(Tested) Autel DS708 read pin code program key for Vauxhall Meriva

This blog will share a success case: using Autel MaxiDAS DS708 to read pin code then program remote key for Vauxhall Meriva 1.7 CDTi 2004! Below is procedure for your reference.

22-1

How use MaxiDas DS708 read pin code program key for Vauxhall Meriva?

First connect autel scan tool DS708 with Vauxhall Meriva via OBD port. Use a new remote key to turn ignition on. The immobilizer light will lit in dashboard.

22-2

Choose “European” menu then select “Vauxhall” brand.

Go to “System Menu” and choose “Get security code”

22-3

The PIN code is read out as “8121”!

22-4

Choose “Body” then “Body Control Module”

22-5

Click “Special Function” and choose “Program remote key”

Enter the PIN code 8121

22-6
Press one of the remote key buttons

Then a new Vauxhall Meriva remote key is programmed successfully by MaxiDAS DS808!

22-7

Guide use Autel MaxiDAS DS808 diagnose Mercedes-Benz successfully

2-2

This post is about How to Autel MaxiDAS DS808 diagnose Mercedes-Benz successfully

Let’s unpack and unbox the Autel MaxiDAS DS808 and see together what it will do out of box no registration, no update, no nothing.

2-3

So let’s go ahead to plug the OBDII cable to the DS808 for the first time

2-3

Press the power button at the top, and you can slide the lock button.
2-4 2-5

Both of my previous scanners one goes for 150 dollar and another one reaches 400 dollars are not able to access to the computer of airbags, so let’s see out of box without any updates and registration of this Autel Scan Tool MaxiDas DS808 scanner can do for you.

As you can see, a red warning SRS light and watch the information sent, and it’s the reason why I need to get back DS808 scanner and find out what is happening to the vehicle.

2-6

Here you are, the MaxiDAS DS808 scanner is connected to the OBDII port of vehicle and the ignition is on.

2-7

So let’s see what we can do, let’s go to diagnostic.

2-8

Definitely go for “Automatic selection”

2-9

I don’t want to tap the VIN, so I will read it automatically.

2-10
And here you are, it is really pretty fast, this is absolutely awesome.

The new generation scan tool is super fast.

2-11

I know this Benz is 2004, so I will click “From 09/2003 to 12/2007.
2-12

Please select the steering left or right, all right , I click “Left”

2-13

Confirm vehicle profile, let’s say yes.

2-14

Yes “Diagnosis”, so you can see fast it goes.

2-15

I’ll go for “Auto scan”

2-16

Try to read fault code

No fault codes detected.
2-17

But I’m just confusing where is the airbag problem.

This is next screen we can see, the ME-SFI 2.8 Motor electronics 2.8 has no faults, but I want to go for airbag computer

2-18

So let’s exit to “Diagnostic menu” and select “Control Unit”, and click on “Body” then “AB-airbag” all right. No communication between the tester and control unit.

2-19 2-20

So, the reason is No register and No update MaxiDAS DS808 for Mercedes Benz from OBD2TOOL , only after register that it will start working. Registering the device was easy, you simply go to autel’s website and set up an account. Once you do that you take the registration code/ passcode from the scan tool and register it on the website. You then make sure that the scan tool is hooked up to your wifi which is setup in settings. Then you are ready to update the scan tool with the latest software.

That’s all

Thanks and enjoy your time.

What is difference of Autel Maxidas DS808 and Autel DS708 MaxiSYS MS906

Autel Maxidas DS808 and Autel MaxiSYS 906,both of them can replace AUTEL DS708.What is new features of new generation of MaxiDAS DS808?And what is difference of Autel MaxiDAS DS808 and Autel MaxiSYS MS906? Here, OBD2TOOL will show you 3 items comparison to help you choose the suitable Autel Scanner.

DS808-2-1

Basic information comparison table among Autel Ds708 scanner, Autel MaxiSYS MS906, Autel DS808 standard package and Autel DS808K full package.

