How to change hard disk format to AHCI

When the GM MDI 2 hard drive format setting is incorrect, it may cause the computer blue screen problem.
Screen as below:

How-to-change-hard-disk-format-to-AHCI-1

“A problem has been detected and windows has been shut down to prevent damage to your computer.”
“Check for viruses on your computer. Remove any newly installed hard drives or hard controller. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/ F to check for hard drive corruption, and then restart your computer.”
Technical information:
STOP: 0x0000007B(0xFFFFF880009A97E8. 0xFFFFFFFFC0000034. 0x0000000000000000. 0x0000000000000000)

So how to solve the hard disk format?
Step1. Restart computer, continuous press F1/F4/F12 button to access bios version.
(*Different computers may need to press different buttons. )
Step2. Continue >> Config >> Serial ATA(SATA) >> SATA Controller Mode Option: AHCI >> Change value to AHCI

How-to-change-hard-disk-format-to-AHCI-2
How-to-change-hard-disk-format-to-AHCI-3
How-to-change-hard-disk-format-to-AHCI-4
How-to-change-hard-disk-format-to-AHCI-5
How-to-change-hard-disk-format-to-AHCI-6

Problem was solved!