scanner will never be expiration, it always to display 42 days. Extra installed drivers and for Allscanner VXDIAG VCX NANO because it’s supported by GM Tech2Win.

22-6

VXDIAG VCX NANO for GM/OPEL FEATURES:
* Fully compatible with SAE-J2534-1 & SAE-J2534-2
* USB vehicle-to-PC connectivity
* All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
* Supports Windows? XP
* CE and FCC compliance for hardware
* Firmware Updatable

COMPATIBLE SOFTWARE:

* Support PC-based diagnostics with rollout of the Global Diagnostic System GDS & GDS2
* Support GM TIS2WEB online Service Programming System (SPS)
* Support Tech2Win application to offering a larger screen with all of the Tech 2 tool functionality
Global Diagnostic System (GDS & GDS2)

* New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles.
* GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.

VCX Nano GM Kit support both GDS & GDS2. GDS 2 works similar to the original GDS. easier and faster

GDS 2 provides the following capabilities in multiple languages:

* Read codes, code status, Freeze Frame data and Clear Codes.
* Read VIN, ECU part numbers and software numbers.
* Record, store and replay Stored data.
* Control and monitor Output Control functions.
* Configure and Reset functions.
* Record or display history of the previous vehicle diagnostic sessions.

Service Programming System (SPS)

* passthrough programming on GM past model and Global A vehicles
* Increase reprogramming speed 20-70% and get ready to service new models

For pass-through programming of electronic control units on all vehicles built since 1996 and future model releases. The VCX Nano Prime GM KIT is between 20% and 70% faster than Tech 2.For example, on a new Tahoe hybrid with 7 ECUS, it would normally take 2 full hours to reprogram. But, with VCX Nano the process is completed in just 45 minutes. That’s a 64% difference and means you could service 10vehicles rather than 4in an 8-hour day! The potential to increase revenues is dramatic.

New Vehicles Model list

VCX Nano Prime GM KIT is the only full-spectrum diagnostic and reprogramming tool capable of servicing new Delta and Epsilon vehicles (with auxiliary CAN bus that cannot be serviced by Tech2).Below  is the list of vehicles being delivered this year that will rely exclusively on this tool for service.

Tech2Win Function

Tech2Win, an application version of the tech 2 scan tool and CANdi (Control Area Network diagnostic interface) moduleTech2Win can be used during a vehicle road test, offering a larger screen with all of the Tech 2 tool functionality. The Tech2Win application offers all of the features and functions of the Tech 2 for Opel, Saab etc.

GM Tech2 Self Test Instruction

1 insert gm card into card slot of Tech 2 Scanner

18-1
2 Connect self-test adapter with Auto Scanner Tool Tech2, then power on machine

18-2

3 Enter Main menu then choose F4: tool options

18-3

4 Choose F3: SELF-TEST

18-4

5 Press “Exist” to continue

18-5

6 Choose Tech 2 self-test

18-6

7 Automated VCI

18-7

8 VCI self-test result

18-8