Autel Autel MaxiDas DS808K (Full kit) Autel  DS808 Autel MS906 Autel DS708
DS808-2-2 DS808-2-3 DS808-2-4 DS808-2-5
Price $745 DHL Free  $828 DHL Free    $1,079   $799
CPU Cortex-A9 processor (1.5 GHz) Cortex-A9 processor (1.5 GHz) Samsung Exynos 6-Core Processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15) Samsung S3C2440 ARM9 Processor 400 MHz
OS Android™ 4.4.4 Android™ 4.4.4 Android™ 4.4.2, KitKat Windows CE
SSD Hard Drive 32GB 32GB 32GB
Touch Screen Display 7″ LCD 1024×600 resolution touch scrren 7″ LCD 1024×600 resolution touch scrren 8″ 1,024×768 LED-backlit glossy Multi Touch capacitive display with IPS technology 7.0″ 800×480 TFT Resistive Touch Screen
Connectivity ? Mini USB 2.0 ? USB 2.0 ? Wi-Fi ? Micro SD card (supports up to 32GB) ? Mini USB 2.0 ? USB 2.0 ? Wi-Fi ? Micro SD card (supports up to 32GB) Wi-Fi (802.11 b/g/n), DB16 DLC, USB 2.0, SD Card (Support up to 32GB) USB 2.0, Ethernet, Wi-fi
Wifi 802.11b/g/n Wi-Fi 802.11b/g/n Wi-Fi 802.11b/g/n Wi-Fi 2.4 GHz
Internal Battery 3.7 V/3200 mAh lithium-polymer battery 3.7 V/3200 mAh lithium-polymer battery 3.7V/5000 mAh lithium-polymer battery
Weight(Display)  788 g (2.42 lb.) 788 g (2.42 lb.) 0.96 kg (2.12 lb.) 1.1kg (2.95lb)
Camera(rear) 8.0 Megapixel, AF with Flashlight N/A
Wireless VCI Yes Yes Yes
Boot Up Time Less than 40 seconds Less than 40 seconds Less than 40 seconds 40 Seconds
Complete OEM-Specific Scanner Coverage Yes Yes Yes Yes
AutoVIN Technology Yes Yes Yes
MaxiFix Cloud-Based Information System Yes Yes Yes
Shop Manager Yes Yes Yes
ECU coding Minimum Minimum Minimum Minimum
ECU Flash Programming N/A N/A N/A N/A
J2534 Hardware included N/A N/A N/A N/A
Default Language English, pay to change other language English; pay to change other language English English, Spanish, French, German, Portuguese and Russian
Subscription-Based On-Line Updates Yes Yes Yes Yes
Warranty Yes Yes 1 year 1 year

The Advantage of AUTEL MaxiDAS DS808 KIT

What is advantage of AUTEL MaxiDAS DS808 KIT Tablet Diagnostic Tool Full Set?

Autel MaxiDAS DS808 is featured with an extensive coverage of OE-level diagnostics . Installed with a fast quad-core processor, DS808K offersmaximum convenience and efficiency for your diagnosis and analysis .  It can support Injector & Key Coding if you have original programmer software.

 

2-1

 

One customer feedback for AUTEL MaxiDAS DS808 KIT:

I think DS708 is the first generation of iconic device for Autel, because of its reasonable price and cost efficient function. I owned one DS708 for many years, but regret that it will not be updated any more. So I intended to add its new extended version- DS808 for my small repair shop, which can fully meet my requirements. Its new CPU and LCD touch screen, dramatically improved the entire users’ experience, much more smooth comparing with DS708. Personally, I would recommend this tool for those small shops with limit budgets.

AUTEL MaxiDAS DS808K Full Set VS MaxiDAS DS808:

 

Same: same functions and same MUX specification

difference:

1.DS808K is full set, MaxiDAS DS808 is standard set . Please confirm by checking their packge list.

2.DS808K can support OBD-I OBD-II protocols vehicle before 1998 year,DS808 only support OBD-II cars.

3.DS808 kit is just USD845 and can be updated on line two years on line. (we have purchase one more year for our customers)DS808 is USD849, just update on line one year. We think DS808kit is more better than DS808 and it can support more model cars than DS808.

 

2-2

 

Basic information comparison table among Autel Ds708 scanner, Autel MaxiSYS MS906, Autel DS808 standard package and Autel DS808 full package.

Autel Autel MaxiDas DS808 (Full kit) Autel MaxiDas DS808 Autel MaxiSYS MS906 Autel MaxiDas DS708
Price $845 free shipping  $849 free shipping    $1,350   $799
CPU Cortex-A9 processor (1.5 GHz) Cortex-A9 processor (1.5 GHz) Samsung Exynos 6-Core Processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15) Samsung S3C2440 ARM9 Processor 400 MHz
OS Android™ 4.4.4 Android™ 4.4.4 Android™ 4.4.2, KitKat Windows CE
SSD Hard Drive 32GB 32GB 32GB
Touch Screen Display 7″ LCD 1024×600 resolution touch scrren 7″ LCD 1024×600 resolution touch scrren 8″ 1,024×768 LED-backlit glossy Multi Touch capacitive display with IPS technology 7.0″ 800×480 TFT Resistive Touch Screen
Connectivity • Mini USB 2.0 • USB 2.0 • Wi-Fi • Micro SD card (supports up to 32GB) • Mini USB 2.0 • USB 2.0 • Wi-Fi • Micro SD card (supports up to 32GB) Wi-Fi (802.11 b/g/n), DB16 DLC, USB 2.0, SD Card (Support up to 32GB) USB 2.0, Ethernet, Wi-fi
Wifi 802.11b/g/n Wi-Fi 802.11b/g/n Wi-Fi 802.11b/g/n Wi-Fi 2.4 GHz
Internal Battery 3.7 V/3200 mAh lithium-polymer battery 3.7 V/3200 mAh lithium-polymer battery 3.7V/5000 mAh lithium-polymer battery
Weight(Display) 788 g (2.42 lb.) 0.96 kg (2.12 lb.) 1.1kg (2.95lb)
Camera(rear) 8.0 Megapixel, AF with Flashlight N/A
Wireless VCI Yes Yes Yes
Boot Up Time Less than 40 seconds Less than 40 seconds Less than 40 seconds 40 Seconds
Complete OEM-Specific Scanner Coverage Yes Yes Yes Yes
AutoVIN Technology Yes Yes Yes
MaxiFix Cloud-Based Information System Yes Yes Yes
Shop Manager Yes Yes Yes
ECU coding Minimum Minimum Minimum Minimum
ECU Flash Programming N/A N/A N/A N/A
J2534 Hardware included N/A N/A N/A N/A
Default Language English, pay to change other language English; pay to change other language English English, Spanish, French, German, Portuguese and Russian
Subscription-Based On-Line Updates Yes Yes Yes Yes
Warranty Yes Yes 1 year 1 year

 

Why you should purchase AUTEL MaxiDAS DS808 KIT from OBD2TOOL?

  1. Firstly, we are legal disturber of Autel company, we offer original Autel all products.
  • Secondly, we can offer two years free update for our customers who buy Autel products from us, the customer can save a big amount money for next udpate on line.
  • Thirdly, we have a strong techonical support team, we can solve all problems at once when our customers meet problem.

 

How to use Autel DS808 Read/Erase Honda Ridgeline Error Code

Autel DS808K is full set with all adapters,Autel DS808 is standard set,and here we will display the detailed steps for Autel DS808 Read/Erase Honda Ridgeline Error Code.

1.Start Auto Scanner Tool MaxiDAS DS808,and choose Diagnosis.And Honda car brand in Asia.

12-1
2.Enter Diagnosis,and Choose “Automatic Selection”.Enter VIN,click Read to acquire VIN.

12-2 12-3 12-4
3.Click OK after read VIN.Choose USA.

12-5 12-6

4.Choose Diagnosis.Then “Auto Scan”,it will list out scanning result.

12-7 12-8 12-9

5.From the result,Body electronic and TPMS shows Fault.

12-10

6.Choose Body electronic to enter.And choose “Keyless Transmitter”.Then click “read codes”.

12-11 12-12 12-13

7.It will display the error result.Then click “Erase Codes”

12-14 12-15

How to use Autel MaxiDAS DS808 Diagnostic System

It’s a part of Autel MaxiDAS DS808K diagnostic scanner system manual of how to use it for vehicle obdii diagnosis (incl. special functions).

5-1

Autel MaxiDAS DS808 Diagnostic System User Manual

The Autel DS808 diagnostics application allows you to establish a data link to the electronic control system of the test vehicle for vehicle diagnosis. You can operate functional tests, retrieve vehicle diagnostic information such as trouble codes, freeze frame data and live data for various vehicle control systems, such as engine, transmission, ABS, and more. The Vehicle Diagnostics screen has 2 main options:
5-2

1.Diagnosis – a comprehensive section which includes all available functions: reading, clearing, saving and printing diagnostic information, as well as performing active tests and special functions.
2.Hot Function – a separate section designed to perform vehicle scheduled service and maintenance, such as to reset the service lights and perform calibration for various systems.

After a section is selected and the tablet establishes communication with the vehicle, the corresponding function menu or selection menu displays.

Diagnosis

There are two options available when accessing the Diagnosis section:

1.Auto Scan – starts auto scanning for all the available systems on the vehicle.
2.Control Units – displays a selection menu of all available control units of the test vehicle.

After a section is selected and the tablet establishes communication with the vehicle, the corresponding function menu or selection menu displays.

Auto Scan

The Auto Scan function performs a comprehensive scanning over all the ECUs in the vehicle’s systems in order to locate and retrieve DTCs. The sample operation screen of Auto Scan displays as below:

5-3

Control Units

This option allows you to manually locate a required control system for testing through a series of choices. Please follow the menu driven procedures and make proper selection each time. The program will guide you to the diagnostic function menu after a few choices you’ve made.

5-4

The Function Menu options vary slightly for different vehicles. The function menu may include:

1.ECU Information – provides the retrieved ECU information in detail. Tap to open an information screen.
2.Trouble Codes – includes Read codes and Erase codes functions. Displays detailed information of DTC records retrieved from the test vehicle’s ECU and erases DTC records and other data from the test vehicle’s ECU.
3.Freeze Frame – displays the freeze frame data of the DCTs.
4.Live Data – retrieves and displays live data and parameters from the test vehicle’s ECU.
5.Active Test – provides specific subsystem and component tests. This selection may appear as Actuators, Actuator Test, or Function Tests, etc., and the tests options vary depending on the manufacturer and model.

NOTE

With the diagnostic toolbar on top of the screen throughout the whole diagnostic procedures, you are allowed to make various controls of the diagnostic information at any time, such as printing and saving the displayed data, getting help information, or performing data logging, etc.

How to use Autel MaxiDAS DS808 to perform a diagnostic function:

1.Establish communication with the test vehicle.
2.Identify the test vehicle by selecting from the menu options.
3.Select the Diagnosis section.
4.Locate the required system for testing by Auto Scan or through menu driven selections in Control Units.
5.Select the desired diagnostic function from the Function Menu.

ECU Information

This function retrieves and displays the specific information for the tested control unit, including unit type, version numbers and other specifications.

The sample ECU Information screen displays as below:

5-5

Read Codes

This function retrieves and displays the DTCs from the vehicle’s control system. The Read Codes screen varies for each vehicle being tested. On some vehicles, freeze frame data can also be retrieved for viewing. The sample Read Codes screen displays as below:
5-6

Erase Codes

After reading the retrieved codes from the vehicle and certain repairs have been carried out, you can erase the codes from the vehicle using this function.

Before performing this function, make sure the vehicle’s ignition key is in the ON (RUN) position with the engine off.

How to erase codes via Autel DS808 Scanner:

1.Tap Erase Codes from the Function Menu.
2.A warning message displays to inform you of data loss when this function is applied.
a) Tap Yes to continue. A confirming screen displays when the operation is successfully done.
b) Tap No to exit.
c)Tap ESC on the confirming screen to exit Erase Codes.
3.Perform the Read Codes function again to check if the code erasing is successful.

Live Data

When this function is selected, the screen displays the data list for the selected module. The items available for any control module vary from one vehicle to another. The parameters display in the order that they are transmitted by the ECM, so expect variation between vehicles.

Gesture scrolling allows you to quickly move through the data list. Simply swipe the screen up or down to locate the data you want. The figure below shows a typical Live Data screen:

5-7

Display Mode

There are 4 types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way.

Tapping the drop-down button on the right side of the parameter name opens a submenu. There are 4 buttons to configure the data display mode, and one Help button on the right that you can tap for additional information.

Each parameter item displays the selected mode independently.

1) Analog Gauge Mode – displays the parameters in form of an analog meter graph.
2) Text Mode – this is the default mode which displays the parameters in texts and shows in list format.
3) Waveform Graph Mode – displays the parameters in waveform graphs. When this mode is applied, three control buttons will appear on the right side of the parameter item, allowing you to manipulate the display status.
4) Digital Gauge Mode – displays the parameters in form of a digital gauge graph.

Full Screen Display – this option is only available in the waveform graph mode and mostly used in Graph Merge status for data comparison.

There are three control buttons available on the top right side of the screen under this mode.

How to edit the waveform color and line thickness in a data graph

1.Select 1 to 3 parameter items to display in Waveform Graph mode.
2.Tap the Zoom-in Button on the right to display the data graph in full screen.
3.Select a parameter item on the left column.
4.Select a desired sample color from the middle column.
5.Select a desired sample line thickness from the right column.
6.Repeat step 3-5 to edit the waveform for each parameter item.
7.Tap Done to save the setting and exit, or tap Cancel to exit without saving.

Setting Mode in Live Data

5-8

Active Test

The Active Test Auto Scanner Tool is used to access vehicle-specific subsystem and component tests. Available tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu.

During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch between two operating states.

Selecting Active Test opens a menu of test options that varies by make and model. Selecting a menu option activates the test. Follow on-screen instructions while performing tests. The content and pattern of the on-screen information vary according to the type of test being performed. Some toggle and variable control tests display Active Test Controls at the top of the screen with data stream information below, or vice versa.

5-9

The functional buttons at the lower right corner of the Active Test screen manipulate the test signals. The operational instructions are displayed on the main section of the test screen. Simply follow the on-screen instructions and make appropriate selections to complete the tests. Each time when an operation is successfully executed, message such as “Command Finished”, “Activation Successful”, or something similar displays.

Tap the ESC functional button to exit the test when finished.

Special Functions

These functions perform various component adaptations, allowing you to recalibrate or configure certain components after making repairs or replacement.

The main menu displays the supported special functions for the test vehicle.

Follow the on-screen instructions to complete the desired function. When the operation is done, an execution status message such as Completed, Finished or Successful, displays. Tap the ESC button to exit the function.

5-10
Hot Functions

The Service section is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations.

The most commonly performed service functions include:

1.Oil Reset Service
2.TPMS Programming Service
3.EPB Service
4.ABS/SRS Services
5.SAS Calibration Service
6.DPF Regeneration Service

Oil Reset Service

This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.

Tire Pressure Monitor System (TPMS) Service

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.

Electric Parking Brake (EPB) Service

This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

ABS/SRS Services

This function allows you to perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.

Steering Angle Sensor (SAS) Service

This service function allows you to perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared.

DPF Regeneration Service

The Diesel Particulate Filter service function performs the regeneration procedure which is the DPF cleaning operation to clear the blockage through continuous burning of the particulate matter captured in the DPF filter. If the DPF light on the vehicle comes on and you successfully complete a DPF regeneration cycle, you will notice that the DPF light will automatically turn off.

Tip: Hot search words related to Autel DS808:

Autel MaxiDAS DS808 vs. Autel DS708

1. Autel DS808 adopt Android 4.4.4 operating system with higher CPU, running faster than DS708. More user-friendly.
2. Autel DS808 adds Smart AutoVIN, Cloud-based MaxiFix and shop manager functions that ds708 does not have.
3. MaxiDAS DS808 functions almost the same as MaxiSys MS906.

 
Autel maxidas ds808 registration:

How-to guide at How to register Autel MaxiDAS DS808 scanner

Autel maxidas ds808 update:

Automatic system and software updates with real-time push message notifications via Wi-Fi

Autel ds808 update cost:

Free to update within one year

Autel maxidas ds808 key programming:

NO!!! The Ds808 cannot program car keys. For key programming via Autel scan tools, you are advised to use a Autel MaxiSys MS908P scanner.

Autel maxidas ds808 problems:

So far, obd2tool.com didn’t received any complaint about Autel ds808. For any experience of autel maxidas ds808 review you wanna share with all, please send it to Sales@obd2tool.com. For any issues you have, please contact our customer service and we’ll try our best to help you.

2017 New Arrival Autel MaxiDAS DS808

2017 New Arrival AUTEL MaxiDAS DS808 key coding Auto Diangostic Tool Perfect Replacement of Autel DS708 Scanner Handheld Touch Screen Autel Diagnostic Tools Free Update Online same function as MS906

http://www.obd2tool.com/goods-6882-AUTEL+MaxiDAS+DS808+Kit+Android+Tablet+Diagnostic+Tool.html

http://forobd2tool.com/wp-content/uploads/2017/07/5/1-2.jpg

AUTEL MaxiDAS DS808 full set VS MaxiDAS DS808:
The only difference: DS808 is full set, MaxiDAS DS808 is standard set. Please confirm by checking their packge list.
Same: same functions and same MUX specification

MaxiDAS DS808 (With Conkit) Features:
Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
Exceptional OE-Level system coverage for all electronic systems
Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, etc.
Smart AutoVIN technology for identifying vehicles easily
Automatic system and software updates with real-time push message notifications via Wi-Fi
Instant remote control tech support anytime, anywhere
Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes
Interactive Data Logging sessions enable direct contact with Autel Technical Support for first-hand troubleshooting of diagnostic bugs and errors
One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
Convenient data management system for managing internal program applications and reviewing data

Note: There are two options available when accessing the Diagnosis section:

1. Auto Scan – starts auto scanning for all the available systems on the vehicle.
2. Control Units – displays a selection menu of all available control units of the test vehicle.

After a section is selected and the Autel Scanner establishes communication with the vehicle, the corresponding function menu or selection menu displays.

Supported Automotive Protocols:
ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6

How to update Autel DS808 (With Conkit) software:
1. Make sure the Display Tablet is connected to a power source with stable access to the internet.
2. Tap the Update application button from the MaxiDAS Job Menu;
or tap the update notification message when received one;
or tap the Update icon on Vehicle Menu in Diagnostics application.
The Update application screen displays.
3. Check all available updates:
If you decide to update all the items, tap the Update All button.
If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).
4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume
from the break point.
5. When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

MaxiDAS DS808 (With Conkit) Specifications:
Operating System:Android? 4.4.4
Processor:Cortex-A9 processor (1.5 GHz)
Memory :32GB
Display:7-inch LCD capacitive touchscreen with 1024×600 resolution
Connectivity:? Mini USB 2.0 ? USB 2.0 ? Wi-Fi ? Micro SD card (supports up to 32GB)
Sensors:Ambient light sensor for brightness auto changing
Audio Input/Output:? Input: N/A ? Output: buzzer
Power and Battery:? 3.7 V/3200 mAh lithium-polymer battery ? Charges via 5 VDC power supply
Tested Battery Life:Around 4.5 hours of continuous use
Battery Charging Input:5 V/1.5 A
Power Consumption:500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp:-10 to 60°C(14 to 140°F)
Storage Temp:-20 to 70°C (-4 to 158°F)
Operating Humidity:5% – 95% non-condensing
Dimensions (W x H x D):237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”)
Net Weight:788 g (2.42 lb.)

Package Includes:
1pc x USB External
1pc x Power Adapter
1pc x USB External Power AdapterUser
1pc x ManualQuick reference guide
1pc x Main cable
1pc x Mini USB Cable
1pc x User Manual
1pc x Quick Guide
1pc x Benz-14
1pc x Chrysler-16
1pc x BMW-20
1pc x Kia-20
1pc x Nissan-14
1pc x GM/Daewoo-12
1pc x Honda-3
1pc x VW/AUDI-2+2
1pc x Mitsubishi/Hyundai-12+16
1pc x Benz-38
1pc x PSA-2
1pc x Fiat-3

1-1

Basic information comparison table among Autel Ds708 scanner, Autel MaxiSYS MS906, Autel DS808 standard package and Autel DS808 full package.

http://forobd2tool.com/wp-content/uploads/2017/07/5/1-1.jpg